• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.144-149
• /
• 2017

This study empirically analyzes the effect of IT SME ventures' external information network diversity on their production period reduction and productivity improvement generated from technology development. This research constructs a mediating model based on the open innovation perspective and tests it with the 138 samples of South Korean IT SME ventures based on the ordinary least squares regression. This research is expected to make a good contribution by shedding a new light on the following three points about the critical role of IT SME ventures' external information network diversity in increasing their production period reduction and productivity improvement generated from technology development which has scarcely been illuminated in the extant studies in the field of the management of technology for SMEs. First, IT SME ventures' external information network diversity positively influences their production period reduction. Second, the external information network diversity positively influences IT SMEs' ventures' productivity improvement. Third, IT SME ventures' production period reduction partially mediates the influence of IT SME ventures' external network diversity on their productivity improvement. These three fresh points are expected to provide useful theoretical and practical implications. Related to the theoretical implication, this research provides a fresh implication that IT SME ventures' external information network diversity positively influences not only their production period reduction but also productivity improvement generated from technology development. Concerning the practical implication, this study suggests that the CEOs in IT SME ventures make strategic efforts to use more diverse external information sources in order to increase their production period reduction and productivity improvement generated from technology development.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.3
• /
• pp.248-256
• /
• 2011

The inherent efficiency of a ship would be prior to any other quality factors in ship's safety, because lack of it may give rise to a serious sea casuality even if it were a light mistake in operation. And the representative casualty comes from a deficiency of stability and an operating error combined would be capsizing. The Korean offshore large purseiner looks to have a structural weak point with small range of stability in spite of her big initial metacentric height, and have various type of roll reduction devices in order to cover up the defect. The aim of this study is to grasp for the roll reduction characteristics of the purseiner with bilge keel only and a stern keel additionally attached. The results are summarized as follows; The rolling angle of the model ship was increased in accordance with increase of the wave period and height, especially at close to the natural wave period of her, and the trends were more distinguished in the situation of bilge keel only installation than in the stern keel additionally installed. And stern keel has not noticeable effect on the reduction of the roll in the light ship condition, but has a little effect in full load condition.

• Environmental and Resource Economics Review
• /
• v.10 no.2
• /
• pp.135-159
• /
• 2001

This study analyses the energy consumption increase by using a physical production index (PPI) based decomposition method. The energy efficiency of the Korean industry deteriorated to a large extent in the 1992 to 1997 period. This outcome, however, does not contradict the result of a previous study that the physical energy intensities (measured by energy use per production unit) decreased in four Korean energy intensive industries such as steel, cement, petrochemical and pulp and paper in the same period. Although the physical energy intensities in four industries considered decreased significantly, the energy efficiency of the Korean industry deteriorated because the increase in the value-added production was smaller than that in the physical production except for the steel industry. This outcome suggests that the reduction in the physical energy intensity alone will not result in reducing the economic energy intensity, thereby reducing the increase in the energy consumption of the Korean industry. Therefore, it necessitates to restructure the Korean industry towards a higher value-added production and to strengthen energy efficiency improvement efforts in the Korean industry. As the overinvestment in the energy intensive industries caused a deep price fall of Korean products and a reduction of the value added of the Korean industry and with it an increase in the economic energy intensity, a decrease in this intensity will highly depend on reducing the overcapacity in the energy intensive industries which was partly responsible for the currency and economic crisis of 1997.

• IE interfaces
• /
• v.13 no.2
• /
• pp.217-224
• /
• 2000

This paper analyzes the effects of setup cost reduction in a dynamic lot-sizing model for a single-facility multi-product problem. In the model, demands for each product are known, no backlogging is allowed, and a single resource is employed. Also, setup cost is defined as a function of capital expenditure to invest in setup cost reduction. Furthermore, in each production period the facility (or plant) produces many products, each representing a fixed part of the involved production activity (or input resource quantity). In this paper, the structure of the optimal solution is characterized and an efficient algorithm is proposed for simultaneously determining the optimal lot size with reduced setup cost and the optimal investment in setup cost reduction. Also, the proposed algorithm is illustrated by a numerical example with a linear and an exponential setup reduction functions.

• Fisheries and Aquatic Sciences
• /
• v.18 no.3
• /
• pp.325-332
• /
• 2015

An active stimulating method for juvenile fishes to drive escaping from mesh of the codend was examined by shaking canvas in the bottom trawl followed by shrimp beam trawl. Field fishing trials by a bottom trawl were carried out between the Geomoondo and Jejudo in west of South sea, Korea by conver-net methods to examine the effect on the reduction of juvenile fish as a discard catch by generating a shaking movement of the codend using two pieces of asymmetrical semi-circular canvas. The mean period of the shaking motion with the round canvas was 10-15 s, and the range of amplitude as a vertical depth change was up to 0.4-0.6 m when towing speed 3.4-4.3 k't as estimated by peak event analysis. The escape rate of juvenile fish in conver-net by total juvenile bycatch (codend and cover-net) in 14 trials increased from 20% in a steady codend to 34% using a shaking codend in the bottom trawl, while the marketing catch or total bycatch was similar between steady and shaking cod ends. There was no difference in the body size of the fish and species composition between the steady and shaking cod ends. Above results demonstrate a new method for bycatch reduction actually up to 18% using an active stimulating device, although further experiments are needed to increase an effective shaking motion of the codend in amplitude and period for more bycatch reduction.

• Journal of Environmental Health Sciences
• /
• v.33 no.3
• /
• pp.190-194
• /
• 2007

Aflatoxin $B_1$ is a mycotoxin produced by Aspergillus flavus and A. parasiticus and is a human carcinogen. This study was performed to investigate reduction of growth and aflatoxin production of A. parasiticus by kimchi. A. parasiticus was grown in a modified APT broth with the juice of kimchi (at a concentration of 7%) at $28^{\circ}C$ for 9 days. Aflatoxin $B_1$ was determined by use of high performance liquid chromatography (HPLC). The addition of the juice of kimchi significantly reduced mycelial growth and aflatoxin production during the incubation period (p<0.05). Reduction of mycelial growth of A. parasiticus as the result of addition of the juice of kimchi was observed to range between 64.8 to 83.4% while reduction of aflatoxin production ranged from 62.2 to 73.0%. This study indicates that kimchi could be an effective inhibitor of aflatoxin production although mycelial growth may be permitted. More research is needed to study the inhibitory effects of the metabolites of kimchi.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.789-793
• /
• 2003

An investigation was conducted on 729 Hariana cows maintained at Government Livestock Farm, Hisar, from 1973 to 1999, with an objective to compare the efficiency of various selection indices for attaining desired genetic gains in the index traits. The various traits included were age at first calving (AFC), service period (SP), calving interval (CI), days to first service (DFS), number of services per conception (NSPC), lactation milk yield (LY), peak yield (PY), dry period (DP). Except for LY, PY and AFC the heritabilities of all other traits were low. Desirable associations among reproductive traits are supportive of the fact that any one of these traits incorporated in simultaneous selection is expected to cause correlated response in other traits. Production traits (LY and PY) were positively correlated, while DP had low negative genetic correlation with LY, and high genetic correlation with PY. Thus, DP can be taken as additional criteria in selection index for better over all improvement. Almost all production traits except DP had low negative correlation with AFC, SP, DFS and CI meaning that reduction in reproduction traits up to certain level may increase production performance. While, the correlation of NSPC with LY and PY was moderate positive. Among four trait indices I23: incorporating PY, AFC, SP and NSPC and among three trait indices I1: incorporating LY, AFC and SP were the best as these required least number of generations (4.87 and 1.35, respectively) to attain desired goals. Next in order of preference were PY or LY along with DP and SP as the best indices (I20 and I16) of which, index with PY may be preferred instead of LY as it produced considerably high correlated response in LY and reduction in NSPC as well.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.3
• /
• pp.287-291
• /
• 2000

The study was based on 1921 service period records of Nili Ravi buffaloes maintained at six dairy farms in Pakistan during the period 1978 to 1994. The mean service period was $237.57{\pm}4.5$ days in the over all data. The highest mean service period ($393.59{\pm}16.18$ days) was at MDF Rawalpindi and the lowest ($199.15{\pm}14.35$ days) was at MDF Peshawar. The difference was significant p<0.001. Late maturing buffaloes showed significantly longer service period as compared to early maturing buffaloes. Parity and seasonal effects on Service Period were studied. There was an overall trend of reduction in the length of service period with the increase in parity. The mean ($287.54{\pm}6.89$ days) service period was (highest) in parity number one and lowest in parity number eight ($107.95{\pm}19.72$ days). The difference was highly significant. In overall data significantly lower service periods were seen in buffaloes calving in spring+winter as compared to summer+fall.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.2
• /
• pp.185-192
• /
• 2014

The production type of foundry industry is a small quantity batch production methods that require the highly skilled technology in the global competition in the variety of customer needs and directly under the influence of fluctuations characteristic. Therefore suitability for small quantity batch production and flexible production capacity and price competitiveness is needed more than anything. To do this, we need transcription and comprehensive innovation activities to maximize the revenue structure of the organization and field survival foundation should be developed the TPI(Total Profit Innovation) process in all aspects of the organization and all employees are involved in order to create a cost, quality, time, and service part of the overall aim how to achieve those effects within a short period of time. We applied the TPI process for S company in the foundry business innovation and productivity through cost reduction. We will expect the productivity improvement and financial performance improvement and then continually accumulate and review the results.

• Journal of Korea Multimedia Society
• /
• v.21 no.8
• /
• pp.1021-1026
• /
• 2018

3D SCAN enables easy human body measurement via a digital method in the process of film costume production which used to be done manually. Software-oriented computer graphic, which integrates 3D SCAN data in the process of manual film costume production, can induce quick and diverse design outcomes. While, 3D PRINT, which integrates computer graphic data in the process of manual film costume production, can automate the process of special costume production using a digital method. Integration of 3D Scan + Computer Graphic + 3D Print using integrated platforms for tailored costume production as developed in this study allows significant reduction of costume production period and costs. It also allows efficient integration of costume production outcomes in various industries related with OSMU contents in particular. In other words, using it, we can create a new business market that integrates multiple areas of film content, drama content and game content.