• Title/Summary/Keyword: Production Practice

Search Result 782, Processing Time 0.032 seconds

Environmental Consciousness and Environmental Preservation Behavior of Textile Producers (섬유제품 생산자의 환경의식과 환경보전행동)

  • 김용숙
    • Journal of the Korean Home Economics Association
    • /
    • v.34 no.5
    • /
    • pp.183-196
    • /
    • 1996
  • The purposes of this study were to review the effects of textiles production on the environment, and to investigate the environmental consciousness and environmental preservation behavior of textile producers. This study was conducted by reference analysis and empirical research. To develope theoretical framework of dimensions of environmental behavior, references concerned were analyzed. And for empirical study, researcher developed a questionnaire based on the free writing by producers and references. The questionnaire included problems about environmental consciousness, environmental behavior, demographic variables, and environmental variables. 135 questionnaires were used for final data analysis. ANOVA and factor analysis were used. The results were as follows: First, the level of global environmental problem consciousness was relatively high. The conscious level of water pollution caused by the waste water from textile mills was the highest, and that of desertation of mountain caused by timber cutting was the lowest. The effects of textile dyers and finishers on the environment were the highest, and that of designers were the lowest. Second, the results of reference analysis showed that the dimensions of textile producers environmental behavior were resource and energy saving, solid waste reduction, and green product production. And the results of empirical study were resource and energy saving, resource reuse or recycling, solid waste reduction, and green product production, and total variances was 62.3%. The practice was the lowest. Third, global environment problem consciousness, environment problem consciousness caused by the textile life-cycle concerned, and clothing seperate-collection or not at residing place were effective on environmental behavior, and 52.45% of environmental behavior was explained with above variables.

  • PDF

Introduction to the Fisheries Industry in Ghana

  • Otumfuo, Samuel Kabu
    • Journal of Marine Bioscience and Biotechnology
    • /
    • v.3 no.1
    • /
    • pp.18-23
    • /
    • 2008
  • Fisheries constitute an important sector in national economic development, and estimate to contribute about 3% of the total GDP and 5% of the GDP in agriculture. Fish production from aquaculture has been estimated at 950 tonnes for 2004. In 2003, Ghana produced only 51.7% of its requirements from its domestic sources and in 2004, achieved 68.1% of its fish requirement through domestic production and imports. It has been estimated that the production from ponds and culture-based fisheries is worth about US$ 1.5 million a year. The aquaculture sub sector comprises largely small-scale subsistence farmers who practice extensive aquaculture in earthen ponds in contrast to the intensive practices of commercial farmers. There is one cage facility which produces 200 tonnes or 21.1% of the total output. There are several laws to regulate and govern the sector and the government has set up institutions that are responsible for developing fisheries and aquaculture policy and directing and establishing research priorities. The Directorate of Fisheries (DoF) is the lead government agency for aquaculture development and the Water Research Institute of the Council for Scientific and Industrial Research (CSIR) is mandated to carry out aquaculture research. To promote fish farming, imports of farm fish are not allowed.

  • PDF

Opportunities and Constraints of Beekeeping Practices in Ethiopia

  • Dekebo, Aman;Bisrat, Daniel;Jung, Chuleui
    • Journal of Apiculture
    • /
    • v.34 no.2
    • /
    • pp.169-180
    • /
    • 2019
  • Beekeeping has been practiced for centuries in Ethiopia. Currently, there are three broad classification of honey production systems in Ethiopia; these are traditional (forest and backyard), transitional(intermediate) and modern(frame beehive) systems. Ethiopian honey production is characterized by the widespread use of traditional technology resulting in relatively low honey yield and poor honey quality. Despite the challenges and constraints, Ethiopia has the largest bee population in Africa with over 10 million bee colonies, of which 5 to 7.5million are hived while the remaining exists in the wild. Consequently, these figures, indeed, has put Ethiopia as the leading honey and beeswax producer in Africa. In fact, Ethiopia has even bigger potential than the current honey production due to the availability of plenty apicultural resources such as natural forests with adequate apiculture flora, water resources and a high number of existing bee colonies. However, lack of well-trained man powers, lack of standardization, problems associated with honey bee pests and diseases, high price and limited availability of modern beekeeping equipment's for beekeepers and absconding and migration of bee colonies are some of the major constraints reported for beekeeping in Ethiopia. In this review, an attempt was made to present all beekeeping practices in Ethiopia. The opportunities and major constraints of the sector were also discussed.

What Quality Factors Affect to the e-Learning Performance (e-러닝 성과에 영향을 미치는 품질요인에 관한 연구)

  • Kim, Sung-Gyun;Sung, Hang-Nam;Jeong, Dae-Yul
    • The Journal of Information Systems
    • /
    • v.16 no.1
    • /
    • pp.201-230
    • /
    • 2007
  • Recently, the growth of e-Learning systems and its related information technology has presented a unique challenge for both schools and industry. It would make an extremely phenomenal paradigm shift in the educational method and practice. Methods of assessing the quality of e-teaming services and contents are critical issue in both practice and research. Moreover, many researchers are interested in what qualify factors more affect to the Performance of e-Learning service. Nevertheless, service quality is a construct that is difficult to define and measure. e-Learning services are composed of many factors, and they are more complicated than the traditional education services because they we performed on the distance basis and the many platforms of IT infrastructure. The purposes of our research are to classify the e-Learning service dimension and identify their factors, to develop the measurement of the factors, and finally to test empirically their relationship between the service factors and e-Learning service performance. For the development of the service factors we considered SERVQUAL model and SERVPERF model which were developed in the service marketing area. The SERVQUAL model was more fitted to the e-Learning services than the latter. From that we derived several factors that fit to our research domain, ie, tangibles, access, reliability, credibility, security, responsiveness, assurance, empathy. We combined three factors of them(reliability, credibility, security) into a factor, system stability for the semantic simplicity, and divided responsiveness factor into system operator responsiveness and teacher responsiveness as the entity based dimension classification. In the e-Learning services research, Most researcher are mentioned the quality factors of contents, so we added to two contents quality factors, ie, contents production method and richness of contents itself. We examined the relationship between the service quality factors and e-Learning performance(student satisfaction and service reuse intention). As result three quality factors(contents production method, teacher responsiveness, empathy) significantly affected student satisfaction. To the other performance variable, ie, service reuse intention, the teacher related quality factors(such as teacher responsiveness, assurance, empathy) affected only. In conclusion, even in the on-line distance teaming, the teacher's role md earnestness is as important as ever.

  • PDF

A Study on the Instructional Model for Middle School Free-Learning Semester Curriculum (중학교 자유학기 교과의 수업 모형 연구)

  • Kim, Pyoung Won
    • Korean Educational Research Journal
    • /
    • v.38 no.2
    • /
    • pp.81-108
    • /
    • 2017
  • The purpose of this study is to develop a standardized learning model for a free-learning semester, and to provide a practical framework of its curriculum. This paper is a state-funded study to design an instructional model for the free-learning semester. Instructional models that have been implemented in the practical school were constructed through collecting opinions from school teachers. The instructional model for a free-learning semester in this current study is a modification of the existing learning model into the Learning (Meaningful reception learning)-Practice-Production stage. These are designed to reflect the UNESCO proposals that emphasize knowledge, skills, and character, respectively. It is not easy to construct the instructional model for the free-learning semester activities. A three-step strategy that encompasses the UNESCO proposals will be a useful framework for teachers to systematically design and implement free-learning semester teaching.

  • PDF

FEEDING SYSTEM OF LARGE RUMINANTS IN RURAL BANGLADESH

  • Rahman, M.M.;Islam, M.R.;Rahman, M.M.;Zaman, M.A.;Malek, M.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.5 no.2
    • /
    • pp.349-355
    • /
    • 1992
  • In order to explore feeding practices of large ruminants and methods followed in the rural areas, an exploratory survey was made during the period from January 1988 to January 1989 in eight different agro-ecological areas of Bangladesh in relation to the existing seasons and farmers' categories. The study shows what feeding practices varied (p<0.01) from area to area and season to season but not with the farmers' category. Considering the overall picture of feeding practices existing in the country, it can be observed that bigger proportion of farmers practiced stall feeding and tethering ($38.4{\pm}35.1$) followed by stall fed ($34.3{\pm}35.2$) and grazing or tethering ($17.3{\pm}26.7$). The figure with wider deviations indicates that farmers in the rural areas did not follow a smooth feeding practice, the system is rather a complex, heterogenous and a mere consequence of existing land use system. The results of feeding methods of by-product concentrates indicate that it also varied (p<0.01) from area to area but however, not with seasons and farmers' category. It is observed that bigger proportion of farmers fed concentrates to their animals mixed with water ($74.1{\pm}30.3$) followed by mixed with roughage and water ($10.3{\pm}13.3$) or fed alone ($5.6{\pm}14.2$). The method like feeding practice is also complex and heterogenous in the rural areas of Bangladesh. Hence, it is needed to develop a strategic feeding system and method identifying the problems associated with those.

A Case Study to Estimate the Greenhouse-Gas Mitigation Potential on Rice Production System in Farming without Agricultural Chemicals

  • Lee, Jong-Sik;Ryu, Jong-Hee;Jeong, Hyun-Cheol;Choi, Eun-Jung;Kim, Gun-Yeob
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.47 no.5
    • /
    • pp.374-380
    • /
    • 2014
  • To estimate greenhouse gas (GHG) emission, the inventory of rice cultivation at the farming without agricultural chemicals was established from farmers in Gunsan, Jeonbuk province in 2011~2012. The objectives of this study were to calculate carbon footprint and analyse the major factor of GHGs. To do this, we carried out a sensitivity analysis using the analyzed main factors of GHGs and estimated the mitigation potential of GHGs. Also we suggested agricultural methods to reduce GHGs that can be appled by farmers at this region. At the farming system without agricultural chemicals, carbon footprint of rice production unit of 1 kg was 2.15 kg $CO_2.-eq.kg^{-1}$. Although the amount of carbon dioxide ($CO_2$) emission was the largest among GHGs, methane ($CH_4$) emission had the highest contribution to carbon footprint on rice production system when it was converted to carbon dioxide equivalent ($CO_2-eq.$) multiplied by the global warming potential (GWP). Main source of $CO_2$ emission in the rice farming system without agricultural chemicals was combustion of fossil fuels used by agricultural machinery. Most of the $CH_4$ was emitted during rice cultivation practice and its major emission factor was flooded paddy field in anaerobic condition. Also, most of the $N_2O$ was emitted from rice cultivation process. Major sources of the $N_2O$ emission was application of fertilizer such as compound fertilizer. As a result of sensitivity analysis in energy consumption, diesel had the highest sensitivity among the energy inputs. With the reduction of diesel consumption by 10%, it was estimated that $CO_2$ potential reduction was about 2.0%. With reducing application rate of compound fertilizer by 10%, the potential reduction was calculated that $CO_2$ and $N_2O$ could be reduced by 0.5% and 0.9%, respectively. At the condition of 10% reduction of silicate and compost, $CO_2$ and $CH_4$ could be reduced by 1.5% and 1.6%, respectively. With 8 days more drainage than the ordinary practice, $CH_4$ emission could be reduced by about 4.5%. Drainage and diesel consumption were the main sources having the largest effect on the GHG reduction at the farming system without agricultural chemicals. Based on the above results, we suggest that no-tillage and midsummer drainage could be a method to decrease GHG emissions from rice production system.

Flock composition, breeding strategies and farmers' traits of interest evaluation of Wollo highland sheep and their F1 crosses

  • Amare, Tadesse;Goshu, Gebeyehu;Tamir, Berhan
    • Journal of Animal Science and Technology
    • /
    • v.60 no.5
    • /
    • pp.14.1-14.12
    • /
    • 2018
  • Background: Sheep production is a major component of the livestock sector in Ethiopia. The country owing to the large population of 30.70 million estimated numbers of sheep in the country and out of which about 72.14% are females, and 27.86% are males with diverse genetic resources. The real value of indigenous breeds was often under-estimated mostly due to their poor appearance and relatively low productivity. Developing countries in most cases opt for exotic breeds to increase animal productivity through crossbreeding or breed substitution without properly investigating the production potential of the indigenous breeds. The main objective of the research was to identify sheep flock composition and structure, farmers' traits of interest and breeding objective of Wollo highland sheep, and their $F_1$ crossbreed progenies. Results: Smallholder farmers' flock synthesized from breeding ewes, breeding rams, pre-weaned ewe lambs, pre-weaned ram lambs, unproductive ewes, castrated and fattened rams, with the percentage coverage of 29.2, 13.3, 15.5, 16.5, 12.4, and 12.5%, respectively. The maximum number of flock size was 289.0 sheep per flock and higher in the third stratum. The off-take rate percentage of the three strata presented as 21.9% in 1st stratum, 12% in the 2nd stratum, and 16.4% in the 3rd stratum and higher off-take rate recorded in the first stratum. Sheep producer's traits of interest ranked by growth rate (first), body size (second) and marketing value was third rank. Communal breeding (random mating), village based controlled breeding, mixed type and private ram controlled breeding practice were comprised of 39.7, 61.7, 52 and 71.3%, respectively. The percentages of ewes per flock composition were presented as 36.5, 27.1 and 25.5%, respectively in the 3rd stratum, 2nd stratum and 3rd stratum in the order of their importance's. Conclusion: Genetic improvement practices at smallholder sheep producers situation was showing promising outcome with indigenous Washera $F_1$ crossbred lambs and which designated for weaning rate, body size, marketing age, age at first lambing, good temperament and large litter size in the order of their rank. The contemporary breeding practice tendency indicated that, reduced flock size to improve flock productivity via crossbreeding practices.

A Study on the direction of Media Literacy education based on the development of animation (애니메이션 제작을 통한 미디어 리터러시 교육 방향 연구)

  • Park, HeeHyeon
    • Journal of the Korea Convergence Society
    • /
    • v.8 no.2
    • /
    • pp.149-155
    • /
    • 2017
  • The purpose of this research was to develop the method of media literacy education program based on animation production for the 21 century student. A total of four stages of educational programs were constructed by linking the media literacy education goals and the animation production process through the previous research. First, Acquisition of animation production tools for enhancing media access capability. Second, Animation production practice stage for strengthening creative production capacity. Third, the development of critical understanding stage for presentation and discussion the results. Forth, social sharing stage to strengthen social communication capacity. For the practical application of the education program, it was produced as an educational model for Hanseo University animation summer camp, and was educated by 79 middle school students in Chungcheong province. Based on this research, students improve an analytical ability and help them become active participants by creating their own animations. In future, it will be needed a continuous research on the development of educational programs using various media.

A Study on Damage Detection of Production Riser (생산 라이저의 손상 탐지에 대한 연구)

  • Je, Hyun-Min;Park, Soo-Yong
    • Journal of Navigation and Port Research
    • /
    • v.39 no.3
    • /
    • pp.179-184
    • /
    • 2015
  • The purpose of this study is to provide appropriate methodology to ensure the safety and integrity of the production riser in offshore structure. In order to select integrity estimation methodology for production riser, level I and II Non-destructive Damage Evaluation (NDE) methods that were applied to existing structures are classified and reviewed. Numerical analysis is performed to verify the applicability and capability on damage detection of reviewed methods. As a result, the damage detection methodology using modal strain energy is more sensitive in detection of the damage than other methods. In practice, the number of sensors is limited due to the environmental and financial conditions. The impact on damage detection performance by reducing the number of sensors is systematically investigated through a series of numerical analyses and the results are discussed. The optimal number of sensor for the integrity estimation of production riser is recommended.