• The Korean Journal of Ecology
• /
• v.24 no.4
• /
• pp.253-258
• /
• 2001

Land use pattern in the Wangsuk river watershed was investigated on the bases of physiognomic vegetation maps made from the aerial photograph interpretation and field check. Landscape structure was analyzed using a GIS program supported by ArcView. Landscape structure depended on the geographical position of the river, such as the upper, middle and lower river. Watersheds of the upper and middle rivers were dominated by forests composed of secondary forest and plantation. But agricultural fields dominated that of the middle and lower river. Urban area and agricultural fields increased in from the upper toward the lower river watersheds. In addition to, a transformation of agricultural pattern into an institutional agriculture was characteristic in the middle and lower river basins. Water qualities of the Wangsuk river were usually better in the order of the upper, middle, and lower river, but they were fluctuated according to the site. Such fluctuation would due to self-purification of the river and land use pattern of the watershed as the non-point source. In this viewpoint, a strategy to manage the water quality in the level of watershed is urgently required.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2365-2368
• /
• 2001

This paper describes a fuzzy steering controller for an autonomous mobile robot with MR sensor. Using the magnetic field($B_{x}$, $B_{y}$, $B_{z}$) obtained from the MR sensor, we designed fuzzy controller for driving on the road center. Fuzzy rule base was built to magnetic field($B_{x}$, $B_{y}$, $B_{z}$). To develop an autonomous mobile robot simulation program, we have done modeling MR sensor, dynamic model of mobile robot and coordinate transformation. A computer simulation of the robot (including mobile robot dynamics and steering) was used to verify the steering performance of the mobile robot controller using the fuzzy logic. Good results were obtained by computer simulation. So, we confirmed the robustness of the proposed fuzzy controller by computer simulation. Also, we know that proposed control algorithm was applied to real autonomous mobile robot.

• Korean Institute of Interior Design Journal
• /
• v.25 no.2
• /
• pp.3-12
• /
• 2016

Aires Mateus Architects is one of the most well-known Portuguese architects after $\acute{A}lvaro$ Siza and Eduardo Souto de Moura. The studio shows clear design methods in which the relationship between solid mass and void space are creatively inter-connected. Subtractive transformation of form is the fundamental aspect of this relationship. Most of Aires Mateus' projects were designed based on the subtractive method. Although subtraction can be seen as architectural formal presentation, in Aires Mateus' cases, there are deeper logics, strategies, and meanings. Not only to create a form, subtractive method has been flexibly used to organize and compose different programs and spatial atmosphere. To examine this hidden dimension of Aires Mateus' unique design process, 5 case projects were selected and analyzed in detail based on program, light & visual-perception, and site's placeness. From the case study results, it is found that there are much deeper role of subtraction: relationship between solid-void are constantly changing to generate serviced and servant spaces, there are central spaces that are contrast against the complexity of exterior forms, aiming to build an archetypal form that transcends ever-changing time, ambivalent balance between universality and peculiarity in the genealogy of contemporary architecture. The study concluded that the unique characteristics of subtraction method as design organization have various possibilities that can apply on other architectural and interior projects which would have similar ideas and circumstances.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.66-73
• /
• 2015

AC-based power systems, having the advantages that voltage transformation and long distance transmission are easy, have been constructed since the last 19th century. However, DC-based power system is paid attention these days because of the development of power electronic devices as well as the increase of digital loads and distributed generation. For instance, the transmission systems using High Voltage DC (HVDC) are commercially operated in the world and the researches on distribution system using Low Voltage DC (LVDC) are gradually increased. This paper analyzes voltage sag, resulted from faults, in LVDC distribution system according to the number of poles. Modeling and simulation with various conditions are conducted by using ElectroMagnetic Transients Program (EMTP). Moreover, some countermeasures to reduce voltage sag in LVDC distribution system are suggested briefly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2739-2744
• /
• 2015

Development of policy incentives and policy direction in the innovation economy is always important. Innovations policy have characterized industrial dynamics, leading to a transformation of the market structure of the specific industry. The paper explores the development of industry convergence for understanding the change of the wireless industry in Daejeon. Although its initial focus is R&D center, The business model has become the research and development of external demand than its own product research and development. For regional innovation, the wireless industry policy should be provided with their own product development pattern.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.309-317
• /
• 2019

This study evaluated the kinetics of acrylamide (AM) biodegradation by mixed culture bacteria and Enterobacter aerogenes (E. aerogenes) in sequencing batch reactor (SBR) systems with AQUASIM and linear regression. The zero-order, first-order, and Monod kinetic models were used to evaluate the kinetic parameters of both autotrophic and heterotrophic nitrifications and both AM and chemical oxygen demand (COD) removals at different AM concentrations of 100, 200, 300, and 400 mg AM/L. The results revealed that both autotrophic and heterotrophic nitrifications and both AM and COD removals followed the Monod kinetics. High AM loadings resulted in the transformation of Monod kinetics to the first-order reaction for AM and COD removals as the results of the compositions of mixed substrates and the inhibition of the free ammonia nitrogen (FAN). The kinetic parameters indicated that E. aerogenes degraded AM and COD at higher rates than mixed culture bacteria. The FAN from the AM biodegradation increased both heterotrophic and autotrophic nitrification rates at the AM concentrations of 100-300 mg AM/L. At higher AM concentrations, the FAN accumulated in the SBR system inhibited the autotrophic nitrification of mixed culture bacteria. The accumulation of intracellular polyphosphate caused the heterotrophic nitrification of E. aerogenes to follow the first-order approximation.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.6
• /
• pp.283-292
• /
• 2021

In this study, a structural health monitoring system for cable-stayed bridges is developed. In the system, condition assessment of the structure is performed based on measured records from seismic accelerometers. Response indices are defined to monitor structural safety and serviceability and derived from the measured acceleration data. The derivation process of the indices is structured to follow the transformation from the raw data to the outcome. The process includes noise filtering, baseline correction, numerical integration, and calculation of relative differences. The system is packed as a condition assessment program, which consists of four major processes of the structural health evaluation: (i) format conversion of the raw data, (ii) noise filtering, (iii) generation of response indices, and (iv) condition evaluation. An example set of limit states is presented to evaluate the structural condition of the test-bed and cable-stayed bridge.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.4
• /
• pp.455-463
• /
• 2021

The purpose of this study is to identify the relationship between firm's green marketing approach and firm's reputation improvement among customers. To investigate the object of the current study and provides adequate material to fill a gap in the literature, the current author collected abundant textual data from numerous extant literature. Because the author needed to augment about reliability and validity, textual data from trusted peer-reviewed sources was obtained from numerous databases. Based on a large body of literature, this study suggests that companies have to declare their stand based on their positioning to safeguard their reputation as an entity and that of its products and services. The five components of a company adopting a recognized environmental marketing strategy include product strategy, demand strategy, pricing strategy, distribution strategy, and labeling strategy Thus, firms' environmental marketing strategies have to be designed with the complete intent of transformation as a solution to enhance their reputation. The current study concludes that the comparison of environmental marketing strategies does not correctly help in ranking the concern in an effective way, and describe the exact details needed in each of the five categories for a company to carry its operations in a sustainable fashion.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.2
• /
• pp.85-96
• /
• 2008

One of the typical methods to prevent tampering and reverse engineering on executable codes is to encrypt them. This paper proposes a code block cipher method based on key chaining to encrypt the code. The block cipher by key chaining has been known to be inadequate for encrypting the code with control transfer, even though the key chaining has advantage of hiding the keys in blocks and making the individual keys different from block to block. This paper proposes a block transformation and duplication method to apply the block cipher by key chaining to the executable codes with control transfer instructions, and shows the idea works with the MIPS instruction set.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.790-798
• /
• 2021

With digital technology innovation, increased data access and mobile network use by consumers, products and services are changing toward pursuing differentiated values for personalization, and personalized markets are rapidly emerging in the fashion industry. This study aims to identify trends in digital customized automation technology by deriving types of digital customizing and analyzing cases by type, and to present directions for the development of digital customizing processes and the use of technology in the future. As a research method, a literature study for a theoretical background, a case study for classification and analysis of types was conducted. The results of the study are as follows. The types of digital customizing can be classified into three types: 'cooperative customization', 'selective composition and combination', 'transparent suggestion', and automation technologies shown in each type include 3D printing, 3D virtual clothing, robot mannequin, human automatic measurement program, AR-based fitting service, big data, and AI-based curation function. With the development of digital automation technology, the fashion industry environment is also changing from existing manufacturing-oriented to consumer-oriented, and the production process is rapidly changing with IT and artificial intelligence-based automation technology. The results of this study hope that digital customized automation technology will meet various needs of personalization and customization and present the future direction of digital fashion technology, where fashion brands will expand based on the spread of digital technology.