• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.1
• /
• pp.40-45
• /
• 2014

This study examines the system and process of battery stored energy in vehicles and suggest the effective area for the use of V2G(vehicle-to-grid) from Jeju Smart Grid Demonstration Project. V2G means technology of electric power transmission from the battery of electric-drive vehicles to state grid. As for the increasing of effectiveness for demand-side control, V2G is a very good alternative. In the U.S., the utilization of electric vehicles is under 40% on average. In this case, we can use he battery of electric vehicle as role of frequency regulation or generator of demand-side resource. V2G, which is the element of Smart Transportation, consists of electric vehicle battery, BMS(battery management system), OBC(on-board charger), charging infrastructure, NOC(network operating center) and TOC(total operation center). V2G application has been tested for frequency regulation to secure the economical efficiency in the United States. In this case, the battery cycle life is not verified its disadvantage. On the other hand, Demand Response is required by low c-rate of battery in electric vehicle and It can be small impact on the battery cycle life. This paper concludes business area of demand response is more useful than frequency regulation in V2G application of electric vehicles in Korea. This provides the opportunity to create a new business for power grid administrator with VPP(virtual power plant).

• Journal of Internet Computing and Services
• /
• v.10 no.4
• /
• pp.115-126
• /
• 2009

A software size estimation has to be analyzed in the beginning of the software life-cycle and helpful to the prediction of its size and cost. The software cost has been calculated by estimating software size from the user's point of view since the function point method based on international standards was introduced for the estimation of software size in 2004. However, the current function point method is not easy to be exploited for unfamiliar user, and has a problem that it cannot estimate the proper size for software such as engineering software, scientific calculations and simulation with complicated internal computational logic. This paper presents an improved model which can simplify the existing function point measurement procedure, and perform the estimation of software size in easy and fast way at the initial stage of project. Moreover, it presents a mathematical weighted value calculation model which can solve the problem of the fixed complexity weighted value and reflect the characteristics of organization as its data is pilled up. Our evaluation shows that the presented model has advantage that it can measure the size more rapidly than the existing FPA methods and has more correlation with LOC.

• Journal of KIBIM
• /
• v.1 no.1
• /
• pp.6-12
• /
• 2011

BIM(Building Information Modeling) technologies are the most effective for the maintenance of infrastructures because they provide information sharing througout the life-cycle of structures and support close communication between different project stages. Systematic and well-organized data play a fundamental role for the effective maintenance of subway tunnel. In this paper, 3D information models for maintenance of BIM-based subway tunnel structures are developed. Standard classifications for the maintenance and construction information classification system were adopted. A classification system based on construction information classification system was built considering procedures of maintenance work. It provides optimization and standardization of the work flow for the maintenance of subway structures by applying information modeling processes instead of the current maintenance practices. It can effectively reduces the life cycle cost and time for the maintenance. The proposed system can be utilized for the maintenance history management to enhance current maintenance system.

• Journal of Korean Society of Archives and Records Management
• /
• v.16 no.1
• /
• pp.89-120
• /
• 2016

This study aims to understand the concept and changes of the records management of InterPARES based on the analysis of background, main research interests, and major achievements of IP3 and ITrust. To this end, this study conducted a content analysis of IP3 and ITrust to drive main keywords. This study also utilized word clouds from IP project titles. In addition, a comparative analysis of IP3 and ITrust was conducted based on the environment, scope, core research areas, keywords, objectives, and record management life cycle perspectives. The research identified that InterPARES research was widely expanding the content and subject areas of the study: 1) to apply across the life cycle, as well as long-term preservation; 2) to focus on the concept of trust as well as the concept of authenticity; and 3) to include the concept of the Internet, digital forensics, and the open government along with electronic records.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.99-108
• /
• 2021

With increasing interest in living in hanoks, there's a growing need for more quantitative data on the thermal comfort performance of modern hanoks. With that in mind, this research project studied a modern hanok located in Jamjeong-Haetsal Village in Hwasun, Jeollanam Province as a case study to evaluate the Predicted Mean Vote (PMV) of modernized hanoks. Based on environmental data collected at the hanok and computer simulation both Life-Cycle PMV (L.C.PMV) and Normal PMV (N.PMV) were calculated for the hanok. Study results showed that during the summer and winter seasons the PMV and heat index at major heat and major cold weather points significantly deviated from the comfort zone. The rate of change in PMV was also greater in the winter than in the summer. The study found that the modern hanok lacks proper thermal insulation for maintaining thermal comfort.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.386-389
• /
• 2013

Under climate change and urbanization, rainwater harvesting (RWH) systems are emerging as an alternative source of water supply because of growing concern about water sustainability. RWH systems can satisfy the various watering needs and provide the environmental benefits of lessening the damages from flood, drought, and runoff. The economic success of a RWH system is vitally concerned with the determination of the design capacity of storage tank to be built in the system. The design capacity is determined by the factors of average annual rainfall, period of water scarcity, and water price during the whole life-cycles. Despite the high uncertainties inherent in these factors, the current engineering design of RWH system construction often assumes that storage tanks should be built all at once. This assumption implicitly ignores the managerial flexibility in responds to the future as new information comes out-the right to build storage tanks stage by stage depending on the evolution of demand. This study evaluates the value of a multistage storage tank construction using a real option approach. A case study involving a typical RWH system construction in Jeonju, the Republic of Korea is conducted. The managerial flexibility obtained from the real option perspective allows engineers to develop investment strategies to better cope with the issue of water sustainability.

• Journal of Digital Contents Society
• /
• v.16 no.4
• /
• pp.555-564
• /
• 2015

Since the size of the construction project has become massive, complicated and specialized, the use for a substantial amount of information provided from diverse participants is considered important. Schedule information obtained from a variety of sources is key during the construction project. Misunderstanding of schedule management information causes delay of construction period and low quality of construction. Currently, interest in BIM (Building Information Modeling) that produces the necessary data for the entire life cycle of the building process is rising. The study is to construct the BIM-base-information system in order to systematically manage schedule information of the construction work. For this purpose, the study established a BIM-base-schedule-management-business process and drew a classification system for the work for schedule-information construction. The study also drew information that can be extracted from the BIM model among properties required to build certain information. The schedule is made upon consideration of information needed for schedule management, and information required to schedule a timeline of the construction project by process is established.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.74-81
• /
• 2008

Urban Regeneration has an object to restore a function of urban through physical/cicumstance, social lift/culture, industrial/economic regeneration. It has characteristics like existence of a lot of projects, complextity of stakeholders' structure, long period of project life cycle to achieve variety of project's promotion strategy. To accomplish a Urban regeneration that has above characteristics successfully, information about other projects should be managed organically. And it should provie information linked up with each projects by integrated management. We need a decision making method that helps users cope with requirements of change during project, and offers information when each users need to make a decision timely. So I propose a strategy to build the IETM considering urban regeneration characteristics.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.121-131
• /
• 2006

Since "Act on Private Participation in Infrastructure" were changed in January 2005, BTL(Build-Transfer-Lease) projects of Private Participation In Infrastructure was introduced in the domestic construction market for the purpose of providing public facilities with the public. Selecting the most qualified Promoter should be considered discreetly in BTL projects because BTL projects is for projects with approximately thirty year project life cycle, plan, construction, operating, maintenance and obviously the success of the project totally depends on the capability and role of concessionaire. However, score for cost is likely to influence designating concessionaire to take the project. Accordingly, low bid contract with too much competition could decrease the quality of the construction plan and operating plan. Thus, this study did preliminary research and documents on problems of evaluation criteria for designating concessionaire in BTL projects, and proposed improvement program by doing questionnaire over specialists of each field.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.116-124
• /
• 2021

As the utilization of the BIM model increases in the design and construction stages of a construction project, the utilization of BIM in the maintenance stage can also increase. In the maintenance stage, BIM objects created in the design and construction stages that have already been completed are used. Therefore, it is necessary to verify the reliability of whether the used BIM object is a certified model created in the design stage. In particular, the reliability of the BIM model becomes more important in a project such as railway facilities composed of various construction activities with civil engineering, architecture, electricity, signal, and track work. This study proposes a methodology of using blockchain technology as a way to secure the reliability of the BIM model used in the maintenance phase, and constructs the block structure and detailed process for applying the blockchain technology to BIM. In addition, by applying this process to the BIM model of an actual facility to generate a block, it was confirmed that the blockchain technology can be used as a tool to secure the reliability of the BIM model.