• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.3
• /
• pp.357-363
• /
• 1986

In the design of PLA's of VLSI, as the number of subsets of functions from which common preme implicants must be determined increases, the execution time increases by a factor of O(2\ulcorner. When the number of functions N is a large number, this poses a serious problem in minumization of multiple-output logic functions. In this paper a new algorithm that minimizes multiple-output logic functions is proposed. The algorithm requires less number of Fortran statements, less execution time, and less memory area than existing methods. The bases of this algorithm are explained and verified, and the sequential operation for preparation of the program is discussed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.2
• /
• pp.336-349
• /
• 2016

The evaluation of the after-school program depends on whether it achieves its objectives or not so far which makes that it is not easy to figure out which mechanism is attributed to the consequences of the program. This study aims at developing the logic model of the after-school program and follows the processes such as literature review, opinion survey by specialists and in-depth interview with stakeholders. The target program of the study was focused on the special ability aptitude education in the elementary schools. The initial developed theory model was validated and finalized through being reviewed by specialists and teachers in charge of target schools. Based on the framework of logic model, the models are composed of context, components, activities, output/short term outcomes, and long term outcomes. As the key factors of the after-school program, amicable communication between the stakeholders, quality of the program in itself, follow-up management, counseling and guidance for students, instructors' expertise, and quality management of the program were drawn.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.4
• /
• pp.1313-1344
• /
• 2018

This study aims at investigating the effects of Government R&D subsidies. We analyse the effects of inputs and behavioral additionality on the output additionality. We also measure the moderate effects of the experiences of benefiting from government R&D on the relationship between inputs and behavioral additionality and the output additionality. We conducted a structured questionnaire on the companies who have participated in promotion program of the Korea Innovation Cluster. 126 responses were collected and alnalysed using the OLS technique. Empirical results show that the relationship between input/behavioral additionality (management, follow-up, cognitive capacity) and output additionality had positive effect. The moderating effects of experiences of R&D subsidy on the relationship between input additionality and output additionality and the relationship between cognitive additionality and the output additionality appear to be statistically significant.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.4 no.2
• /
• pp.65-73
• /
• 1986

The PM language is a Compiler writing language which syntax- directly translates a high level language into a intermediate language of matrix form. The PM assembler translates the PM language into recursive subroutines which test input strings or output intermediate terms or call another subroutines. A large subset of PASCAL compiler was written in the PM language.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.63-74
• /
• 2001

In this study, a cycle simulation program of a Unit-Injection(UI) system was developed to estimate the injection performance of newly designed injection system. A fundamental theory of the simulation program is based on the conservation law of mass. Loss of fuel mass in the system due to leakage, compressibility effect of the liquid fuel and friction loss in the control volume was considered in the algorithm f the program. For the evaluation of the simulation program developed, the experimental result which was offered by the Technical Research Center of Doowon Precision Industry Co. was incorporated. Two main parameters; the maximum pressure in the plunger chamber and total fuel mass(kg) injected into the engine cylinder per cycle, were measured and compared with the simulation results. It was found that the maximum error rate of the simulation result to the experimental output was less than 3% in the rated rotational speed (rpm) range of the plunger cam.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.6 no.1
• /
• pp.12-18
• /
• 2000

If optimum design technique is applied in the design of packaging container for bulk materials, merits on the side of not only economic and compression performance but distribution efficiency are expected. In this study, on the ground of the optimum models for required board area and compression strength performance, optimum design program having faculties of outward and inward optimum design and information design was developed. This program was composed of input module, output module, database and management module, and calculation module. Though the packaging specifications ars same, requied board area, board composition and cost of container were greatly different according to exterior packaging conditions. Also, about 12% in weight of container was lighter, and about $13{\sim}17%$ in cost of container was reduced when the program was applied for 2 kinds of bulk materials.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.4
• /
• pp.21-28
• /
• 2001

It is a time since sustainable architecture become a main issue of design concept in 21C. However, it is necessary to develope the tool estimating energy loads and uses in our architectural conditions for energy saving design. This study aims to develope the E-Load program to predict heat and cooling loads of houses. The program is developed by modified bin methods derived from ASHRAE TC 4.7. It consists of 4 divisions such as files, data inputs, energy load estimations and output options. The main processes of energy load estimations are based on ASHRAE fundamentals. The developed E-Load program is a easy and valid tool to predict heat and cooling loads of buildings.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.1
• /
• pp.57-65
• /
• 2009

The purpose of Defense Acquisition Project is that the superior weapons validated needs and performance are supplied to military user with limited financial resources and time. The Warship Acquisition Project is not only like this, But also has special characteristics of long project period and first-constructed ship's operation employment. So, The Warship Acquisition Project need systematic and efficient procedure & management. And this paper researches System engineering application of imaginary WIG(Wing-In-Ground Effect) ship acquisition project based Systems Engineering Handbook ver.3.1 published by INCOSE, the lead of field. The Imaginary WIG(Wing-In-Ground Effect) ship acquisition project applied the four processes(technical project, Enterprise & Agreement, Enabling Systems), the basis of INCOSE Engineering Handbook ver.3.1, and the each process output compared with DAPA(Defense Acquisition Program Administration)'s warship acquisition procedure.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.190-195
• /
• 2008

This study aims to develop the thermal performance and economic analysis program of solar heating system applied to district heating systems. The program, named SOLAN-DHS, is consisted of four modules like as user's interface for system input/output, library, and utilities and a calculating engine. SOLAN-DHS simplifies user's input data through the database and can design 5 different types of solar systems. Due to the user-friendly layout, all design parameters can be changed quickly and easily for the influence on system efficiency. The reliability of SOLAN-DHS was finally verified by the experiments.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.94-100
• /
• 1994

By using the RAPHAEL 3D inductance calculation program RI3, the PGA package inductance values of INTEL i486 microprocessor have been extracted. The lead frame layouts are drawn using the mentor Boardstation and the output files are converted into the RI3 program input format of RAPHAEL. The power and ground planes of the PGA package are modeled y grid-line structures of single bars. The capacitance valuse of signal lines have been clalculated by using the RAPHAEL 2D/3D capacitance extraction program. The extraced L, C, R values have been converted into the SPICE netlist formats with lumped circuit model for future use in the signal ingegrity analysis.