• Asian-Australasian Journal of Animal Sciences
• /
• 제20권9호
• /
• pp.1367-1373
• /
• 2007

The aim of this study was to determine the feeding value to sheep of Acacia saligna grown under temperate conditions. Pen trials were undertaken to determine the effects of feeding A. saligna, which had been grown in a Mediterranean environment, on feed intake, nitrogen balance and rumen metabolism in sheep. Sheep were given ad libitum access to A. saligna with or without supplementation with PEG 4,000 or PEG 6,000. PEG 4000 appears to be the major detannification agent used in trials involving high tannin feed despite the fact that PEG 6000 has been shown to be more effective, in vitro. For this reason it was of interest to compare the two, in vivo. Dry matter intake was greater (p<0.05) in sheep supplemented with either PEG 4,000 or PEG 6,000 compared to the control. There was no difference, however, in intake between those supplemented with either PEG 4,000 or 6,000. Although animals were not weighed throughout the trial, a loss in body condition was obvious, in particular in the control group. Intake of N was greater (p<0.05) in sheep supplemented with either PEG 4,000 or PEG 6,000 than in the control. There was no difference in N intake between those supplemented with either PEG 4,000 or PEG 6,000. There were no significant differences in either the faecal or urinary N output between any of the treatment groups and all treatment groups were in negative N balance. Neither the average nor maximum pH of ruminal fluid of the control group was different to those supplemented with PEG. The minimum pH for the control group, however, was significantly higher (p<0.05) than for either of the PEG treatments. The average and the maximum ammonia levels were lower (p<0.05) in the control group compared with those in either of the PEG treatment groups. For all dietary treatments ruminal ammonia levels were well below the threshold for maximal microbial growth. Feeding A. saligna, without PEG, had a definite defaunating effect on the rumen. For all dietary treatments ruminal ammonia levels were well below the threshold for maximal microbial growth. It was concluded that A. saligna was inadequate as the sole source of nutrients for sheep, even with the addition of PEG 4,000 or PEG 6,000. The anti-nutritional effects on the animals were largely attributed to the excessive biological activity of the phenolics in the A. saligna leaves. There is a need to determine other supplements that may be complimentary with PEG to enhance the nutritive value of A. saligna to maintain a minimum of animal maintenance.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2010년도 정기총회 및 춘계학술발표회
• /
• pp.17-17
• /
• 2010

Ethylene, known as a stress hormone regulate wide developmental processes including germination, root hair initiation, root and shoot primordial formation and elongation, leaf and flower senescence and abscission, fruit ripening. The acceleration of ethylene biosynthesis in plant associated with environmental and biological stresses. 1-Aminocycloprophane-1-carboxlyate deaminase(ACCD) is an enzyme that cleaves ACC into and ammonia, a precursor of the plant hormone ethylene. Plant growth-promoting rhizobacteria (PGPR) having ACCD can decrease endogenous ACC level of tissue, resulting in reduced production of ethylene in plants. ACC deaminse was a key enzyme for protect stressed plants from injurious effects of ethylene. ACCD gene was encoded from Pseudomonas flourescens, PGPR and was cloned in Escherichia coli. We expressed the recombinant ACCD(rACCD) containing 357 amino acids with molecular weight 39 kDa that revealed by SDS-PAGE and western blot. The rACCD was purified by Ni-NTA purification system. The active form of rACCD having enzyme activity converted ACC to a-ketobutyrate. The optimal pH for ACC deaminase activity was pH 8.5, but no activity below pH 7.0 and a less severe tapering activity at base condition resulting in loss of activity at over pH 11. The optimal temperature of the enzyme was $30^{\circ}$ and a slightly less severe tapering activity at 15 - 30$^{\circ}$, but no activity over $35^{\circ}$. P. flourescens ACC deaminase has a highly conserved residue that plays in allowing substrate accessibility to the active sites. The enzymatic properties of this rACCD will provide an important reference for analysis of newly isolated ACCD and identification of newly isolated PGPR containing ACCD.

• Nuclear Engineering and Technology
• /
• 제47권4호
• /
• pp.479-487
• /
• 2015

The thallium-doped sodium iodide [NaI(Tl)] scintillation detector is preferred as a gamma spectrometer in many fields because of its general advantages. A silicon photomultiplier (SiPM) has recently been developed and its application area has been expanded as an alternative to photomultiplier tubes (PMTs). It has merits such as a low operating voltage, compact size, cheap production cost, and magnetic resonance compatibility. In this study, an array of SiPMs is used to develop an NaI(Tl) gamma spectrometer. To maintain detection efficiency, a commercial NaI(Tl) $2^{\prime}{\times}2^{\prime}$ scintillator is used, and a light guide is used for the transport and collection of generated photons from the scintillator to the SiPMs without loss. The test light guides were fabricated with polymethyl methacrylate and reflective materials. The gamma spectrometer systems were set up and included light guides. Through a series of measurements, the characteristics of the light guides and the proposed gamma spectrometer were evaluated. Simulation of the light collection was accomplished using the DETECT 97 code (A. Levin, E. Hoskinson, and C. Moison, University of Michigan, USA) to analyze the measurement results. The system, which included SiPMs and the light guide, achieved 14.11% full width at half maximum energy resolution at 662 keV.

• 한국환경농학회지
• /
• 제28권3호
• /
• pp.233-237
• /
• 2009

It has widely been observed that the effect of elevating atmospheric $CO_2$ concentrations on rice productivity depends largely on soil N availabilities. However, the responses of ammonia volatilization from flooded paddy soil that is an important pathway of N loss and thus affecting fertilizer N availability to concomitant increases in atmospheric $CO_2$ and temperature has rarely been studied. In this paper, we first report the interactive effect of elevated $CO_2$ and temperature on ammonia volatilization from rice paddy soils applied with urea. Urea labeled with $^{15}N$ was used to quantitatively estimate the contribution of applied urea-N to total ammonia volatilization. This study was conducted using Temperature Gradient Chambers (TGCs) with two $CO_2$ levels [ambient $CO_2$ (AC), 383 ppmv and elevated $CO_2$ (EC), 645 ppmv] as whole-plot treatment (main treatment) and two temperature levels [ambient temperature (AT), $25.7^{\circ}C$ and elevated temperature (ET), $27.8^{\circ}C$] as split-plot treatments (sub-treatment) with triplicates. Elevated temperature increased ammonia volatilization probably due to a shift of chemical equilibrium toward $NH_3$ production via enhanced hydrolysis of urea to $NH_3$ of which rate is dependent on temperature. Meanwhile, elevated $CO_2$ decreased ammonia volatilization and that could be attributed to increased rhizosphere biomass that assimilates $NH_4^+$ otherwise being lost via volatilization. Such opposite effects of elevated temperature and $CO_2$ resulted in the accumulated amount of ammonia volatilization in the order of ACET>ACAT>ECET>ECAT. The pattern of ammonia volatilization from applied urea-$^{15}N$ as affected by treatments was very similar to that of total ammonia volatilization. Our results suggest that elevated $CO_2$ has the potential to decrease ammonia volatilization from paddy soils applied with urea, but the effect could partially be offset when air temperature rises concomitantly.

• 에너지공학
• /
• 제25권4호
• /
• pp.251-258
• /
• 2016

연료전지는 전기를 발전하면서 동시에 열도 생산하며, 본 고는 이 두 가지를 함께 이용하는 가정용의 마이크로 연료전지-열병합발전(${\mu}FC$-CHP) 시스템에 관한 조사보고서이다. 열병합발전 시스템을 구성하는 몇 가지 방안 중에서 연료전지는 전기와 열 효율을 합쳐 90%가 넘는 가장 높은 에너지 효율을 갖는 시스템을 구현할 수 있어 유용성이 높다. 연료전지에는 크게 다섯 가지 종류가 있으며, 이 중 가정용 ${\mu}FC$-CHP로 적합한 것은 프로톤교환 막연료전지(PEMFC)와 고체산화물연료전지(SOFC)이다. ${\mu}FC$-CHP시스템은 독립전원으로서 송배전 손실을 줄일 수 있고 전기생산단가를 낮출 수 있으며, 오염물질을 배출하지 않는 친환경 기술이란 점 등의 장점이 많다. 단점은 초기 투자비용이 높다는 점인데, 기술의 발달로 제작 단가를 줄여 이를 해결해나가고 있다. 현재는 일본이 시장을 선점하고 있으나 우리나라도 100만대 보급 계획을 가지고 있고, 정부가 반 정도의 설치보조금을 제공하여 시장을 견인하고 있다. 본 고에서는 이와 함께 연료전지와 열병합발전을 연결하는 기술적 내용 및 각국의 동향을 기술한다.

• 한국가금학회지
• /
• 제41권4호
• /
• pp.305-311
• /
• 2014

복제수변이(Copy number variation, CNV)는 DNA 다양한 구조적 변화의 한 형태이다. 복제수변이는 인간의 질병 및 농업의 생산성에 영향을 미치는 것으로 알려져 있다. 이전 우리나라의 닭의 품종은 유럽에서 유입되어진 품종을 기반으로 구축되어져 있었다. 따라서 농촌진흥청 국립축산과학원에서는 20년 동안 재래품종을 복원하려고 노력하였고, 5품종 12계통으로 복원하였다. 최근 염기서열분석 기술의 발달로, 해상도가 좋은 게놈 전체의 복제수변이를 발굴할 수 있게 되었다. 그러나 한국 재래닭 품종에 대해서는 체계적인 연구가 이루어지지 않고 있다. 본 연구에서는 한국 재래 닭(계통 L)에 대해서 게놈 전체의 염기서열을 분석하고 닭의 참고서열과 비교하여 재래닭에서 확인된 복제수 변이를 보고하였다. 닭의 28개 염색체에서 총 501개의 복제수 변이를 확인하였고, 이를 Gain과 Loss로 나누어서 표시하였다. 또한 우리는 501개의 복제수 변이를 포함하고 있는 유전자의 기능을 분류하였다. 그 결과, 전사 및 유전자 조절에 관련된 유전자들이 많이 분류되었다. 본 연구의 결과는 복제수 변이와 한국 재래닭의 경제형질 간의 연관성을 설명할 수 있는 기초자료로 활용될 것으로 사료된다.

• 한국유기농업학회지
• /
• 제13권1호
• /
• pp.85-99
• /
• 2005

This trial was carried out to determine effects of organic feeds in comparison to conventional diet on feed intake, digestibility, and nitrogen retention in Korean native goats. Twelve Korean native goats were allotted to treatments in four groups of three goats and then they were housed in separate metabolism cages for 21 days. Treatments included conventional diet (A) as a control group and three organic feed groups (B: organic rice straw, C: organic nee leaves, D: organic mixture of rice straw and tree leaves). The A treatment, conventional diet, consisted of common rice straw and commercial concentrates at a proportion of 60 and 40%, respectively. All ingredients of organic feeds treatments were organically produced-agricultural products without any application of chemical fertilizer and pesticide. Four experimental diets were formulated to have the same ratio of forage to concentrate and similar contents for protein and carbohydrate across treatments and they were offered to goats ad libitum. Feed intake, apparent nutrient digestibility and nitrogen retention were investigated. For chemical compositions of experimental diets, all nutrients except crude ash and ether extract were not significantly different across treatments as we expected. Crude ash content was highest in the A treatment (P<0.05), however, it was not significantly different among organic feeds treatments. Ether extract content was higher (P<0.05) in C and D treatments than in A and B. Even if dry matter intakes for organic feeds treatments were not significantly different among them, they were significantly higher (P<0.05) compared with conventional diet. Fecal excreta were not significantly different across treatments, resulting in significantly higher digestible dry matter (g/day) in treatments of organic feeds (P<0.01). Average daily gain (ADG) and feed efficiency (FE) were more increased (P<0.01) in treatments of organic feeds compared with conventional diet. Digestibilities for most of nutrients except NFC had the same trend as ADG and FE, however, NFC digestibilities for C and D treatments were significantly lower (P<0.01) than those of A and B. Nitrogen intakes for organic feeds treatments were significantly higher (P<0.001) than conventional diet, with no difference among organic feeds treatments. Fecal nitrogen loss was higher (P<0.05) for C and D treatments than for A and B. Retained nitrogen contents were significantly higher (P<0.05) for organic feeds treatments than for conventional diet, but nitrogen retention rate did not show any difference across treatments. The results showed that organic feed supplementation more improved feed intake, digestibility and nitrogen retention in comparison with conventional diet, and thus they could be concluded that organic feeds might contribute to animal performance and a safer production of animal product.

• 한국유기농업학회지
• /
• 제25권4호
• /
• pp.917-930
• /
• 2017

This study was conducted to evaluate Raphanus sativus extracts to methane reduction in rumen. Five different levels of R. sativus extracts were used to investigate the most effective dosing level for the decrease of methane production in the rumen. The rumen fluid was collected from a cannulated one Hanwoo cow ($BW=450{\pm}30kg$) consuming 600 g/kg timothy and 400 g/kg concentrate. On fermentation day, rumen fluid was collected at 2 hr postfeeding R. sativus extracts was dosed to achieve final concentration of 0, 1, 3, 5, 7, and 9% respectively, to fermentation bottles containing the mixture of rumen fluid and McDougall's buffer and 300 mg of timothy was added as a substrate. The fermentation was conducted for 3, 6, 9, 12, 24, 48 and 72 hr incubation time at $39^{\circ}C$ with shaking. In vitro ruminal pH values were measured normal range for ruminal fermentation. Dry matter disappearance was significantly higher (p<0.05) at 3 hr incubation time 1, 3 and 5% doses than that of control. The highest methane reduction was observed in 12 hr incubation time 5, 7 and 9%. The carbon dioxide emission was also significantly (p<0.05) lower than that of control at 12 hr incubation time 5, 7 and 9%. The total volatile fatty acid was no significant difference between control and all doses level at 12 and 24 hr incubation time. At 24 hr incubation time, the result of real-time PCR were indicated that M. archea was significantly lower (p<0.05) at all doses level comparing to that of control. In conclusion, R. sativus extracts were significantly decreased methane emission. R. sativus extracts were significantly lower (p<0.05) than that of control at 12 hr incubation time 5, 7 and 9% and no adversely effect in rumen pH, dry matter disappearance and total VFA.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.51-51
• /
• 2010

Recently just as in the automobile industry, shipbuilders also try to reduce material consumption and weight in order to keep operating costs as low as possible and improve the speed of production. Naturally industry is ever searching for welding techniques offering higher power, higher productivity and a better quality. Therefore it is important to have a details research based on the various welding process applied to steel and other materials, and to have the ability both to counsel interested companies and to evaluate the feasibility of implementation of this process. Submerged-arc welding (SAW) process is usually used about 20% of shipbuilding. Similar to gas metal arc welding(GMAW), SAW involves formation of an arc between a continuously-fed bare wire electrode and the work-piece. The process uses a flux to generate protective gases and slag, and to add alloying elements to the weld pool and a shielding gas is not required. Prior to welding, a thin layer of flux powder is placed on the work-piece surface. The arc moves along the joint line and as it does so, excess flux is recycled via a hopper. Remaining fused slag layers can be easily removed after welding. As the arc is completely covered by the flux layer, heat loss is extremely low. This produces a thermal efficiency as high as 60% (compared with 25% for manual metal arc). SAW process offers many advantages compared to conventional CO2 welding process. The main advantages of SAW are higher welding speed, facility of workers, less deformation and better than bead shape & strength of welded joint because there is no visible arc light, welding is spatter-free, fully-mechanized or automatic process, high travel speed, and depth of penetration and chemical composition of the deposited weld metal. However it is difficult to application of thin plate according to high heat input. So this paper has been focused on application of the field according to SAW process for thin plate in ship-structures. For this purpose, It has been decided to optimized welding condition by experiments, relationship between welding parameters and bead shapes, mechanical test such as tensile and bending. Also finite element(FE) based numerical comparison of thermal history and welding residual stress in A-grade 3.2 thickness steel of SAW been made in this study. From the result of this study, It makes substantial saving of time and manufacturing cost and raises the quality of product.

• 한국물환경학회지
• /
• 제25권3호
• /
• pp.441-451
• /
• 2009

To evaluate the soil erosion best management practices, many computer models has been utilized over the years. Among those, the USLE and SWAT models have been widely used. These models estimate the soil erosion from the field using empirically-based USLE/MULSE in it. However, these models are not good enough to estimate soil erosion from highland agricultural watershed where severe storm events are causing soil erosion and muddy water issues at the receiving watersheds. Thus, physically-based WEPP watershed version was applied to a watershed, located at Jawoon-ri, Gangwon with very detailed rainfall data, rather than daily rainfall data. Then it was validated with measured sediment data collected at the sediment settling ponds and through overland flow. In this study, very detailed rainfall data, crop management data, soil data reflecting soil reconditioned for higher crop production were used in the WEPP runs. The $R^2$ and the EI for runoff comparisons were 0.88 and 0.91, respectively. For sediment comparisons, the $R^2$ and the EI values were 0.95 and 0.91. Since the WEPP provides higher accuracies in predicting runoff and sediment yield from the study watershed, various slope scenarios (2%, 3%, 5.5%, 8%, 10%, 13%, 15%, 18%, 20%, 23%, 25%, 28%, 30%) were made and simulated sediment yield values were analyzed to develop appropriate soil erosion management practices. It was found that soil erosion increase linearly with increase in slope of the field in the watershed. However, the soil erosion increases dramatically with the slope of 20% or greater. Therefore special care should be taken for the agricultural field with slope greater than 20%. As shown in this study, the WEPP watershed version is suitable model to predict soil erosion where torrential rainfall events are causing significant amount of soil loss from the field and it can also be used to develop site-specific best management practices.