• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.65-71
• /
• 2005

At present, Electronic industries push ahead to eliminate the Pb(Lead) -a hazardous material-from all products. Especially, we have performed to select the optimum standard composition of lead free alloy for the application to products for about 3 years from 2000. These days, we have the chance for applying to the mass-production. This project constructed the system for applying the lead free solders on consumer electronic products, which is one of the major products of the LG Electronics. To select the lead free solders with corresponding to the product features, we have passed through the test and applied with Sn-3.0Ag-0.5Cu alloy system to our products, and for the application to the high melting temperature composition, we secured the thermal resistance of the many parts and substrate and optimized the processing conditions. We have operated the temperature cycling test and the high temperature storage test under the standards to confirm the reliability of the products. On these samples, we considered the consequence of our decision by the operating test. For the long life time of the product, we have operated the temperature cycling test at $-45^{\circ}C\;-\;+125^{\circ}C$, 1 cycle/hour, 1000 cycles. Also we have tested the tin whisker growth about lead free plating on lead finish. We have analyzed with the SEM, EDS and any other equipment for confirming the failure mode at the joint and the tin whisker growth on lead free finish.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2007년도 추계학술발표회
• /
• pp.51-55
• /
• 2007

As for satellite programs, the multipurpose satellite 1(KOMPSAT-1) was successfully launched on Dec. 21, 1999 and operated for three years. It is still properly operated even though its life cycle was ended. The development of KOMPSAT-2 (Korea Multipurpose Satellite-2) is near completion and the development of KOMPSAT-3, KOMPSAT-5 and COMS (Communication, Ocean, Meterological Satellite) are proceeding swiftly. In KORDI(Korea Ocean Research and Development Institute), the KOSC (Korea Ocean Satellite Center) construction project is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI(Geostationary Ocean Color Imager) instrument which is loaded on COMS(Communication, Ocean and Meteorological Satellite); it will be launched in 2000. Ansan(the headquarter of KORDD has been selected for the location of KOSC between 5 proposed sites, because it has the best condition to receive radio wave. The data acquisition system is classified antenna and RF. Antenna is designed to be ${\emptyset}$ 9m cassegrain antenna which has 19.35 $G/T(dB/^{\circ}K)$ at 1.67GHz, RF module, is divided into LNA(Low noise amplifier) and down converter, those are designed to send only horizontal polarization to modem The existing building is re-designed and classified for the KOSC operation concept; computing room, board of electricity, data processing room, operation room Hardware and network facilities have been designed to adapt for efficiency of each functions. The distribution system which is one of the most important systems will be constructed mainly on the internet, and it is also being considered constructing outer data distribution system as a web hosting service for to offering received data to user under an hour.

• 한국수자원학회논문집
• /
• 제42권9호
• /
• pp.759-771
• /
• 2009

장거리 용수공급 시스템에서 전력비용은 전체 운영비용의 큰 부분을 차지한다. 본 연구는 시간단위의 펌프와 배수지 시스템의 최적 운영계획을 평가하기 위해 동적계획기법에 기초한 방법론을 제시하고 있다. 해석방법은 운영비용 최소화 관점에서 펌프용량 확대를 전제로 현재 가용 펌프의 효율적 운전과 전력요금체계, 시간별 용수수요 추이 그리고 배수지 특성과 송수관로의 제약조건 등을 고려하였다. 이를 위해 적용 가능한 시스템 운영목적과 제약조건이 제시되었고 개발된 방법은 수도권 광역상수도 양주계통의 2개 가압장과 5개 배수지를 대상으로 적용하였다. 적용결과는 펌프 확장의 경우 상당한 수준의 운전비용을 절감할 수 있는 것으로 나타났으며, 이와 같은 방법은 기존 시스템의 최적운영은 물론 생애주기 비용 최소화 측면에서 신규 용수공급 체계의 설계 등에 적절히 활용될 수 있다.

• 한국건설관리학회논문집
• /
• 제17권1호
• /
• pp.92-100
• /
• 2016

다양한 분야에서 방대한 데이터를 효율적으로 정확하게 처리하고 데이터 처리 오류 및 처리속도를 최소화하기 위한 시스템을 적용하기 위하여 연구와 노력이 진행되고 있다. 이에 이 논문에서는 생애주기 전반에 걸쳐 방대한 데이터가 생성되는 LNG 플랜트 프로젝트 중 공사원가의 65~70% 이상을 차지하는 구매조달 단계의 Logistics 업무를 대상으로 업무 간 생성되는 데이터에 메타데이터를 적용함으로써 정보 검색 시 데이터 처리 오류 및 처리속도를 최소화할 수 있는 메타데이터 시스템을 적용하였다. 이러한 메타데이터 시스템을 통하여 정보 검색 시 시스템 사용자가 필요한 정보에 보다 정확하고 빠르게 접근할 수 있다

• 한국건설관리학회논문집
• /
• 제5권4호
• /
• pp.122-129
• /
• 2004

현재 대부분의 리모델링 현장은 시설에 대한 사전정보부족, 공간적인 제약과 같은 예상치 못한 현장조건. 작업범위의 변경 등으로 인해 촉박한 공사기간으로 추진되고 있으며, 이는 조악한 품질의 원인이 되고 있다. 또한 다소 복잡한 작업체계를 가지고 있어 기존시설의 운영일정과 공사일정과의 충돌로 인한 갑작스런 작업대기시간의 발생 등 효율적인 공정관리에도 많은 어려움이 뒤따른다. 따라서 본 연구에서는 실제 리모델링 사례를 통하여 현장관리 절차 및 사례현장에서 나타난 시공관리상 문제점의 개선과정을 통해 리모델링 공사현장의 효율적 관리방안을 제시하는 것을 목적으로 하였다. 관리방안의 수립을 위해 문헌을 통하여 관리상의 문제점을 도출하였고, 사례분석을 통해 공사단계별 현장관리절차, 관리사항을 파악하여 관리상 성공요인을 도출하고, 향후 리모델링 현장에서의 효율적 관리방안을 제시하였다.

• 기술발표회
• /
• 통권2006호
• /
• pp.279-291
• /
• 2006

This study shows decision-making process for selection of cutoff wall on a wastewater treatment project. There are 10 different cut-off wall methods So, we examine the site to gather information for find appropriate methods. After using that information, 10 cutoff wall methods are reviewed for analysis. Through brainstorming, four alternatives are selected for design VE item. Following the standard VE process, we established performance criteria and evaluated function score(F) using questionnaire. The questionnaires, brainstorming and AHP method for weighting on performance criteria and evaluate function score increased the reliability of this selection process. Water Jet method, one of four methods, has the best function score(F=92.71) and the lease construction cost(as cost index 1,000). The value score also highest as 92.7, so we select the method. The result is value innovation type In addition, the authors try to calculate the environmental burden in selection process using LCA. We cannot conduct the full LCA as defined ISO, so perform Simple LCA In LCA result, the cut-off grouting has the least environmental burden as index 9.09E+01 and Water Jet method has following as the second. To selection best method to specific area and purpose, design VE/LCG process used as useful tool and it is needed to develop integrated method that evaluate VEILCC and LCA as one-set process.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.11-19
• /
• 2013

In modern systems design and development, one of the key issues is considered to be related with how to reflect faithfully the stakeholder requirements including customer requirements therein, thereby successfully implementing the system functions derived from the requirements. On the other hand, the issue of safety management is also becoming greatly important these days, particularly in the operational phase of the systems under development. An approach to safety management can be based on the use of the failure mode effect and analysis (FMEA), which has been a core method adopted in automotive industry to reduce the potential failure. The fact that a successful development of cars needs to consider both the complexity and failure throughout the whole life cycle calls for the necessity of applying the systems engineering (SE) process. To meet such a need, in this paper a method of FMEA is developed based on the SE concept. To do so, a process model is derived first in order to identify the required activities that must be satisfied in automotive design while reducing the possibility of failure. Specifically, the stakeholder requirements were analyzed first to derive a set of functions, which subsequentially leads to the task of identifying necessary HW/SW components. Then the derived functions were allocated to appropriate HW/SW components. During this design process, the traceability between the functions and HW/SW components were generated. The traceability can play a key role when FMEA is performed to predict the potential failure that can be described with the routes from the components through the linked functions. As a case study, the developed process model has been applied in a project carried out in practice. The results turned out to demonstrate the usefulness of the approach.

• STI Policy Review
• /
• 제8권1호
• /
• pp.41-61
• /
• 2017

The literature in research policy extensively addresses the interaction between public R&D and the society. Scholars have paid particular attention to the way science and technology are diffused into the society and industry with the aim of substantiating their potential value. In practice, having recognized the importance of the said interaction, R&D entities and governmental organizations promote scientific and technological innovations that result from their R&D activities. Yet, the nature of news media exposure as their primary channel to promote R&D outcomes has been remarkably understudied. Using the results of R&D projects supported by the National Research Foundation of Korea (NRF), this study examines R&D entities' strategic use of the news media to publicize their outcomes. The empirical results suggest that the scale of an R&D project positively affects the counts of media exposure of its R&D outcomes, whereas the level of technology readiness and the technology life-cycle do not have significant influence. In addition, the results suggest that, compared to senior researchers, young researchers are more likely to publicize their R&D outcomes and that R&D outcomes from highly ranked universities are more likely to be publicized than those from lower-ranking universities despite our control for R&D outcomes. The aforementioned results suggest that in promoting the diffusion of science and technology, especially to the public, policymakers should be concerned about incentives for those who provide techno-scientific information, such as researchers. The social need for the diffusion of techno-scientific information into the public (e.g., technology transfer and diffusion) is an insignificant factor in determining the media exposure of such information, whereas personal benefits and sensitive issues related to a researcher's own R&D activities (e.g., justification for R&D activities) drive researchers to publicize their R&D outcomes. This paper suggests that policymakers, especially those concerned with better diffusion of scientific and technological innovations need to design a proper incentive system to maximize the societal benefits of media exposure.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.143-148
• /
• 2008

본 연구는 BTL 사업 중 학교시설에 대한 VE LCC를 적용한 결과에 대한 효과를 분석한 것이다. BTL 사업은 민간사업자가 자금을 투자하여 공공시설을 건설 한 후 시설의 소유권을 정부에 이전하는 대신 일정기간동안 시설의 사용 수익권한을 획득하여 그 권한을 정부에 임대하고 그 임대료로 투자비를 회수하는 사업방식이다. 정부는 건설기술관리법 시행령 제 38조의 13 '설계의 경제성 등 검토'를 제정하여 100억 이상의 건설공사에 경제성 검토를 실시하도록 법적으로 제도화하였다. 학교시설 BTL 사업은 2006년부터 시작되었지만, 학교시설 BTL 사업의 특성상 사업실적이 적고, VE 워크샵 수행기간도 짧고, VE 적용 후 데이터베이스 구축이 타 사업에 비하여 적은 실정이다. 따라서 본 연구에서는 최근 학교시설 BTL 사업 설계 VE 사례분석을 통하여 VE LCC의 효과를 분석하고, VE 데이터베이스로 활용하고자 한다.

• 한국주거학회논문집
• /
• 제18권6호
• /
• pp.45-55
• /
• 2007

The study is based on a two-year research study titled 'A study on the Development of the Programs for Housing Policy to support Multi-family Housing Remodeling in Korea'. The primary purpose of this two-year study was to recommend governmental program initiatives for supporting multi-family housing remodeling activities in Korea. As a part of this research study, this article was written based on the results from the two surveys regarding multi-family housing remodeling in the United States and Korea, and a focus group with housing researchers affiliated to the Joint Center for Housing Studies. Major research findings are presented as follows: First, there have been various types of supportive programs for single- and multi-family housing remodeling in the United States. Those have focused on lower income families than middle income families. Compared with the programs in the United States, the apartment remodeling in Korea has been focusing on small population of the multi-family housing owners. Apartment remodeling in Korea needs supportive programs for rental housing remodeling and the housing remodeling for low-incomes. Second, there have been various types of remodeling activities made in multi-family housing properties in the United States. Size of remodeling project also varied. Their remodeling activities were based on the long-term repairing plans initiated by professional apartment management groups. For making our multi-family housing properties more sustainable, we also need to have the long-term repairing plans. Third, the apartment property remodeling has been regarded as a substitute of reconstruction of apartment properties. However, remodeling should be regarded as one of the most efficient ways to extend the life-cycle of apartment buildings. Thus, benefits and executive plans of apartment remodeling should be studied by a professional research center under our governmental responsibilities as done in the United States.