• 한국조경학회지
• /
• 제27권4호
• /
• pp.50-58
• /
• 1999

This study was carried out to investigate the growth characteristics and propagation methods of L. obtusiloba as a woody landscape plant. The results are obtained as follows: L. obtusiloba was dioecious shrub and shaped with bush type. Leaves were ovate, obtuse, cordate, 7.05 cm long, 7.20 cm wide, and petiole 2.0 cm long. Flowers of L. obtusiloba were diclinous. Soil acidity ranged from pH 4.06 to 5.53 with the lowest at the Mt. Soo-Ri. Mt. Soo-Ri located near factory district, which was considered to damaged by environmental deteoration. While soil organic matter was highest at Mt. Soo-Ri, inorganic nutrients were low. L. obtusiloba grows in the area with low soil acidity and low content of inorganic. Therefore it seemed to be tolerant to air pollution. L. Obtusiloba was high seed germination rate in the plug box and its shoots were longer than seeding box and softwood cutting of L. obtusiloba showed the rooting rate of 50% at 5,000ppm on June 23. To develop a mass propagation method of Korean native L. obtusiloba through an axillary bud culture as a woody landscape plant, about 2∼3 cm shoots induced from explant were subcultured to new media contained different growth regulators. Shoots multiplied most effectively on a WPM containing 1.0 mg/l BA, producing 5.5 shoots with a shoot length of 2.5 cm per shoot explant.

• 한국정보통신학회논문지
• /
• 제17권7호
• /
• pp.1558-1563
• /
• 2013

본 논문에서는 시간영역에서 완전도체 접지평면 위 수직 전기 다이폴에서 방사되는 전자기해석을 통해 전파의 거리에 따른 전파경로손실을 해석하였다. 자유공간에서 수직 전기 다이폴의 해석은 시간영역과 주파수영역에서 많은 연구가 이루어졌으나 본 논문에서는 특히 접지면 위 수직 다이폴을 기지국으로 가정한 전파경로손실특성을 시간영역에서 해석하였으며 접지면의 영향으로 나타나는 근접장의 위치변화와 모바일에서 수신되는 과도응답을 관찰하였다. 본 논문의 결과는 지표면 레이더 및 신호처리 분야에 응용될 수 있을 것이다.

• International Journal of Fluid Machinery and Systems
• /
• 제8권1호
• /
• pp.55-62
• /
• 2015

This study aims to present a hydraulic transitory study as MOC applications for solving the Saint-Venant equations in two case studies: 1) in a penstock of a small hydropower system as a simple pipeline in the case of valve-closure in the downstream boundary with a reservoir in the upstream boundary; and 2) for discharge propagation into a channel by velocity and depth of the flow channel along space evaluation. The proposed methodology by Chaudry [5] concerning the development of hydrodynamic models was used. The obtained results for first and second case study has been confirmed that MOC numerical approach is useful for several engineering purposes, including cases of hydraulic transients and discharge propagation in hydraulic systems.

• 대한기계학회논문집A
• /
• 제29권11호
• /
• pp.1472-1479
• /
• 2005

Multiple surface crack distributed randomly along a weld toe influences strongly on the fatigue crack propagation life of welded joint. It is investigated by using statistical approaches based on series of systematic experiments. From the statistical results, initial crack numbers and its locations follow the normal distribution, and the probability of initial crack depths and lengths can be described well by tile Weibull distribution. These characteristics are used to calculate the fatigue crack propagation life, in which the mechanisms of mutual interaction and coalescence of the multiple cracks are considered as well as the Mk-factors obtained from a parametric study on the crack depths and lengths. The automatic calculation is achieved by the NESUSS, where the parameters such as the number, location and size of the cracks are all treated as random variables. The random variables are dealt through the Monte-Carlo simulation with sampling random numbers of 2,000. The simulation results show that the multiple cracks lead to much shorter crack propagation life compared with those in single crack situation. The sum of the simulation and tile fatigue crack initiation life derived by the notch strain approach agrees well with the experiments.

• 대한기계학회논문집A
• /
• 제31권6호
• /
• pp.701-709
• /
• 2007

To clarify the characteristics of surface damage due to fretting in press-fitted shaft, experimental methods were applied to small scale specimen with different bending load condition. Fatigue tests and interrupted fatigue tests of press-fitted specimen were carried out by rotate bending fatigue test. Macroscopic and microscopic characteristics were examined using scanning electron microscope (SEM), optical microscope or profilometer. It is found that small fatigue cracks are nucleated early in life regardless of bending stress, and thus the most portion of fatigue life on press fits can be considered to be crack propagation process. Most of surface cracks are initiated near the contact edge, and multiple cracks are nucleated and interconnected. Furthermore, the fretting wear rates at the contact edge are increased rapidly at the initial stage of total fatigue life. It is thus suggested that the fatigue crack nucleation and propagation process is strongly related to the evolution of surface profile by fretting wear in press fits.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.143-150
• /
• 2003

Experimental research has been carried out to investigate the characteristics of the fatigue crack initiation and propagation behavior of Tailor Welded Blank(TB) sheet used for vehicle body. We used three types of specimens which were machined of the same base metal: one is 1.4mm thick, another is 1.6mm thick, and the third(TB specimen) is laser-welded of two specimens(1.4mm and 1.6mm thick ones). The results of tensile and hardness test indicate that the yield strength of the TB specimen is the highest, and the hardness around welding bead is higher than that of base metal. Fatigue strength and fatigue limit of the TB specimen are much superior to those of the base metal up to $10^6$ cycles. The fatigue crack propagation of the heat-affected zone of the TB specimen is slower than that of the base metal. Welding bead has the fastest crack Propagation in the low stress intensity factor range$(\DeltaK)$ region, but the slowest in the high $\DeltaK$ region. The fatigue propagation characteristic of the TB specimen is relatively stable in comparison with that of the base metal in the high ${\Delta}K$ region around over $28MPa\sqrt{m}$.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.565-572
• /
• 2010

It is difficult to predict the accurate fatigue life of the ship structure because of load uncertainty and load redistribution at the ship structure members. As one of studies for accurate evaluation and prediction of fatigue life, it is a promising way to detect the crack previously by attaching the Fatigue Indicator Sensor (FIS) at the crack prediction region. In order to predict the fatigue life of the ship structure by using FIS, it is required to know previously the crack propagation characteristics according to pre-notch shapes. In this study, we obtained the stress distribution phase, stress concentration factors and stress intensity factor of various pre-notch shapes through FEA. Additionally, we conducted the fatigue test and obtained the characteristics of crack propagation according to the pre-notch shapes through comparison between the fatigue test and the FEA. Consequently, we classified the pre-notch shape into 3 categories: Long, Medium, and Short life type. On the basis of the numerical and experimental results, the FIS can be developed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.864-870
• /
• 2001

Flame propagation along vortex tube was experimentally investigated. The vortex tube was generated by the ejection of propane from a nozzle through a single stroke motion of a speaker and the ignition was induced from a single pulse laser. Non-reactive flow fields were visualized using shadow technique. From these images, vortex ring size and translational velocity were measured in order to determine the ignition time and position. Flame structure and flame speed were measured using high speed CCD camera. Flame speed was accelerated during the initial stage of flame kernel growth, and reached near constant value during steady propagation period. Near the completion of propagation, flame speed was decelerated and then extinguished. Flame speed along the non-premixed vortex tube was found to be linearly proportional to circulation, which was similar to that of the flame propagation along premixed vortex ring. Ignition position minimally affects the propagation characteristics. These imply that flame is propagating along the maximum speed locus expected to be along stoichiometric contour and also support the existence of tribrachial flames.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.316-325
• /
• 1986

본 연구에서는 이상배합조직강에 있어서 피로균열진전거동의 미시조직 의존 성을 밟히기 위하여 제이상 마르텐사이트가 모상 페라이트를 둘러싼 마르텐사이트페라 이트 복합조직강을 준비하고 미시조직이 각각 다른 4종류의 시험편에 대하여 피로시험 을 실시한후 이에 의해 얻어진 피로균열진전속도를 균열휨과 균열닫힘을 통하여 검토 하였다.

• 한국통신학회논문지
• /
• 제37권3B호
• /
• pp.212-218
• /
• 2012

인터넷 웜은 컴퓨터 네트워크를 이용하여 자기 자신을 자동으로 복제해서 전파하는 프로그램이다. 컴퓨터간의 네트워크 연결이 증가함에 따라 인터넷 웜은 급격해 확산되었고 큰 위협으로 남아있다. 코드 레드, 님다, 슬레머 같은 인터넷 웜의 특성과 이들의 활동을 억제하는 방법을 찾기 위해서 웜이 전파되는 특성을 연구하려는 많은 시도가 있었다. 네트워크 특징들이 인터넷 웜 전파에 미치는 영향은 모델의 간단성과 유사성 때문에 주로 의학계에서 사용되는 전염병 전파 모델을 이용하여 모델링이 되었다. 이런 의학계 모델링은 널리 사용되면서 여러 개선된 모델들이 다양하게 제안되었다. 우리는 이전의 제안된 모델들의 문제점을 분석한 후 통계적 방법을 사용하여 정확도를 높이는 새로운 방법의 웜 전파 모델링을 제안한다.