• Journal of Animal Science and Technology
• /
• v.59 no.10
• /
• pp.23.1-23.11
• /
• 2017

Background: Although soybean meal (SBM) is excellent source of protein in diets for poultry, it is sometimes inaccessible, costly and fluctuates in supply. The SBM can partially be replaced by full-fat SBM, but the meals prepared from raw full-fat soybean contain antinutritional factors. To avoid the risk of antinutritional factors, heat treatment is always advisable, but either excessive or under heating the soybean could negatively affect the quality. However, the potential for further improvement of SBM by supplementing with microbial enzymes has been suggested by many researchers. The objective of this study was to evaluate the performance and ileal nutrient digestibility of birds fed on diets containing raw soybeans and supplemented with microbial protease. Methods: A $3{\times}2$ factorial, involving 3 levels of raw full-fat soybean (RFFS; 0, 45 or 75 g/kg of diet) and 2 levels of protease (0 or 15,000 PROT/kg) was used. The birds were raised in a climate-controlled room. A nitrogen-free diet was also offered to a reference group from day 19 to 24 to determine protein and amino acid flow at the terminal ileum and calculate the standardized ileal digestibility of nutrients. On days 10, 24 and 35, body weight and feed leftover were recorded to calculate the body weight gain (BWG), feed intake (FI) and feed conversion ratio (FCR). On day 24, samples of ileal digesta were collected at least from two birds per replicate. Results: When RFFS was increased from 0 to 75 g/kg of diet, the content of trypsin inhibitors was increased from 1747 to 10,193 trypsin inhibitors unit (TIU)/g of diets, and feed consumption of birds was also reduced (P < 0.05). Increasing RFFS level reduced the BWG from hatch 0 to 10 d (P < 0.01) and hatch to 24 d (P < 0.05). The BWG of birds from hatch to 35 was not significantly (P = 0.07) affected. Feed intake was also reduced (P < 0.05) during 0 to 35 d. However, protease supplementation improved (P < 0.05) the BWG and FCR during 0 to 24 d. Rising levels of RFFS increased the weight of pancreas (P < 0.001) and small intestine (P < 0.001) at day 24. Except for methionine, apparent and the corresponding standardized ileal digestibility of CP and AA were reduced (P < 0.01) by increasing levels of RFFS in diets. Conclusion: This study showed that some commercial SBM could be replaced by RFFS in broiler diets, without markedly compromising productivity. The AID and SID of CP and lysine were slightly improved by dietary supplementation of microbial protease.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.107-114
• /
• 2016

Purpose - Loading can decrease the productivity due to the possibility of carrying out with the opposite order of storage in container terminal. When the container is to be taken out, it is needed to move the container stacked upon the container to be carried out to other place temporarily. It is called as rehandling. Remarshalling, with the loading plan, is the arranging the containers before the ship arrives in order to avoid the rehandling during the carrying out. The present study tried to find out the factors affecting the efficiency when building the remarshalling plan with the utilization of neighboring storage space as a outer slot, and analyzed the efficiency of several remarshalling algorithms with the combination of those factors. Research design, data and methodology - The present study used, when the remarshalling plan is prepared for utilizing the outer slot, the simulation methods in order to compare the efficiency of the remarshalling algorithms which made with the factors affecting the efficiency. The factors affecting the efficiency are the method of making the child node, method of arrangement, and possibility of application of FIX. In order to analyze the affecting factors on the efficiency, several algorithms are prepared with the combination of production of the child node and the arrangement method with the availability of FIX application. With this algorithm, the effect of the factors on the efficiency after building up of remarshalling plan with the target on the bay with 10 rows, 8 columns, and 10 indices. Results - The method of rearrangement and making of a child node as the factor affecting the efficiency of remarshalling utilization of the outer bay were studied. It is efficient to combine the method of making a child node with MCS in order to reduce the number of moving the containers. For reducing the time in carrying out, it was found that all arrangement methods should be combined with RCS for the efficiency. The result of experiment shows the application of FIX with good result in case of succession ratio. In addition, when FIX was not applied, all of the most combinations resulted in short time in remarshalling. As a result, it can be concluded that the algorithm with proper combination of making the child node and the arrangement can increase the job efficiency based on the importance. Conclusion - The present study suggested and analyzed the algorithms with the combination of the arrangement method, the making of child node, and FIX. It is needed to develop the algorithm to judge the possibility whether the best remarshalling plan can be built or not within the bay in order to find a better method between the two cases such as within the bay and outer the bay. As a method for extending the study on the factors affecting the efficiency, it is possible to find out the way to build the remarshalling plan within the permitted time under any storage situation.

• Journal of the Korean Regional Science Association
• /
• v.6 no.2
• /
• pp.123-147
• /
• 1990

This paper examines the changing geography of producer service industries in the 1980s. The foci of this study are to analyze the regional distribution of each producer services, and to reveal the spatial linkage of producer services. Further this paper asserts the potential role of producer services for reducing the potential endogenous development in the periphery. During the 1981-86 period, producer service industries grew more rapidly than other service sectors and manufacturing sector. The main reason of the raid growth of producer services is attributable to an increase in demand for intermediate services from manufacturing firms. In order to compete an increasingly complex business environment, firms have expanded the amount of effort devoted to activities such as planning, coordination and control, and consequently have increased their use of producer services. The most distinctive feature of the location of producer services is spatial concentration into Seoul and surrounding region. Especially the degree of the concentration o business services into the Capital Region has been accelerating during the 1990s. The pattern of employment growth and regional distribution of producer services show a clear core / periphery disparity. Much of the regional inequality in producer services is largely due to variation in demand associated with the pattern of corporation headquarters with the pattern of corporation headquarters and branch plants location with large manufacturing firms. The analysis of spatial division of labor reflects that producer services are related to the location of headquarters in manufacturing industry. Headquarters in manufacturing firms and business service firms tend to cluster each other. Most of the headquarters spatially separated from branch offices are clustered heavily in Seoul. Especially headquarters of business services and insurance services are overwhelmingly concentrated into Seoul. The firms whose headquarters are located in Seoul have a linkage pattern on a nationwide scale. It is viewed have little potential for generating local multiplier effects and regional development. In the light of the result of this study, producer services are not likely to disperse soon to peripheral regions. Consequently the absence of policies directed at enhancing producer sevice in the periphery, concentration tendency would continue to reinforce the core's dominance at the expense of peripheral regions. From a regional perspective, the quality of a region's producer service sector is a key determinant of economic growth, since manu industrial location decisions are influenced by the differential availability of producer services among regions. Poor performance of producer services in peripheral regions seemed to be linked to the region's manufacturing base. Low-wage, standardized branch plants are not likely to induce the growth in knowledge intensive services associated with high-technology corporate headquarters. Producer services may help to create and attract new business including manufacturing firms, and also to enhance the productivity and competitiveness of local firms. Therefore the provision of service producing activities would be lead not only to generate and retain endogenous development but also to attract external firms, especially small and medium sized firms which have a lower propensity of internalized services. Hence, it may be more efficient to create and expanse new locally owned producer services rather than to attract branch plants of mult-locational firms in order to make indigenous economic development.

• Journal of Applied Biological Chemistry
• /
• v.54 no.1
• /
• pp.1-6
• /
• 2011

${\gamma}$-PGA(poly-${\gamma}$-glutamic acid) is an unusual anionic polypeptide that is made of D- and L-glutamic acid units connected by amide linkages between ${\alpha}$-amino and ${\gamma}$-carboxylic acid groups. ${\gamma}$-PGA has been isolated from many kinds of organisms. Many Bacillus strains produce ${\gamma}$-PGA as a capsular material of an extracellular viscous material. It is safe for eating as a viscosity element of fermented soybean products such as Chungkookjang and Natto. It is biodegradable, edible and nontoxic toward humans and the environment and its molecular weight varies from ten thousand to several hundred thousand depending on the kinds of strains used. Therefore, potential applications of ${\gamma}$-PGA and its derivatives have been of interest in the past few years in a broad range of industrial fields such as food, cosmetics, medicine, water-treatment, etc. In this study, a bacterium, Bacillus subtilis GS-2 isolated from the Korean traditional seasoning food, Chungkookjang could produce a large amount of ${\gamma}$-PGA with high productivity and had a simple nutrient requirement. Based on carbon utilization pattern and partial 16S rRNA sequence analysis, the GS-2 strain was identified as B. subtilis. The determination of purified ${\gamma}$-PGA was confirmed with thin layer chromatography (TLC), high performance liquid chromatography (HPLC), fourier transform infrared (FT-IR) spectra, and $^1H$-nuclear magnetic resonance ($^1H$-NMR) spectroscopy.

• Microbiology and Biotechnology Letters
• /
• v.9 no.4
• /
• pp.197-205
• /
• 1981

Penicillin amidase of Bacillus megaterium was recovered from the fermentation broth by adsorption on celite and immobilized by entrapping the adsorbed enzyme in acrylamide gel. The operational stability in column reactor was greatly increased by entrappment as compared with that of without entrappment. The optimum pH of the immobilized enzyme was 8.7 with broader activity profile than that of the free enzyme, while the most stable pH range appeared to be between pH 7.5 and 8.0. The optimum temperature was shifted to 5$0^{\circ}C$ from 45$^{\circ}C$ for the soluble enzyme. The values of Km and the inhibition constants for 6-APA( $K_{ia}$ ) and phenylacetic acid ( $K_{ip}$ ), were 4.55 mM, 36.5mM, and 10.5mM, respectively. No significant internal pore diffusion limitation was found since the value of effectiveness factor was 0.95. The operational half life in a column reactor at pH 8.0 was 6.8 days at 4$0^{\circ}C$ and 47 days at 3$0^{\circ}C$, whereas that of without entrappment was only 1 day and 4 days, respectively. The performance of a batch and a column reactor was also discussed with respect to the productivity. The results demonstrated that the entrappment of an adsorbed enzyme for the enhancement of the operational stability of the immobilized enzyme was useful especially when an extracellular enzyme was used.

• Korean Business Review
• /
• v.19 no.1
• /
• pp.223-240
• /
• 2006

The purpose of this study is to review the current state of the transformational leadership and LMX approach to the study of leadership. Leadership research has witnessed a shift from traditional transactional models to a new genre of theories of transformational and charismatic leadership and LMX. Transformational leadership theories offer the promise of extraordinary individual and organizational outcomes. Leaders motivate followers to perform beyond expected levels by activating higher order needs, fostering a climate of trust, and inducing them to transcend their self-interest for the organization's sake. Numerous investigations point of the robustness of the effects of such leadership on individual and organizational outcomes such as job satisfaction, organizational commitment, and performance. LMX theory suggests that leaders do not use the same style in dealing with all subordinates, but rather develop a different type of relationship or exchange with each subordinate. These relationships range from those that are based strictly on employment contracts to those that are characterized by mutual trust, respect, liking, and reciprocal influence. LMX has been positively related to job satisfaction, productivity, and career progress of managers and negatively related to turnover and employee grievances. In conclusions, effective leaders link achievement of organizational goals to follower fulfillment of self-development goals, with the former advancing the latter.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.111-121
• /
• 2015

Until now, the operation of community welfare centers for people with disabilities has brought a positive or a generous awareness. Nevertheless, in order to obtain a wide range of welfare outcomes efficiently, the imperative step in rehabilitation researches is to determine whether reasonable and scientific services are being provided to people with disabilities in rehabilitation centers. The purpose of this study was to analyze efficiency and productivity of 176 community welfare centers for people with disabilities. As a result, average technical efficiency for community welfare centers for people with disabilities was 0.4488; pure technical efficiency and scale efficiency was 0.6040 and 0.7080, respectively. The major conclusions of this study were as follows. First, applying the technical efficiency analysis, DMU2, DMU3, DMU8, DMU9, DMU11, DMU13, DMU14 were shown above average. It seems to have a regard for political elements in accordance with the regional social and economic differences. Second, as a result of scale efficiency analysis, the inefficient community welfare centers for people with disabilities such as DMU1, DMU5, DMU12, DMU16 are required to improve the number of employees, revenue, facility area. Finally, this study is expected to be an effectiveness analysis and performance evaluation for the rehabilitation services.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.937-950
• /
• 2004

With growing population of internet and web applications, distributed environment is considered to be the standard architecture of application. A network management systems(NMS) is necessary to control and monitor the complex network resources for providing and sharing the heft quality service. We recognize the NMS as a standard infrastructure for supporting efficient networking and a separate commercial applications. We believe every resource including software, hardware and environment for the network management should be separated from special protocols, vendors and applications. Therefore, We need a standard network management system that is efficient and consistent because of the heterogeous network features. In regards to software development, software reuse through assembling and extending the reusable elements such as patterns and components assures to realize the best productivity and quality The component based development(CBD) methodology that can assemble black box though well defined interfaces makes it possible to develop easer and quicker applications and is proved as the best software development solution involved in construction, selection and assembly of components. In this thesis, we describe the architecture for the network management and identify, define and design the components through analysis and design in the network management domain and Identified components mapped to the component architecture. We also specify the component development and design and implement the component for developing the network management. Implemented components apply to the component repository system that register, retrieve and understand the components. We analyze, design and implement the entire network management system based on configuration, connection, performance and fault management through the pre-developed components.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.26-34
• /
• 2014

Highway construction is a combination of linear, repetitive, and highly equipment intensive operations. Various types of construction equipment are deployed to ensure undisrupted performance of construction, and thus productivity improvement and cost-saving can be achieved through well-thought-out planning. The selection of construction equipment is dependent upon construction sequence, site conditions, and construction methods. In the process of planning, management should consider various types of construction methods per each type of construction operation. Also, management should map out proper construction equipment operation plan that takes the construction duration and cost measures into consideration. However, limited availability of historic data from the similar types of operations has been a stumbling block to proper construction planning, making the operations performed based upon experience and intuition guided by rules-of-thumb. As a consequence, the planing phase rarely provided an adequate validity in the implementation phase. The researchers developed a process logic for each construction type that management can utilize from early phase of highway construction planning process. Moreover, derived the construction equipment combination optimized for efficiency by using the process simulation technique. The developed method is expected to be useful for the decision-making process that aims to evaluate efficiency of various process plans and to ensure optimal selection of construction equipment for highway construction projects.

• Journal of Aquaculture
• /
• v.13 no.4
• /
• pp.331-338
• /
• 2000

To establish an alternate technology for all male seed production of Nile tilapia, Oreochromis niloticus at hatchery scale, the performance of progenies produced by crossing superfemale with sex reversed male was evaluated. Free crossings between 21 superfemales and 7 sex reversed males stocked in an aquarium for 60 days resulted in the production of 93.5 % male progenies, compared to 53.2 % males produced by an equal number of normal females and normal males. Spawning frequency was lower (19 times) in the experimental cross including superfemales than that (24 times) in the control including normal females. Seed production in the experimental aquarium was (3,085) significantly lower than that (3,797) of the control. Both in terms of seeds per female per day or seeds per g female per day, seed productivity did not significantly differ between these groups. The alternate technology involving crossing between superfemale and sex reversed male has proven to be an efficient alternate technology for mass production of all male seeds at the hatchery scale.