• 전기학회논문지
• /
• 제67권3호
• /
• pp.343-351
• /
• 2018

Renewable energy sources has drawn considerable attention as clean energy sources because of changing public attitudes regarding greenhouse gas and fine dust. Recently, in this respect, the government provides the drivers of electric vehicles with various benefits such as tax reduction, financial incentives and free parking from the public to the private sector. Plug-in electric vehicles are the most common in the private sector. Otherwise, different types of battery-based buses in the public sector are being developed, and there are three main types of charging: plug-in, battery swapping and wireless. Therefore, economic assessment of charging types in each bus route is required in order to facilitate the use of battery-based buses instead of the existing CNG buses. In this paper, net present value(NPV) and B/C ratio of charging types are evaluated in consideration of the bus schedule, the cost of charging station, and the life cycle of battery, etc. per each bus route. In case study, main bus routes in Daegu City are simulated with the proposed evaluation method to validate the eco-bus project.

• KIEAE Journal
• /
• 제11권4호
• /
• pp.63-70
• /
• 2011

In respond to the global energy crisis and climate change, there have been many ongoing national efforts to develop a sustainable housing prototype followed by "2 million Green Home Project" in Korea. More than 50% of nation's population are currently living in apartment housing thus the country is seriously in need of developing green apartment prototype. In this research, we focused on energy-conservative green apartment design prototype that have both passive components and active systems explored in a systemic design approach. After selecting an existing basic apartment unit, we analyzed and compared statistical data with the simulated annual energy consumption to match these two data sets for validating simulation accuracy performed with TRNSYS package. We performed energy simulations with different passive design factors such as varied insulation thickness, window types and infiltration rates as well as the active design factors including boilers and lighting fixtures to analyze their impacts on the energy performance of the housing unit using TRNSYS software. As a result, we acquired significant energy reduction effect with explored design strategies but the life cycle cost analysis for the final design guidline would need to be performed. In this study, we focused on a systematic comparative energy analysis based on TRNSYS that can improve the design of a green apartment housing.

• Journal of Information Technology Applications and Management
• /
• 제27권1호
• /
• pp.97-109
• /
• 2020

It is expected that the Fourth Industrial Revolution will have a great impact on the manufacturing industry, especially as it will cause big changes in industry, economy as well as socio-cultural. To cope with this situation, each country is promoting the policy of cultivating its manufacturing. This study derives the effect of the fourth industrial revolution on product lifecycle management for smart manufacturing through expert's cognitive analysis. The knowledge area of product lifecycle management is divided into Project Portfolio Management, Collaborative Product Design, Customer Needs Management, Direct Material Sourcing, Product Data Management, Digital Manufacturing & Engineering, R&D Foundation, New Product Development through academic research. The expert survey was conducted in five different perspectives: Importance, Insufficiency. Then, using the results of the survey and the academic research the implication about Product Lifecycle Management were derived. The significance of this study is that it derives the change areas and factors of the product life cycle management knowledge domain in preparation for the fourth industrial revolution according to the perspective of importance and insufficiency.

• 한국BIM학회 논문집
• /
• 제1권2호
• /
• pp.12-18
• /
• 2011

건설 프로젝트 생애주기 전반에 걸쳐 생성되는 정보를 3차원 모델을 기반으로 관리하는 BIM (Building Information Modeling) 기술은 계획, 설계, 구조해석은 물론 견적 및 3차원 시뮬레이션을 통한 시공계획 등 공사관리 업무를 통합하는 방향으로 발전하고 있다. BIM 기반 견적모델은 3차원 모델의 사용 용도에 따라 상세수준의 차이와 모델정보의 차이를 보이는데, 본 연구에서는 교량 구조물을 대상으로 하여 견적을 위한 모델의 LOD 수준을 파악하였다. 또한 건설정보 분류체계에 적용되는 라이브러리의 클래스를 정의하고 Microstation의 API를 이용하여 클래스의 파라메터를 추출하여 파라메터와 연동되는 Resource의 물량정보를 산출한다. 견적 모델과 상이하게 모델링된 모델에서 하위 모델을 계층화 하고 견적수준으로 병합함으로써 BIM 기반 토목 라이브러리를 통한 견적자동화시스템을 검증하였다.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.59-70
• /
• 2020

Three-dimensional (3D) design data is used for various purposes throughout the life cycle of a plant construction project. Plant 3D CAD systems support 3D modeling based on specs-catalogs, which contain data that are used for different purposes such as design, procurement, production, and handover. Therefore, it is important to share the spec-catalog data in the 3D design model with other application systems. Sharing this data thus requires a system that extracts spec-catalog data from plant 3D CAD systems and converts them into neutral model data. In this paper, we analyze equipment spec-catalog data of plant 3D CAD systems and, based on these analyses, define the data structure for neutral spec-catalog data. We subsequently propose a procedure that translates native spec-catalog data to neutral model data and develop a prototype system that performs this operation. The proposed method is then experimentally validated for the test spec-catalog data.

• 대한간호학회지
• /
• 제23권1호
• /
• pp.42-55
• /
• 1993

Computerization has been applied in most areas of health care in recent years. But computerized standardized nursing care plans have not yet been adequately developed even though they can significantly contribute to an improvement in the quality of nursing care. Therefore, this study was done to develop computerized nursing care plans. For this purpose, the study had the following objectives ; 1) to develop a computerized program for standardized nursing care plans which include defining characteristics, relating factors, expected out-comes and nursing interventions 2) to test applicability of the computerized pro-grams to the actual clinical situation of the clinical nurse. Application of the system development life cycle by davis was used as the study methodology. There are five stages in this method : strategy planning development, system analysis, system design, system practice and system evaluation. The first four steps in this methodology were used in this project. Two clinical nurses were selected to apply this computerized program in the clinical situation. The results of the study are as follows ; 1) Ten standardized nursing care plans including defining characteristics, relating factors, expected outcomes and nursing interventions which had been proven to have validity in the clinical setting were computerized using the Foxbase Program. 2) These programs were applied to the actual clinical situation by two clinic친 nurses working at Severance Hospital. For further study, continuous revision should be done by the users. Evaluation related to the utilization of the program should also be done.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.82-87
• /
• 2003

국내 리모델링 시장은 초창기로서 비주택 부문을 중심으로 성장하고 있으며, 일반건축물의 리모델링 사업을 수행하는데 무리가 없으나 공동주택 리모델링 사업을 추진해 가는데는 재건축의 수익성에 익숙한 주민의식, 업계의 사업수행 경험 및 노하우 부족, 정책실행의지 및 구체적 실행방안 부족 등이 어려움이 되고 있다. 리모델링 사업환경을 개선하기 위해서는 리모델링 수요자측의 인식전환, 정부의 강력한 경제적 인센티브 제도 제공, 신축위주의 파라다임에서 건물의 라이프사이클을 괴려한 건설경영 파라다임으로의 전환, 기존건물의 상황을 충분히 활용하는 공사방안 도출 및 활용, 리모델링 관련 산업 인프라 구축이 필요하다.

• 산업공학
• /
• 제17권spc호
• /
• pp.122-130
• /
• 2004

Since the cost of software maintenance occupies about 50~75% in a general successful organization, the software maintenance plays an important role in software life cycle. In particular, if the managed system needs to be operated in a long term or the system is very large and complex, then the maintenance is especially more important. Software maintenance is defined as software modification activities after customer delivery, such as improvement of performance or functionality, error correction, adaptation to environmental changes, etc. In this paper, software cost estimation models are proposed, that is based on productivity of manpower in maintenance projects. In order to do this, the activities of maintenance are classified into function change, non-function change, user support and application operation. The proposed models are constructed and verified based on the real size and cost information of projects in the real world. The approach in this paper is to discriminate the heterogeneous activities in maintenance projects, and then to calculate the respective cost of each discriminated activity. By using the proposed models, the total cost of maintenance project is summed from the costs of four activities. In addition the number of conflicts between owner and order receiver about the amount of cost will be reduced and the reasonable cost estimation system will be established.

• 한국환경농학회지
• /
• 제35권2호
• /
• pp.148-151
• /
• 2016

BACKGROUND: There are few studies on the impacts of hydrophytes on water quality, so there is a need to research the effects of death of hydrophytes on the worsening of water quality. This study aimed to monitor the effects of Trapa japonica death on reservoir water quality.METHODS AND RESULTS: T.japonica shows the life cycle that highest growth in summer and rapid death in fall decomposing their body in general. T.japonica contains comparatively large portion of nutrients and minerals. Through the field survey using Mesocosm to identify the effects of excessive population of T.japonica on water quality, the water quality of plots planted T.japonica is gradually worse compared with the control plot. And the result of Wilcoxon-test also shows that the negative effect of T.japonica on water quality with significant (p<0.05).CONCLUSION: It is necessary to control the population growth of T.japonica in order to prevention of water pollution in fall.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.32.1-32.1
• /
• 2008

It is well known that solar and space weather activities can influence the performance and reliability of modern technological system and can endanger human life. Since 2007, the Korea Astronomy and Space Science Institute (KASI) has initiated a research project for the construction of Korean Space Weather Prediction Center (K-SWPC) to make preparations for the next solar cycle maximum (~2012). In this talk, we briefly introduce the current progress of KASI activities for K-SWPC; extension of ground observation system, construction of space weather database and network, development of prediction models, and space weather effects. In addition, future plans for KSWPC will be discussed.