• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.65-71
• /
• 2005

At present, Electronic industries push ahead to eliminate the Pb(Lead) -a hazardous material-from all products. Especially, we have performed to select the optimum standard composition of lead free alloy for the application to products for about 3 years from 2000. These days, we have the chance for applying to the mass-production. This project constructed the system for applying the lead free solders on consumer electronic products, which is one of the major products of the LG Electronics. To select the lead free solders with corresponding to the product features, we have passed through the test and applied with Sn-3.0Ag-0.5Cu alloy system to our products, and for the application to the high melting temperature composition, we secured the thermal resistance of the many parts and substrate and optimized the processing conditions. We have operated the temperature cycling test and the high temperature storage test under the standards to confirm the reliability of the products. On these samples, we considered the consequence of our decision by the operating test. For the long life time of the product, we have operated the temperature cycling test at $-45^{\circ}C\;-\;+125^{\circ}C$, 1 cycle/hour, 1000 cycles. Also we have tested the tin whisker growth about lead free plating on lead finish. We have analyzed with the SEM, EDS and any other equipment for confirming the failure mode at the joint and the tin whisker growth on lead free finish.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.51-55
• /
• 2007

As for satellite programs, the multipurpose satellite 1(KOMPSAT-1) was successfully launched on Dec. 21, 1999 and operated for three years. It is still properly operated even though its life cycle was ended. The development of KOMPSAT-2 (Korea Multipurpose Satellite-2) is near completion and the development of KOMPSAT-3, KOMPSAT-5 and COMS (Communication, Ocean, Meterological Satellite) are proceeding swiftly. In KORDI(Korea Ocean Research and Development Institute), the KOSC (Korea Ocean Satellite Center) construction project is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI(Geostationary Ocean Color Imager) instrument which is loaded on COMS(Communication, Ocean and Meteorological Satellite); it will be launched in 2000. Ansan(the headquarter of KORDD has been selected for the location of KOSC between 5 proposed sites, because it has the best condition to receive radio wave. The data acquisition system is classified antenna and RF. Antenna is designed to be ${\emptyset}$ 9m cassegrain antenna which has 19.35 $G/T(dB/^{\circ}K)$ at 1.67GHz, RF module, is divided into LNA(Low noise amplifier) and down converter, those are designed to send only horizontal polarization to modem The existing building is re-designed and classified for the KOSC operation concept; computing room, board of electricity, data processing room, operation room Hardware and network facilities have been designed to adapt for efficiency of each functions. The distribution system which is one of the most important systems will be constructed mainly on the internet, and it is also being considered constructing outer data distribution system as a web hosting service for to offering received data to user under an hour.

• Journal of Korea Water Resources Association
• /
• v.42 no.9
• /
• pp.759-771
• /
• 2009

The electricity cost of pumping system accounts for a large part of the total operating cost for long distance water supply networks. This study presents a method based on dynamic programming for establishing an joint optimal operation of pumps and storages system on a hourly basis. Analysis is taken of the relative efficiencies of the available pumps, the structure of the electricity tariff, the consumer-demand pattern, and the storage characteristics and operational constraints of the pipe. The possible system objectives and constraints are described. An application of the method to the existing Yangju Water Supply System consisted of two pump station and 5 storage pools under the condition of expanding pumping facility in the part of the Capital Area Water Supply System is presented, showing that considerable electricity cost savings are remarkable. The approach was found to be implementable in real system operation and large-scale water supply system design in respect of minimizing life-cycle total cost.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.92-100
• /
• 2016

Many research efforts have made on various fields to develop a system which is able to process diverse data in terms of efficiency and accuracy as well as minimizing the error in data-processing. As known, it is obvious that procurement is crucial process for the plant projects due to its importance and impact on the performance. It is strongly required to develop an effective metadata system to assist optimal controlling data for the logistics discipline of procurement processes in plant projects. Therefore, the main purpose of this paper is to apply a metadata system for logistics of the plant projects. The suggested technical module is tested using sample data and evaluated its performance in terms of accuracy and running speed. The results of this research will be extended to the other processes of plant projects in order to achieve a ultimately process-based life-cycle plant project information management system

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.4 s.20
• /
• pp.122-129
• /
• 2004

The purpose of this study is to propose a way that improves the construction management for remodeling of building. The study attempts to deal with the case study for application and suggests some positive and negative lessons. The main contents and results of the study are as follows. (1) Through the repetitive joint meetings among the various participants, decision making for the remodeling process can be speeded up. (2) Clear work order and communication for work scope can be accomplished by using perspective drawing in design phase. (3) Reliable construction planning and scheduling for remodeling of building can be proposed through case study. (4) By a sound survey, conflict elements can be resolved in advance. Also reasonable procurement plan of equipments and multi-skilled labor can be important factors to keep a construction schedule in time. (5) Through the comparison a case project with other sites having a similar work scope, improvement effect in a time and cost aspect was analyzed quantitatively. The study also recommends that, as a future research, the remodeling process model be developed for more general applications in remodeling of building.

• 기술발표회
• /
• s.2006
• /
• pp.279-291
• /
• 2006

This study shows decision-making process for selection of cutoff wall on a wastewater treatment project. There are 10 different cut-off wall methods So, we examine the site to gather information for find appropriate methods. After using that information, 10 cutoff wall methods are reviewed for analysis. Through brainstorming, four alternatives are selected for design VE item. Following the standard VE process, we established performance criteria and evaluated function score(F) using questionnaire. The questionnaires, brainstorming and AHP method for weighting on performance criteria and evaluate function score increased the reliability of this selection process. Water Jet method, one of four methods, has the best function score(F=92.71) and the lease construction cost(as cost index 1,000). The value score also highest as 92.7, so we select the method. The result is value innovation type In addition, the authors try to calculate the environmental burden in selection process using LCA. We cannot conduct the full LCA as defined ISO, so perform Simple LCA In LCA result, the cut-off grouting has the least environmental burden as index 9.09E+01 and Water Jet method has following as the second. To selection best method to specific area and purpose, design VE/LCG process used as useful tool and it is needed to develop integrated method that evaluate VEILCC and LCA as one-set process.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.11-19
• /
• 2013

In modern systems design and development, one of the key issues is considered to be related with how to reflect faithfully the stakeholder requirements including customer requirements therein, thereby successfully implementing the system functions derived from the requirements. On the other hand, the issue of safety management is also becoming greatly important these days, particularly in the operational phase of the systems under development. An approach to safety management can be based on the use of the failure mode effect and analysis (FMEA), which has been a core method adopted in automotive industry to reduce the potential failure. The fact that a successful development of cars needs to consider both the complexity and failure throughout the whole life cycle calls for the necessity of applying the systems engineering (SE) process. To meet such a need, in this paper a method of FMEA is developed based on the SE concept. To do so, a process model is derived first in order to identify the required activities that must be satisfied in automotive design while reducing the possibility of failure. Specifically, the stakeholder requirements were analyzed first to derive a set of functions, which subsequentially leads to the task of identifying necessary HW/SW components. Then the derived functions were allocated to appropriate HW/SW components. During this design process, the traceability between the functions and HW/SW components were generated. The traceability can play a key role when FMEA is performed to predict the potential failure that can be described with the routes from the components through the linked functions. As a case study, the developed process model has been applied in a project carried out in practice. The results turned out to demonstrate the usefulness of the approach.

• STI Policy Review
• /
• v.8 no.1
• /
• pp.41-61
• /
• 2017

The literature in research policy extensively addresses the interaction between public R&D and the society. Scholars have paid particular attention to the way science and technology are diffused into the society and industry with the aim of substantiating their potential value. In practice, having recognized the importance of the said interaction, R&D entities and governmental organizations promote scientific and technological innovations that result from their R&D activities. Yet, the nature of news media exposure as their primary channel to promote R&D outcomes has been remarkably understudied. Using the results of R&D projects supported by the National Research Foundation of Korea (NRF), this study examines R&D entities' strategic use of the news media to publicize their outcomes. The empirical results suggest that the scale of an R&D project positively affects the counts of media exposure of its R&D outcomes, whereas the level of technology readiness and the technology life-cycle do not have significant influence. In addition, the results suggest that, compared to senior researchers, young researchers are more likely to publicize their R&D outcomes and that R&D outcomes from highly ranked universities are more likely to be publicized than those from lower-ranking universities despite our control for R&D outcomes. The aforementioned results suggest that in promoting the diffusion of science and technology, especially to the public, policymakers should be concerned about incentives for those who provide techno-scientific information, such as researchers. The social need for the diffusion of techno-scientific information into the public (e.g., technology transfer and diffusion) is an insignificant factor in determining the media exposure of such information, whereas personal benefits and sensitive issues related to a researcher's own R&D activities (e.g., justification for R&D activities) drive researchers to publicize their R&D outcomes. This paper suggests that policymakers, especially those concerned with better diffusion of scientific and technological innovations need to design a proper incentive system to maximize the societal benefits of media exposure.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.143-148
• /
• 2008

This study is VE LCC case analysis on two school BTL projects which is constructed by Private sector and rented to government. Then private sector payback their initial cost and profit by rental fee from government. The VE in Korea, revised by the method of the Construction Technique - Enforcement Ordinance in 2005 is applicable to construction business which size is over 10 billion won. The VE well known as a way of productivity elevation is already proven and outstanding management method In construction industry inside and outside of the courtly. As its unique personality of BTL business, VE workshop period is too short. There is a few accomplished BTL project and data base, because BTL business begun from year of 2006. So we are trying to proof effect of VE LCC through case study of school BTL projects.

• Journal of the Korean housing association
• /
• v.18 no.6
• /
• pp.45-55
• /
• 2007

The study is based on a two-year research study titled 'A study on the Development of the Programs for Housing Policy to support Multi-family Housing Remodeling in Korea'. The primary purpose of this two-year study was to recommend governmental program initiatives for supporting multi-family housing remodeling activities in Korea. As a part of this research study, this article was written based on the results from the two surveys regarding multi-family housing remodeling in the United States and Korea, and a focus group with housing researchers affiliated to the Joint Center for Housing Studies. Major research findings are presented as follows: First, there have been various types of supportive programs for single- and multi-family housing remodeling in the United States. Those have focused on lower income families than middle income families. Compared with the programs in the United States, the apartment remodeling in Korea has been focusing on small population of the multi-family housing owners. Apartment remodeling in Korea needs supportive programs for rental housing remodeling and the housing remodeling for low-incomes. Second, there have been various types of remodeling activities made in multi-family housing properties in the United States. Size of remodeling project also varied. Their remodeling activities were based on the long-term repairing plans initiated by professional apartment management groups. For making our multi-family housing properties more sustainable, we also need to have the long-term repairing plans. Third, the apartment property remodeling has been regarded as a substitute of reconstruction of apartment properties. However, remodeling should be regarded as one of the most efficient ways to extend the life-cycle of apartment buildings. Thus, benefits and executive plans of apartment remodeling should be studied by a professional research center under our governmental responsibilities as done in the United States.