• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.104-111
• /
• 2009

In this paper, the gear design program is presented. The profile of gears is created using classical mathematic formulations. In each gear, a kinematic joint is applied and one can define the 20 contact condition between gear pairs. Initial and boundary conditions such as force, torque, velocity, acceleration, etc. can be set. Thus, it is possible to analyze dynamic characteristics of gear pairs such as reaction moment and the variation of angular velocity. In order to find the optimal profile of gear pairs, two optimization methods based on design of experiments are inserted in the program; One is the Taguchi method and the other is the response surface analysis method. To verify the program, the rack & pinion gear is created and analyzed. Simulation results show that the developed program is useful and result data is reliable.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.418-421
• /
• 2008

This paper presents the program to analyze an antenna for using the Moment Method. The program contains three different functional steps. In the first stage, the pre-processor is based on the Delaunay Triangulation Algorithm. The next stage, the main-processor, can be considered the core process of the program, which solutions are obtaining the linear matrix for using the Moment Method. The final stages, the name of the post-processor, analyze radiation patterns, which results are same with the S-parameters. The results demonstrate satisfactory agreement with the results for using other numerical packages and measurement data. We can confirm that the results of this program compare with the results of common program to analyze for an antenna.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.435-440
• /
• 2013

In this paper, a design method of the simulation program for HILS(Hardware-In-the-Loop Simulation) system is proposed. The present method consists of definition of requirements for HILS, development of specifications, and implementation of the program to satisfy the specifications. In the implementation of the program, the application of hardware interface and the concept of structural modularization are proposed to satisfy the specifications. The concepts of CSCI(Computer Software Configuration Item) and encapsulation are used for structural modularization. The proposed method was practically applied to the development of the simulation program for the efficient operation in HILS of an anti-ship missile system.

• Journal of KIISE:Software and Applications
• /
• v.32 no.4
• /
• pp.290-299
• /
• 2005

Stealing the source code of a program is a serious problem not only in a moral sense but also in a legal sense. However, it is not clear whether the code of a program is copied from another or not. There was a program similarity checker detecting code-copy by comparing the syntax trees of programs. However this method has a limitation that it cannot detect the code-copy attacks when the attacker modifies the syntax of the program on purpose. We propose a program similarity check by program control graph, which reveals not only syntax information but also control dependancy. Our method can detect the code-copy attacks that do not change control dependancy Moreover, we define what code-copy means and establish the connection between code-copy and similarity of program control graph: we prove that two programs are related by copy congruence if and only if the program control graphs of these programs are equivalent. We implemented our method on a functional programming language, nML. The experimental results show us that the suggested method can detect code similarity that is not detected by the existing method.

• Journal of Biosystems Engineering
• /
• v.20 no.4
• /
• pp.390-396
• /
• 1995

This study was conducted to develop a computer simulation program for trickle application of nutrient solution. A computer simulation program using finite element method was developed to evaluate discharges of emitters on trickle application. The uniformity of application for two different lateral line lengths and three application methods was evaluated by the computer simulation program. The results of this study are as follows. 1. A computer simulation program was developed to determine emitter discharges from a trickle application system and pressures at emitter positions by finite element method and to design a uniform trickle application system. 2. The simulation program developed was verified by experiment. The root mean square error between experimental data and simulated data was 1.1% on the average discharge and it was found that the computer simulation program was an effective tool for the design of a trickle application system of nutrient solution. 3. The uniformity of trickle application system was evaluated for three different methods of supplying nutrient solution with different lateral line lengths. The best uniformity was obtained from the method, which supplies nutrient solution from both ends alternatively for the same period of time.

• Journal of Engineering Education Research
• /
• v.23 no.3
• /
• pp.59-65
• /
• 2020

This paper introduces the association method for the program outcomes of engineering education accreditation and the competency units of National Competency Standards(NCS). This association method can be used to efficiently develop an engineering curriculum that is based on both of the NCS and the engineering education accreditation. The association method consists of an analysis phase, an association phase and a checking phase. We also deals with the curriculum development procedure that uses the proposed association of program outcomes and competency units. Also, we provide the application of this method to the computer engineering program for NCS-based engineering education accreditation. Thus we can systematically and efficiently develop curriculums for the NCS-based engineering education accreditation by using the proposed method.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.157-165
• /
• 1994

A general-purpose program for automatic two-dimensional finite-element modelling with quadrilateral elements was developed in this research. The conventional looping method employed in the program was introduced with emphasis on a new splitting criterion and a splitting scheme developed for improving the method. Some application examples were given, which show versatility and applicability of the developed program.

• Journal of Internet Computing and Services
• /
• v.3 no.4
• /
• pp.61-69
• /
• 2002

Measurement of the object, messages, clones, capsulation, inheritance, etc. that are conventional object-oriented paradigm characteristics as a method of measurement of the complexity of object-oriented programs has been reported. In this paper, the measures that are helpful to designing and coding of JAVA program, which is the representative language of object-oriented programs, are applied to six measures(i,e., Halstead's Program Volume, Program Level, Program Impurity, Macabe's Cyclomatic Number, Handerson-Seller's lock of cohesion in method and Sullivan's PVG.) suggested in the present study by referring to several actual programs as example for comparative analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.554-558
• /
• 2004

In this paper, we introduce noise prediction program of HVAC system to assist low-noisy design of ship's cabin. The developed program calculates sound power levels at HVAC components considering primary and secondary noise generated by fan and duct element, duct element noise attenuation, and duct break-in noise based on the authentic empirical method suggested by NEBB and acoustic power balancing method. Sound pressure level at cabin with or without ceiling system is evaluated by the diffuse-field theory considering diffuser and duct break-out sound powers. Moreover, the program provides intuitive pre- and post-processors using modem GUI functions to help efficient modeling and evaluation of cabin and HVAC component noise. To validate the accuracy and convenience of the program, noise prediction for a HVAC system is demonstrated.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.606-617
• /
• 2000

A dynamic simulation program for pantograph-catenary system is developed based on a mode superposition method to predict current collection performance. Formulations for the dynamic simulation are presented in this paper. The number of modes which should be considered for a KTX catenary system is reviewed through frequency response analyses. The responses for GPU pantograph - KTX catenary system are simulated with various train speeds. The our simulation results are in reasonably good agreements with RTRI simulation program, SNCF simulation program, and BR simulation program.