• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.583-587
• /
• 2015

This Purpose of this study is to develop a system for stable production without troubling side effects, scalp and skin, and sensitivity to temperature and humidity, but the ozone-cream at a constant effective value and the durability of peroxide safe discharge tube. Furthermore, olive oil and ozone is reacted with the wish to apply to the manufacturing technology. If peroxide value of ozonized olive oil exceeded 1200 meg/kg, there may be microbial disinfection. However, to be produced with a minimum of risk because they look to the scalp and skin sensitization is the purpose of the present study. And also the durability of the discharge tube was tested during the production unit for stable production. And the experimental results, Peroxide value of the ozonized olive oil was measured to less than 1300 meg/kg, also it showed a stable result of the discharge tube.

• Journal of Information Technology Services
• /
• v.23 no.3
• /
• pp.55-63
• /
• 2024

To grasp the structure of an industry and monitor its changes, it is essential to utilize relevant statistics. Various statistics are being compiled regarding the software (SW) industry, presenting diverse numerical values. However, without a precise understanding of the scope and measurement methods inherent to each statistic, gaining a rigorous understanding of the industry's structure and evolving trends becomes challenging. Moreover, significant discrepancies between similar statistics often lead to confusion among users. In the software (SW) industry, key statistics commonly used include SW production value and SW market size. As of 2022, the annual domestic SW production value is reported as 77.4 trillion KRW (based on ICT Survey), while the SW market size for the same year is stated as 38.5 trillion KRW (according to IDC data). Although production value and market size may seem conceptually similar, there is approximately a twofold difference between the figures provided. Without understanding the meanings of each statistic and the differences between them, there are limitations in utilizing these statistics effectively. While statistics are utilized for various purposes such as policy development or causal analysis of policy using statistical raw data, research that presents and analyzes the precise meanings and limitations of each SW-related statistic is virtually non-existent. Thus, this study aims to compare and analyze the methodologies and differences among key statistics used to represent the SW industry: SW production value, SW market size, and SW GDP statistics. Through this analysis, the goal is to contribute to a better understanding of the SW industry's structure and enable more accurate and rigorous utilization of relevant statistics.

• Kyungpook Mathematical Journal
• /
• v.19 no.1
• /
• pp.135-139
• /
• 1979

We consider the problem that how must the production of certain item vary as a function of time, if for known losses due to depreciation the total amount of the product is to have a constant value. The integral equation associated with the problem is solved by an appeal to the convolution quotients. The production function comes out to be an expression containing the generalized Laguerre polynomials. The loss function and the production function are tabulated for different values of the parameter by using an IBM 370/145 computer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.511-514
• /
• 1999

Data pertaining to 1111 first lactation performance record of Karan Fries (Holstein-Friesian $\times$ Zebu) cows spread over a period of 21 years and sired by 72 bulls were used to examine the efficiency of sire indices for lactation milk production using auxiliary traits. First lactation length, first service period, first calving interval, first dry period and age at first calving were considered as auxiliary traits. The efficiency of this method was compared with simple daughter average index (D), contemporary comparison method (CC), least-square method (LSQ), simplified regressed least-squares method (SRLS) and best linear unbiased prediction (BLUP) for lactation milk production. The relative efficiency of sire evaluation methods using one auxiliary trait was lower (24.2-32.8%) in comparison to CC method, the most efficient method observed in this study. Use of two auxiliary traits at a time did not further improve the efficiency. The auxiliary sire indices discriminate better among bulls as the range of breeding values were higher in these methods in comparison to conventional sire evaluation methods. The rank correlation between breeding values estimated using auxiliary traits were high (0.77-0.78) with CC method. The rank correlation among auxiliary sire indices ranged from 0.98 to 0.99, indicating similar ranking of sire for breeding values of milk production in all the auxiliary sire indices.

• KSBB Journal
• /
• v.8 no.5
• /
• pp.478-482
• /
• 1993

Perfusion culture was conducted in Celligen perfusion culture system using a self-constructed hybridoma cell and low serum medium. The culture system employed hollow fiber to separate cells from the culture broth. Maximum cell density of $2.1\times10^7$ ce11s/m1, 10 times higher than in batch culture, could be achieved. Concentration of monoclonal antibody (MAb) was 4 times higher and production rate at maximum feed rate was 9 times higher than in batch culture. Glucose concentration was very important for the cell growth and MAb production. When glucose concentration was below 1g/l, i. e. 0.5~0.9g/l, specific MAb production rate decreased but cell concentration still increased. As the glucose concentration goes above 1g/l, specific MAb production rate increased and remained at maximum value at more than 1.5g glucose/l. The maximum value of the specific Mab production rate was similar to that of batch culture.

• The Journal of Fisheries Business Administration
• /
• v.43 no.3
• /
• pp.31-41
• /
• 2012

This paper was conducted to study the economic valuation for Nursery-Phase production of the tidal flat oyster in Korea. Benefit-cost(B/C) model used to indicate the effects of economic valuation. Using discounting rates(i.e., 4.5%, 6.5% and 8.5%), the model compared revenues and costs that occur at different times from 2012 to 2018. This study also estimated various submodels, which are Benefit Cost Ratio(B/C ratio), Net Present Value(NPV), Internal Ration of Return(IRR), to compare profit of Nursery-Phase production styles and analyzed returns to evaluate the scenarios. Sensitivity analysis were conducted for various scenarios. The results suggest as follows. First, the oyster spat to the shell height of 3~5cm was more profit than the shell height of 1~3cm. Second, all of sensitivity analysis with submodels were economic valuation such that B/C ratio > 1, NPV > 0 and IRR > discounting rate. Third, the payback period was about 3years after installed Nursery-Phase production system.

• Ocean and Polar Research
• /
• v.36 no.2
• /
• pp.157-163
• /
• 2014

This study analysed the economic feasibility per hectare of grow out phase production of Oyster farming by rising water temperature in Ocean. Elevated Water temperature by climate change had a bad influence for oyster production and economic feasibility. In the case of production units, the total output of oyster decreases from 213,840 to 205,594 units. Using cost-benefit analysis with discounting rates (5.5%), we estimated the net present value (NPV) and benefit cost ratio (BCR) until 2100 years. The model results showed that the NPV without water temperature rise was 1,565,619,893 won and the NPV with water temperature rise was 1,540,493,059 won. Also, BCR estimated that the former was 2.095 better than the latter was 2.077. To summarise, the economic effect per hectare of water temperature rise in ocean did the damage to the economic loss about 25,126,834 won.

• Health Policy and Management
• /
• v.10 no.1
• /
• pp.126-147
• /
• 2000

This paper empirically explores the nature of the medical service industry and its various propagation effects on the economy in the input-output model, as revealed by a comparative analysis between Korea and Japan. The main findings of the paper are as follows; First, the growth of medical industry induces above-average effect on employment. Second, the industry is of the characteristics of weak both backward and forward linkage effects implying a 'final demand dependency industry'. When compared with public service sectors, however, the medical services industry shows stronger backward linkage effect than those sectors. Furthermore, it has strong repercussion effects on the goods industries. Third, in order to produce per unit of services, the medical services industry of Korea uses relatively more drugs and medical devices than that of Japan. In general, it has been shown that production structure of medical service industry in Korea is 'hardware-oriented' one; on the other hand, 'software-oriented' in Japan which means that, as intermediate inputs, outsourcing and informatization has been used than those of Korea. From the findings of the paper it could be emphasized that the medical organizations in Korea should put more efforts on shifting the current hardware-oriented production structure to strengthen core competence by enhancing productivity and by outsourcing to improve efficiency of production process. However, the medical organizations in Korea would not have enough incentives for high value-added production structure because they enjoy high operating surplus. Therefore, it would be necessary that government policy should be taken into account of these environments.

• Journal of Wetlands Research
• /
• v.20 no.2
• /
• pp.190-200
• /
• 2018

This study estimated the marginal production value based on the production function approach to confirm the economic value of industrial water supply projects. For this, we analyzed 4 data sets classified by 11 industry types according to Cobb-Douglas Function, Translog Function, and Translog function with sector dummy variables. As a result, the average industrial marginal product value of the entire industry was 3,217~5,357 won/ton, 2,994~4,569 won/ton and 3,620~5,342 won/ton, respectively. The results by industry type were the largest in furniture and other manufacturing industries and showed the lowest marginal production value in the textile and leather industries. Overall, the results from the Cobb-Douglas function were highly evaluated. And the volatility according to data sets was also analyzed in the Cobb-Douglas function. There have been few studies on the economic value of industrial water compared to domestic water. It is considered that multidisciplinary consensus will be needed through active research in the future.

• Korean Journal of Construction Engineering and Management
• /
• v.3 no.4 s.12
• /
• pp.93-103
• /
• 2002

The reinforcement concrete work is the work affected by structural safety, durability, and schedule with form work. The domestic reinforcement concrete works have mainly worked the process of re-barfabrication/assembly on site. Finally it have low productivity. Then this paper analyzed waste factors and the process of re-bar fabrication/assembly on site for the productivity improvement and value-added productivity improvement. Waste factor analysis aims at maximizing value-added by the value analysis of re-bar fabrication and assembly on site. Finally, Value-AddingActivity(VAA)ismuchlessthan non-value adding activity. Especially, Non-Value-Adding Activity(NVAA) generates waste such as the activity steps, labors, equipments, materials, time, and soon. And it was non-flow production, over production, and analyzed into having to shift value. This paper aimsat maximizing value-addingactivity and minimizingnon value-addingactivity through waste factor analysis in process for the improvement of value added productivity.