• Journal of Microbiology and Biotechnology
• /
• 제27권3호
• /
• pp.450-459
• /
• 2017

This study evaluated the effects of culture conditions, including carbon and nitrogen sources, L-monosodium glutamate (MSG), and initial pH, on gamma-aminobutyric acid (GABA) production by Lactobacillus brevis HYE1 isolated from kimchi, a Korean traditional fermented food. L. brevis HYE1 was screened by the production analysis of GABA and genetic analysis of the glutamate decarboxylase gene, resulting in 14.64 mM GABA after 48 h of cultivation in MRS medium containing 1% (w/v) MSG. In order to increase GABA production by L. brevis HYE1, the effects of carbon and nitrogen sources on GABA production were preliminarily investigated via one-factor-at-a-time optimization strategy. As the results, 2% maltose and 3% tryptone were determined to produce 17.93 mM GABA in modified MRS medium with 1% (w/v) MSG. In addition, the optimal MSG concentration and initial pH were determined to be 1% and 5.0, respectively, resulting in production of 18.97 mM GABA. Thereafter, response surface methodology (RSM) was applied to determine the optimal conditions of the above four factors. The results indicate that pH was the most significant factor for GABA production. The optimal culture conditions for maximum GABA production were also determined to be 2.14% (w/v) maltose, 4.01% (w/v) tryptone, 2.38% (w/v) MSG, and an initial pH of 4.74. In these conditions, GABA production by L. brevis HYE1 was predicted to be 21.44 mM using the RSM model. The experiment was performed under these optimized conditions, resulting in GABA production of 18.76 mM. These results show that the predicted and experimental values of GABA production are in good agreement.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.168-168
• /
• 2022

According to the 5th Climate Change Report, global average temperature in 2081~2100 will increase 1.8℃ based on RCP 4.5 and 3.7℃ based on RCP 8.5 from the current climate value (IPCC Working Group I AR5). As temperature is expected to increase due to global warming and the intensity and frequency of rainfall are expected to increase, damage to crops is expected, and countermeasures must be taken. This study intends to evaluate rice growth in terms of nitrogen utilization efficiency according to future climate change conditions. In this experiment, Oryza sativa cv. Shindongjin were planted at the SPAR facility of the NICS in Wanju-gun, Jeollabuk-do on June 10, and were planted and grown according to the standard cultivation method. Cultivation conditions are high temperature, high CO₂ (current temperature+4.7℃·CO₂ 800ppm), high temperature (current temperature+4.7℃·CO₂ 400ppm), current climate (current tempreture·CO₂ 400 ppm). Nitrogen was varied as 0, 9, 18 kg/10a. The N content and C/N ratio of all rice leaves, stems, and seeds increased at high temperature, and the N content and C/N ratio decreased under high temperature and high CO₂ conditions com pared to high temperature. Compared to the current climate, NUE increases by about 8% under high temperature and high CO₂ conditions and by about 2% under high temperature conditions. This seems to be because the increase in temperature and CO₂ induced the increase in biomass. ANUE related to yield decreased by about 70% compared to the current climate under high temperature conditions, and decreased by about 45% at high temperature and high CO₂, showing a tendency to decrease compared to high temperature. This appears to be due to reduced fertility and poor ripening due to high temperature stress. However, as the nitrogen increased, the number of ears and the number of grains increased, slightly offsetting the production reduction factor.

• Journal of Microbiology and Biotechnology
• /
• 제18권6호
• /
• pp.1115-1120
• /
• 2008

A novel cathepsin B inhibitor-producing bacterium was isolated from marine sediments and identified based on its 16S rDNA sequence as Pseudomonas sp. strain PB01 (Accession No. EU126129). The growth and enzyme inhibitor production were investigated under various culture conditions. A mixture of organic nitrogen source was required for the optimal production, whereas both glucose and maltose proved to be the effective carbon sources for cathepsin B inhibitor production. Other optimal culture conditions included temperature range between 25 and $28^{\circ}C$, initial medium pH of 6.6, and shaking speed of 200 rpm. Under these optimal conditions, the maximum inhibitory activity from culture broth was approximately 50% after 30 h of cultivation. Additionally, kinetic study revealed that inhibitor production paralleled with cell growth, which suggested that the inhibitor may be a primary metabolite of that bacterium.

• Journal of Life Science
• /
• 제9권2호
• /
• pp.5-8
• /
• 1999

We isolated a sphingonyelinase (SMase) inhibitor, which would be a potential reagent to regulate cell proliferation, oncogenesis, and inflammation, from a strain of Streptomyces sp.. In this paper, we report the optimal conditions for the production of SMase inhibitor, designed as sphinin, from Streptomyces sp. F50970. The optimal carbon and nitrogen source were 1% soluble starch and 0.05%-0.15% trypton. Most of monosaccharides and high concentration of soluble starch above 1.0% caused falling of pH and sphinin production. Zn2+, Cu2+, Fe2+, Mn2+, and Co2+inhibited cell growth and the production of sphinin. Inorganic phosphate promoted the sphinin production. Optimal initial pH for the production of sphinin was 7.5-8.0. Addition of CaCO3 to the medium resulted in an increase of inhibitor production. Based on these results, we designed a fermentation medium for the production of a SMase inhibitor, sphinin, from Streptomyces sp. F50970.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권2호
• /
• pp.40-45
• /
• 2005

This paper has presented an application of an optimum grinding conditions based on the fuzzy logic. Fuzzy logic can handle vague and uncertain knowledge, and presents a scheme for integrating data with various kinds of grinding data. Especially, this research is capable of determining the grinding conditions taking into account some fuzzy membership function represented for trapezoidal form such as hardness and surface roughness of workpiece, material tensile strength and elongation, and requirement of grinding method. Larsen's fuzzy production method utilizing the fuzzy production rule can be applied on the establishment of grinding conditions, and also the output value obtained by the center of gravity method can effectively utilize the optimum grinding conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권1호
• /
• pp.112-118
• /
• 2007

The present study was conducted to investigate the attributes of ram sexual behaviour under different social conditions. Six intact rams and eight overiectomized ewes were used in this experiment. Ewes were artificially brought into oestrus. All mating traits were recorded every 10 sec during a 1 h mating session under five social conditions viz., ram exposed to single oestrus ewe, ram exposed to single oestrus ewe and audience ram, ram exposed to multiple oestrus ewes, ram exposed to single oestrus ewe with competitor ram and ram exposed to multiple oestrus ewes with competitor ram. Mean intensity of the mating activities during the 1 h mating session under five social conditions was compared. Either vocalization or leg kicking was found to be the predominant teasing activity under all five conditions. Sniffing differed significantly (p<0.05) between different social conditions. Vocalization, leg kicking, and leg kicking with vocalization did not differ significantly (p<0.05) between different social conditions. Mounts/h in the multiple oestrus ewe condition was higher and differed significantly (p<0.05) from other social conditions. Ejaculations/h for the experimental ram was higher when exposed to multiple oestrus ewes in comparison to other social conditions. Mounts/ejaculation was low in the audience ram condition in comparison to the other four social conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권2호
• /
• pp.215-219
• /
• 1999

This study aims to make detail examination of smallholder dairy farming systems in the Nongpho Dairy Cooperative. Forty-three dairy farms were selected from three geographical areas i.e. irrigated area, municipality area, and factory area. Within each area some number of sample farms were selected from each of the three levels of farm and animal crowdedness (very crowded, crowded, and not crowded farms). Detail data were collected during 1996 to 1997, they were socio-economic conditions of the sample farms and farmers, dairy production systems and management of resources (animals, bam, feeds, stocking rates, herd structure, animal body conditions, milk yield and milk quality, manure and farm wastes management, and other related items). Detail information useful for the improvement of farm production efficiency were discussed. It was very clear that much improvement of smallholder dairy production can be achieved if the recommendations given by this study were implemented.

• Journal of Microbiology and Biotechnology
• /
• 제18권3호
• /
• pp.560-567
• /
• 2008

An efficient method to produce water-soluble polysaccharides from Lentinus lepideus is described. The productivity of both endopolysaccharides (PPS) and exopolysaccharides (EPS) was compared under various culture conditions. The effect of treating their own PPS and EPS on immune cytokine production was also studied in relation to culture factors. High yield production of EPS required a moderate culture temperature $(25^{\circ}C)$ as well as long culture period (16-20 days). In contrast, PPS production required a high culture temperature $(30^{\circ}C)$ and short culture period (8 days). Most of the carbon sources did not affect polysaccharides and mycelial production except for sucrose. Immune cytokine levels in the EPS treatment varied among carbon sources or culture periods. PPS did not appear to affect much on the production of cytokines, regardless of the culturing factors, except for the culture period. These results suggest that the optimal culture conditions for L. lepideus vary according to culture purposes, and different culture conditions should be used for different targets including mycelial biomass, EPS, and PPS. Whereas the immunomodulating activitiy of EPS appeared to be affected by culture conditions in L. lepideus, that of PPS did not.

• ALGAE
• /
• 제39권2호
• /
• pp.109-127
• /
• 2024

High production and efficient harvesting of microalgae containing high omega-3 levels are critical concerns for industrial use. Aeration can elevate production of some microalgae by providing CO₂ and O₂. However, it may lower the production of others by generating shear stress, causing severe cell damage. The mixotrophic dinoflagellate Gymnodinium smaydae is a new, promising microalga for omega-3 fatty acid production owing to its high docosahexaenoic acid content, and determining optimal conditions and methods for high omega-3 fatty acid production and efficient harvest using G. smaydae is crucial for its commercial utilization. Therefore, to determine whether continuous aeration is required, we measured densities of G. smaydae and the dinoflagellate prey Heterocapsa rotundata in a 100-L semi-continuous cultivation system under no aeration and continuous aeration conditions daily for 9 days. Furthermore, to determine the optimal conditions for harvesting through centrifugation, different rotational speeds of the continuous centrifuge and different flow rates of the pump injecting G. smaydae + H. rotundata cells into the centrifuge were tested. Under continuous aeration, G. smaydae production gradually decreased; however, without aeration, the production remained stable. Harvesting efficiency and the dry weights of omega-3 fatty acids of G. smaydae + H. rotundata cells at a rotational speed of 16,000 rpm were significantly higher than those at 2,000-8,000 rpm. However, these parameters did not significantly differ at injection pump flow rates of 1.0-4.0 L min^-1. The results of the present study provide a basis for optimized production and harvest conditions for G. smaydae and other microalgae.

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.209-217
• /
• 2003

The traditional Kanban needs a lot of preconditions for fitting conditions of dynamic production processing environment. The traditional Kanban isn't suitable conditions of dynamic production processing environment. Therefore conditions of dynamic production processing environment is needed more stable system. This study is describe CONWIP system such as suitable in dynamic production processing environment. Most Pull system is a Kanban system than use Kanban cards or signal for production management and inventory control. The object of Kanban system is reducing inventory between shop-floor that can reduce inventiry cost. If the system reduce the number of Kanban cards would be reduce the working process WIP, can be reduced and can be found all potential problem of production between shop-floors. This study apply to CONWIP system model for Korean industrial companies.