• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.226-236
• /
• 2021

The purpose of this study is to analyze the type of latent profile for general high school students' subject selection criteria and to identify the characteristics of the latent class. The survey data of 1072 general high school students (male; 648, female; 424) in G city, Jeollabuk-do and the scale composed of 8 sub-factors: 'SAT orientation', 'academic achievement', 'ability orientation', 'pursuit of interest', 'teacher orientation', 'career development', 'others' recommendation', and 'subject availability' were used for latent profile analysis and cross-analysis between potential layers. As a result of the analysis, high school students' perceptions of subject selection were classified into four latent profiles. The four groups were named 'High Perception Type', 'Low Perception Type', 'Self-Directed Type', and 'Stability-Oriented Type' according to their types. It was found that there was a difference between the latent classes in the importance and performance level of the subject selection criteria. These results can help identify the subject selection tendencies of latent groups in the operation of the 2015 revised curriculum and the 2025 high school credit system that emphasizes the student-centered course selection curriculum and they can also provide customized course selection guidance considering individual differences.

• 지구물리
• /
• 제5권3호
• /
• pp.233-245
• /
• 2002

이 연구에서는 표면파의 분산 특성을 지반 공학에 적용하여 비파괴 시험으로 강성도 프로파일(stiffness profile of shear)를 얻는 방법인 표면파 기법(SASW, spectral analysis of surface waves)의 효율적이고 경제적인 역산을 수행하기 위하여 해석적으로 자코비안을 도출하였다. 표면파 기법은 지하구조를 균질한 수평 층으로 가정하여 레일리 파의 파장 대 위상 속도 관계인 분산 곡선으로부터 레일리 파와 전단파 간의 속도 비례 관계를 이용하여 지하 천부의 전단파 속도 구조를 파악하는 방법이다. 해석적으로 자코비안 식을 유도하여 역산을 수행하므로서 수치적으로 자코비안을 구해 역산을 수행하는 방법에 비해 지하구조를 N개의 수평 층으로 나누었을 때 계산 시간을 2N 배 빠르게 역산을 수행할 수 있었다. 차분 전개를 통한 이론 분산 곡선 응답 반응 알고리즘으로 이론분산 곡선을 구한 후 해석적으로 도출한 자코비안을 이용하여 제한 조건을 가한 감쇠 최소 자승법을 이용하여 이론 모형에 대한 반응 양상을 검토, 고찰하여 타당성을 검증하였다. 물리적 특성을 직접 확인할 수 있었던 현장의 도로 포장체에 대해 적용하므로서 현장 적용 가능성을 확인하였다. 또한 표면파 기법의 응용으로 터널의 숏크리트 두께 및 배면의 전단파 주상도를 얻을 수 있었고 이로부터 터널의 건전성 평가를 내릴 수 있는 가능성을 제시하였다.

• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.13-19
• /
• 2010

A design method of railway wheel profile with objective function of equivalent conicity considering wheel dimension constraint, two points contact problem between wheel and rail was proposed. New design method shows good results. New wheel profile generated from optimization process shows better dynamic performance compared with initial profile as the purpose of wheel profile design. And to verify the design method with testing the stability of new wheel profile, we conducted a critical speed test for new wheel profile using scale model applied scaling method of railway vehicle dynamics. The result of critical speed test show good agreement with that of numerical analysis. From the above results, it is seen that the design method with objective function of equivalent conicity is feasible and it could be applied to design new wheel profile efficiently.

• Korea-Australia Rheology Journal
• /
• 제21권3호
• /
• pp.149-153
• /
• 2009

Profile development of the melt spinning process of poly(ethylene terephthalate) (PET) was simulated by a numerical method under the consideration of two constitutive equations of Newtonian and upper convected Maxwell (UCM) models. The viscoelastic characteristics of the polymer were considered via UCM constitutive equation that considered relaxation time as a function of temperature and molecular weight. The UCM model predicted the diameter profile better than the Newtonian, while velocity development was slower than the Newtonian model. Viscoelasticity played an important role in accurately predicting diameter profile. However, even though neck-like deformation was observed in the UCM model, the exact position of the deformation under high speed spinning was not obtained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.91-92
• /
• 2006

High precision speed reducer which has a cycloid or involute teeth profile, used to in Robot. In this study, suggest to a new teeth profile, which has basically a triangle teeth profile. We had a stress analysis compare to convenient speed reducer for teeth profile. We has a good results in new teeth profile for strength, stress and stiffness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.896-900
• /
• 1996

New approach to determine the optimal design of automotive tire profile was introduced. In this study, optimal design technology was combined with a finite element method. Through tire profile optimization, tire profile was obtained and its profile improved high speed durability and maneuverability Static and dynamic behavior analysis of new concepted tire was compared with conventional tire profile. Optimal design methodology will provide much informations to improve various tire performances.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.384-387
• /
• 2006

Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.150-155
• /
• 2006

Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1051-1058
• /
• 2020

The chemical mechanical planarization (CMP) is a process of physically and chemically polishing the semiconductor substrate. The planarization quality of a substrate can be evaluated by the within wafer non-uniformity (WIWNU). In order to improve WIWNU, it is important to manage the pad profile. In this study, a device capable of non-contact measurement of the pad thickness profile was developed. From the measured pad profile, the profile of the pad surface and the groove was extracted using the envelope function, and the pad thickness profile was derived using the difference between each profile. Thickness profiles of various CMP pads were measured using the developed PMS and envelope function. In the case of IC series pads, regardless of the pad wear amount, the envelopes closely follow the pad surface and grooves, making it easy to calculate the pad thickness profile. In the case of the H80 series pad, the pad thickness profile was easy to derive because the pad with a small wear amount did not reveal deep pores on the pad surface. However, the pad with a large wear amount make errors in the lower envelope profile, because there are pores deeper than the grooves. By removing these deep pores through filtering, the pad flatness could be clearly confirmed. Through the developed PMS and the pad thickness profile calculation method using the envelope function, the pad life, the amount of wear and the pad flatness can be easily derived and used for various pad analysis.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.9-18
• /
• 2008

줄눈 콘크리트포장(JCP-Jointed Concrete Pavement)의 경우 포장단면 온 습도차에 의해 슬래브 내의 컬링이 발생하게 된다. 컬링에 의해서 발생하는 슬래브의 휨 형상 및 크기는 포장내 응력 및 평탄성에 영향을 미치기 때문에 포장의 구조적, 기능적 성능에 중요한 영향을 줄 수 있다. 슬래브의 휨 형상을 직접 측정하는 것은 시공초기에 포장내에 다량의 계측기를 매설하여야 하며, 시공초기부터 거동의 정교한 측정이 필요하고 고가의 실험비용 및 기술적 인 어려움을 갖고 있다. 본 연구에서는 현장에서 손쉽게 획득할 수 있는 프로파일 데이터(Profile Data)에 파워 스펙트럼 분석(Power Spectrum Density Analysis) 및 역 푸리에 변환(Inverse Fast Fourier Transform) 기법 등을 적용하여 임의의 시간에서 줄눈 콘크리트포장의 슬래브 휨 형상을 측정하는 방법을 개발하였다. 개발한 기법의 실효성을 검증하기 위하여 국내 중부내륙에 위치한 시험도로 줄눈 콘크리트 포장에서 시간대별 프로파일을 측정하고 이 데이터로부터 슬래브 휨 형상을 도출하여 그 결과를 검토하였다. 또한 동 시간대의 연속철근 콘크리트포장(CRCP- Continuous Reinforced concrete Pavement) 구간에서의 프로파일 데이터를 분석하고 이를 줄눈 콘크리트포장에서의 결과와 비교하여 개발한 슬래브 휨 형상 추출기법의 타당성을 검증하였다.