• 대한공간정보학회지
• /
• 제22권4호
• /
• pp.165-173
• /
• 2014

노천채굴방식의 광산은 갱내채광에 비해 비교적 작업이 안전하고 채수율이 높으며 생산 원가가 저렴하여 대량생산과 공급이 가능하다는 장점이 있으나 산림훼손, 폐석 및 광재(鑛滓)의 퇴적, 광미(鑛尾)의 배출, 분진, 폐수, 소음, 지반침하, 토사유출, 산사태 등의 환경재해 유발요인들을 내재하고 있어 대표적 환경규제의 대상으로 흔히 지적되고 있다. 이에 본 연구에서는 노천광산에 대한 지형 및 환경 변화에 따른 문제에 대처하고, 친환경 생태학적 광간의 개발 및 복원을 위해서는 노천광산에 대한 주기적이고 정확한 모니터링 기법과 시스템을 개발하고자 하였다. 이에 본 연구에서는 노천광산에 대한 지형 및 환경 변화에 따른 문제에 대처하고, 친환경 생태학적 광간의 개발 및 복원을 위해서는 노천광산에 대한 주기적이고 정확한 모니터링 기법과 이를 이용한 시스템의 개발이 요구된다. 이에 기 개발되어있는 공간정보 오픈 플랫폼과 오픈소스 GIS툴을 이용하여 노천광산 모니터링 시스템 개발 환경 조성을 하고자 한다.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.136-143
• /
• 2005

Open architecture controller (OAC) is well known technology in factory automation. To better understand the requirements of OAC, authors have discussed the OAC related topics with a number of control experts who represents different segments of the machining industry. There is no common concept that is accepted or used, however, the common ideas for OAC is the control system that is hardware independent, interchangeable, and easily scalable. This paper presents summary of the understaning and requirements of OAC. Based on the requirements of OAC, authors developed the software based PC-CNC. The main focus of the PC-CNC was on the user customization capability and open interface between control networks in manufacturing system. This paper introduces the developed PC-CNC briefly. In addition to introduction of the PC-CNC, to fill the gap between end users and vendors of OAC, this paper presents two applications using OAC. One is a remote monitoring system. The OPC (Ole for Process Control) standard interface was used to monitor the status of open architecture CNC across network. The other is the remote production management module for machine tools using standard database interface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.963-966
• /
• 1988

This paper describes the development of a prototype expert system, which is designed to analyze loom production efficiency by employing a loom monitoring system. The problem field of the prototype expert system is the loom failure analysis which has a great effect on prouction efficiency, and the characteristic graph in which the loom failure causes are classified and organized, is used in the analysis. The knowledge for characteristic graph is organized, and an effective inference engine- is developed. The developed system is tested and modified using hypothetical loom failure causes, and the feasibility of the expert system application to extend the functions of the loom monitoring system is proved.

• 한국정보통신학회논문지
• /
• 제20권11호
• /
• pp.2100-2106
• /
• 2016

자동화시스템은 PLC를 사용하여 생산제품의 제조 공정상태를 감시하고 센서에서 전달되는 센서정보를 처리한다. 본 연구에서는 자동화시스템에 사용되고 있는 제어용 계전기의 상태를 감시하는 원격감시시스템을 제안한다. 제안한 시스템은 제어 릴레이모듈, 원칩프로세서 모듈, 컴퓨터 모니터링시스템과 제어용 계전기의 내역을 입력하고 관리하는 데이터베이스시스템으로 구성한다. 컴퓨터 모니터링시스템은 제어용 계전기의 작동상태와 수명을 모터링할 수 있도록 구성하였고, 데이터베이스는 제어용 계전기의 투입 일자를 입력하고 수정이 가능하게 구성하였으며, 제어용 계전기의 작동상태의 정보를 자동으로 프린트할 수 있도록 구성하였다. 원격감시시스템에서 제어용 계전기의 고장상태를 실시간으로 파악하고, 고장부품을 신속하게 교체하여 정상가동에 소요되는 시간을 최소화할 수 있도록 하였다.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.155-160
• /
• 2019

본 논문에서는 신재생에너지와 농업ICT를 활용한 시설농업용 제어와 에너지생산량과 소비량 예측을 통해 효율적인 계통 독립형 ESS제어시스템을 제안한다. 제안된 시스템은 전력계통 정밀 위상 및 데이터를 시각화하여 유지보수 및 모니터링을 수행할 수 있는 통합 관리 시스템으로 장애 발생 시 자동으로 이에 대해 대처하고 데이터 수집, 처리, 제어가 가능하며, 태양광발전의 전력 발전과 설치된 설비들의 소비 패턴, 설비들의 동작 트랜드를 분석, 기상청 OpenAPI를 활용한 에너지 생산량 소비량 예측을 통해 최적의 에너지 운영 방법을 제시함으로써 불필요한 에너지 소비를 줄이고 운영비용을 절감할 수 있다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.183-189
• /
• 1999

Nowadays advanced manufacturing companies are trying to find a way to check the performance of their production equipments and plants from remote sites. However, it is hard to monitor the status of machine or to check the performance of the processes because the regional limitation of distributed environment. This paper presents research results in the real time monitoring of machining processes and internet_based operation of machining centers via internet, which is implemented using VRML and JAVA.

• 농업과학연구
• /
• 제38권4호
• /
• pp.747-752
• /
• 2011

Wireless technology has enabled farmers monitor and control protected production environment more efficiently. Utilization of USN (Ubiquitous Sensor Network) devices also brought benefits due to reduced wiring and central data handling requirements. However, wireless communication loses signal under unfavorable conditions (e.g., blocked signal path, low signal intensity). In this paper, performance of commercial wireless communication devices were evaluated for application to protected crop production. Two different models of wireless communication devices were tested. Sensors used in the study were weather units installed outside and top of a greenhouse (wind velocity and direction, precipitation, temperature and humidity), inside ambient condition units (temperature, humidity, $CO_2$, and light intensity), and irrigation status units (irrigation flow and pressure, and soil water content). Performance of wireless communication was evaluated with and without crop. For a 2.4 GHz device, communication distance was decreased by about 10% when crops were present between the transmitting and receiving antennas installed on the ground, and the best performance was obtained when the antennas were installed 2 m above the crop canopy. When tested in a greenhouse, center of a greenhouse was chosen as the location of receiving antenna. The results would provide information useful for implementation of wireless environment monitoring system for protected crop production using USN devices.

• Geomechanics and Engineering
• /
• 제24권4호
• /
• pp.337-348
• /
• 2021

Brillouin Optical Frequency Domain Analysis (BOFDA) is a distributed fiber optic sensing (DFOS) technique that has unique advantages for performance monitoring of piles. However, the complicated production process and harsh operating environment of offshore PHC pipe piles make it difficult to apply this method to pile load testing. In this study, sensing cables were successfully pre-installed into an offshore PHC pipe pile directly for the first time and the BOFDA technique was used for in-situ monitoring of the pile under axial load. High-resolution strain and internal force distributions along the pile were obtained by the BOFDA sensing system. A finite element analysis incorporating the Degradation and Hardening Hyperbolic Model (DHHM) was carried out to evaluate and predict the performance of the pile, which provides an improved insight into the offshore pile-soil interaction mechanism.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.184-191
• /
• 2010

In the environment of 450mm wafers production known as the next-generation semiconductor production process, one of the most significant features is the full automation over the whole manufacturing processes involved. The full automation system for 450mm wafer production will minimize the human workers' involvement in the manufacturing process as much as possible. In addition, since the importance of an individual wafer processing increases noticeably, it is necessary to develop more robust scheduling systems in the whole manufacturing process than so ever. The scheduling systems for the next-generation semiconductor production processes also should be capable of monitoring individual wafers and collecting useful data on them in real time. Based on the information gathered from these processes, the system should finally have a real-time scheduling functions controlling whole the semiconductor manufacturing processes. In this study, preliminary investigations on the requirements and needed functions for constructing the real time scheduling system and transforming manufacturing environments for 300mm wafers to those of 400mm are conducted and through which the next generation semiconductor processes for efficient scheduling in a clustered production system architecture of the scheduler is proposed. Our scheduling architecture is composed of the modules for real-time scheduling, the clustered production type supporting, the optimal scheduling and so on. The specifications of modules to define the major required functions, capabilities, and the relationship between them are presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.277-280
• /
• 2004

In recent die industry, web-based production control system is applied widely because of the improvement of IT technology. In result, many researches are published about remote monitoring at a long distance. The target of this study is to develop Die Discrimination System using web-based vision, and CAD API when client discriminates die in process at a long distance. Special feature of this system is to use 2D vision image and to match with DB. We can get discrimination result enough to want with short time and a little low precision in web-monitoring by development of this system.