Browse > Article

A Study on the Development of the Gear Profile Design Program  

Jung, Sung-Pil (Graduate School of Mechanical Engineering, Ajou Univ.)
Park, Tae-Won (Department of Mechanical Engineering, Ajou Univ.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.26, no.8, 2009 , pp. 104-111 More about this Journal
Abstract
In this paper, the gear design program is presented. The profile of gears is created using classical mathematic formulations. In each gear, a kinematic joint is applied and one can define the 20 contact condition between gear pairs. Initial and boundary conditions such as force, torque, velocity, acceleration, etc. can be set. Thus, it is possible to analyze dynamic characteristics of gear pairs such as reaction moment and the variation of angular velocity. In order to find the optimal profile of gear pairs, two optimization methods based on design of experiments are inserted in the program; One is the Taguchi method and the other is the response surface analysis method. To verify the program, the rack & pinion gear is created and analyzed. Simulation results show that the developed program is useful and result data is reliable.
Keywords
Gear Design Program; Dynamic Analysis; Design of Experiments; Taguchi Method; Response Surface Analysis Method;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Maitra, G. N., "Handbook of Gear Design," McGraw-Hill, pp. 10-17, 1985
2 Amos, G., "MATLAB: An Introduction with Applications," John Wiley & Sons, Inc., pp. 186-221, 2005
3 Merritt, H. E., "Gear Engineering," John Wiley & Sons, Inc., 1971
4 Colbourne, J. R., "The Geometry of Involute Gears," Springer-Verlag, 1987
5 Nikravesh, P. E., "Computer Aided Analysis of Mechanical systems," Prentice-Hall, Inc., pp. 289-311, 1988
6 Lee, K. W. and Cho, K. Z., "A Study on the Automatic Gear Design & Analysis Program," Proc. of KSPE Spring Conference, pp. 226-229, 2000
7 Kwak, J. S. and Chung, S. W., "Development of the Optimal Design Program and the 3-D Modeling for the Helical Gear," Journal of Korean Society of Industrial Application, Vol. 3, No. 2, pp. 107-114, 2000
8 Jeong, H. J., Jung, Y. H. and Yun, J. D., "Developemnt of the Program for Optimum Design of Spur Gear Using Hungting Tooth," Proc. of KSPE Spring Conference, pp. 545-546, 2007
9 Jung, S. P. and Park, T. W., "Analysis and Control of the Flexible Multibody System Using MATLAB," Transactions of KSME(A), Vol. 32, No. 5, pp. 437-443, 2008   과학기술학회마을   DOI   ScienceOn
10 Shabana, A. A. and Sany, J. R., "An Augmented Formulation for Mechanical Systems with Non-Generalized Coordinates: Application to Rigid Body Contact Problems," Nonliner Dynamics, Vol. 24, No. 2, pp. 183-204, 2001   DOI
11 Kuang, J. H. and Yang, Y. T., "An Estimate of Mesh Stiffness And Load Sharing Ratio of a Spur Gear Pair," Proceedings of the 6th International Power Transmission and Gearing Conference, pp. 1-9, 1992
12 Tack, G. R., Chweh, S. H. and Yoon, K. Y., "A Stress Analysis on the Involute-Circular Arc Composite Tooth Profile Gear," Journal of the Korean Sociaty of Mechanical Engineers, Vol. 11, No. 2, pp. 198-204, 1987   과학기술학회마을
13 Baud, S. and Velex, P., "Static and Dynamic Tooth Loading in Spur and Helical Geared Systems-Experiments and Modle Validation," Journal of Mechanical Design, Vol. 124, No. 2, pp. 334-346, 2002   DOI   ScienceOn
14 Cho. G. Y., Kim, S. C., Choi, J. U. and Song, J. C., "A Study on the Developement of Computer-Aided Automatic Design System for Gears," Journal of the Korean Society for Precision Engineering, Vol. 13, No. 5, pp. 95-103, 1996
15 Song, I. H., Choi, J. H., Ryu, H. S. and Bae, D. S., "Dyamic Analysis of Spur Gear Pairs:Mesh Forces with Efficient Contact Analysis," Proc. of Korean Society of Automotive Engineers Spring Conference, pp. 779-783, 2004
16 Cho, S. C., "A Study the Development of Involute Sour Gears Profiles Strength," Journal of Korean Society of Industrial Application, Vol. 9, No. 4, pp. 269-276, 2006
17 Jung, S. P. and Park, T. W., "An Optimum Design of a Gas Circuit Breaker Using Design of Experiments," Mechanics Based Design of Structures and Machines, Vol. 36, No. 4, pp. 346-363, 2008   DOI   ScienceOn
18 American Gear Manufactures Association: AGMA Standard for Rating the Ritting Resistance and Bending Strength of Spur and Helical Involute Gear Teeth, AGMA 218.01, 1982
19 Jung, S. P. and Park, T. W., "Development of the Optimization Design Module of a Brake System," Transactions of Korean Society of Automotive Engineers, Vol. 16, No. 3, pp. 166-171, 2008   과학기술학회마을
20 Haug, E. J., "Computer Aided Kinematics and Dynamics of Mechanical Systems: Vol. I Basic Method," Prentice-Hall, Inc., pp. 1-301, 1988
21 Dudley, D. W., "Handbook of Practical Gear Design," CRC Press, 1984
22 Lee, K. W., Ban J. S., Kim, G. H. and Cho, K. Z., "A Study on Stress Analysis of Spur Gear Using FEM," Journal of the Korean Society for Precision Engineering, Vol. 19, No. 2, pp. 171-176, 2002   과학기술학회마을