• Journal of the military operations research society of Korea
• /
• v.36 no.2
• /
• pp.1-10
• /
• 2010

Learning rate is generally applied to estimate an appropriate production labor cost. Learning effect is obtained from repetitive work during the production period under 3 assumptions ; homogeneous production, same producer, quantity measure in continuous unit. However, production breaks occur frequently in Korean defense industry environment because of budget constraint and annual requirements. In this case previous learning effect can not be applied due to learning loss. This paper proposed the application of learning rate when a production break occurs in Korea defense industry. To obtain a learning loss, we surveyed various learning loss factors for different production breaks(6, 12, 18 months) from 4 defense industry companies. Then, we estimate the first unit labor hours in re-production phase after production break using Anderlohr method and Retrograde method with the result of the survey. This work is the first attempt to show a method which defines and evaluates the learning loss factors in Korean defense industry environment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.37-42
• /
• 2008

Defects of corrugated board were limiting factors to the corrugated industry's growth. On-line detecting systems of defects are beneficial to increase profits of the corrugated board companies by reducing base paper consumption, increasing process reliability, and increasing productivity. By replacing naked eye inspection of defects to a defects detecting system, continuous inspection without fatigue may guarantee final products quality. The system was developed, which was consisted of line scan CCD camera, lens, illuminating parts, high speed image processor, software, various input parts, and output parts. First installation location of the system was at before fluting process after base paper unwinding, and surface of liner board was inspected by the system. Second installation location was after fluting process and combining process for liner board. Production loss includes ragged appearance of edge, irregular flute shape, wrong combination of flute, score cracking, defects in base paper, and flute cracking. The production loss was analyzed before and after the system installation at a commercial domestic mill. The production loss ratio was defined as a production loss weight per total production weight. The production loss ratio before the installation was decreased a lot from 1.28%(during 3 months before installation) to 0.76%(during 12 months after the first installation) and to 0.25%(during 6 months after the second installation).

• The Journal of Fisheries Business Administration
• /
• v.44 no.1
• /
• pp.15-24
• /
• 2013

Recently the Korean court accepts two typies of fisheries damages caused by oil pollution.. One is the direct loss of fisheries production originated from pollution of oil spillover. The other is the indirect loss of fisheries production originated from governmental measure of restricting fishing activities because of safety of marine product of oil spillover areas. The paper tries to suggest the appropriated measure of oil pollution damages of hanging and floating netcage aquaculture fisheries using the court judgement for responsibility restriction on Herbei Spirit Case. The paper tries to compare the damge estimation method of floating netcage aquaculture fisheries with that of natural aquaculture fisheries using conventional theory of the population biology of living resources characterized with age distribution.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.183-189
• /
• 2009

Environmental conditions may cause the quality change of fruits during distribution after harvest. In order to prevent the damage or quality change of fruits for distribution, the characteristic of fruits affected by the environmental conditions such as temperature, humidity under various distribution conditions should be known. This research was performed to analyze how the environmental conditions affect the factors such as weight loss rate and ethylene production of the peach under several distribution conditions. Environmental conditions of the actual distributed route were evaluated and the data obtained from the conditions were used for the simulated environmental tests. Regression models of the weight loss rate and the ethylene production of peach were developed and used in predicting peach quality. The weight loss rate of the peach estimated by the ASHRAE data was shown the higher value on the transportation temperature condition than on the low and room temperature conditions. The weight loss rate and the ethylene production of the peach on the simulated distribution conditions were measured and the measured weight loss rate of peach was the smaller than the theoretically estimated one. The regression models of the weight loss rate and the ethylene production were developed respectively.

• Journal of the Korean Geographical Society
• /
• v.50 no.2
• /
• pp.165-183
• /
• 2015

It is well known that, since the 15th century, the amount of soil loss in our country due to change in land use by human has increased more rapidly than ever before. However we cannot answer the question 'How long can the soil persist under the current rates of soil loss?', because it was difficult to quantify the soil production rate. With the advancement of accelerated mass spectrometry, the attempt to quantify rate of soil production and derive soil production function succeeded, and recently it was also applied into the Daegwanryeong Plateau. Here we introduce the principles for quantifying soil production and deriving soil production function using terrestrial cosmogenic nuclides, and then compare the soil production rates from the plateau with soil loss data after the late 20th century, and finally estimate how long the soil can persist. Averaged soil production rate since the Holocene derived from the plateau is revealed as ${\sim}0.05[mm\;yr^{-1}]$, and, however, the recent soil loss rate of intensively used farmlands at the same region is up to sixty times greater than the soil production rate. Thus, if current land use system is maintained, top soils on the cultivated lands over hillslopes especially in upland areas are expected to disappear within several decades at the earliest.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.629-634
• /
• 1992

Seventeen Japanese Black steers were used to evaluate the influence of slaughter weight (550 kg, 600 kg or 650 kg), sire (two sires), concentrate feeding (barley or corn) and muscle (six muscles) on the following characteristics: pH value, cooking loss, shear value, moisture and crude fat contents. Crude fat contents were higher, and moisture content and shear values were lower in muscles from the large slaughter weight group 650 kg than those from other slaughter weight groups. Cooking loss, shear value, moisture and crude fat contents differed between sires. Corn feeding increased crude fat content in muscle compared to barley feeding. Muscles containing a large amount of intramuscular fat showed lower shear values and less cooking loss than those containing a small amount of intramuscular fat.

• ALGAE
• /
• v.35 no.3
• /
• pp.237-252
• /
• 2020

Temperate rocky reefs dominated by the giant kelp, Macrocystis pyrifera, support diverse assemblages of benthic macroalgae that provide a suite of ecosystem services, including high rates of primary production in aquatic ecosystems. These forests and the benthic macroalgae that inhabit them are facing both short-term losses and long-term declines throughout much of their range in the eastern Pacific Ocean. Here, we quantified patterns of benthic macroalgal biomass and irradiance on rocky reefs that had intact kelp forests and nearby reefs where the benthic macroalgae had been lost due to deforestation at three sites along the California, USA and Baja California, MEX coasts during the springs and summers of 2017 and 2018. We then modeled how the loss of macroalgae from these reefs impacted net benthic productivity using species-specific, mass-dependent rates of photosynthesis and respiration that we measured in the laboratory. Our results show that the macroalgal assemblages at these sites were dominated by a few species of stipitate kelps and fleshy red algae whose relative abundances were spatially and temporally variable, and which exhibited variable rates of photosynthesis and respiration. Together, our model estimates that the dominant macroalgae on these reefs contribute 15 to 4,300 mg C m^-2 d^-1 to net benthic primary production, and that this is driven primarily by a few dominant taxa that have large biomasses and high rates of photosynthesis and / or respiration. Consequently, we propose that the loss of these macroalgae results in the loss of an important contribution to primary production and overall ecosystem function.

• Industrial Engineering and Management Systems
• /
• v.8 no.3
• /
• pp.131-138
• /
• 2009

The variable sampling inspection scheme with screening for the purpose of assuring the upper limit of maximum expected surplus loss after inspection has been proposed. In this inspection scheme, it has been assumed that a product lot consists of products manufactured through a single production line and lot quality characteristics follow a normal distribution. In the previous literature with respect to inspection schemes, it has been commonly assumed that lot quality characteristics obey a single normal distribution under the condition that all products are manufactured in the same condition. On the other hand, the production line is designed in order that the workload of respective processes becomes uniform from the viewpoint of line balancing. One of the solutions for the bottleneck process is to arrange the workshops in parallel. The lot quality characteristics from such a production line with the process consisting of some parallel workshops might not follow strictly the single normal distribution. Therefore, we expand an applicable scope of the above mentioned variable sampling inspection scheme with screening in this article. Concretely, we consider the variable sampling inspection with screening for the purpose of assuring the upper limit of average outgoing surplus quality loss in the production lots when the lot quality follows the mixed normal distribution.

• The Korean Journal of Ecology
• /
• v.12 no.1
• /
• pp.9-20
• /
• 1989

Annual production and decomposition of litter were studied in piuns rigida platation in Mt. Kwan-ak. The peak time of litter production was October-November. The litterfalll at that time was 54% of annual litter production. But the peak time of litterfall of reproductive parts was Junejuly. The peak times of litter production in Alnus hirsuta plantation were June-July, and November. It is thought that difference of seasonal distribution of letterfall between two forest types were assigned to litter falling factors such as temperature and insects. Total amount of letter loss increased according to time. Particulary, the peak time of loss rate was July-August. It was shown that the protein and phosphorus were accumulated in the letter for an experimental period. The amount of crude protein increased to 150% of initial amount. The amount of potassium was increased by August and then decreased rapidly. The contents of crude fat, holocellulose, lignin, and Na were decreased slowly. The loss of holocellulose was the largiest among them. Calcium was in steady state. It was thought that this variation pattern was assigned to leaching of soluble parts by high temperature, rainfall and growth rate of microorganisms.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.1
• /
• pp.45-50
• /
• 2021

Machines and facilities are physically or chemically degenerated by continuous usage. The representative type of the degeneration is the wearing of tools, which results in the process mean shift. According to the increasing wear level, non-conforming products cost and quality loss cost are increasing simultaneously. Therefore, a preventive maintenance is necessary at some point. The problem of determining the maintenance period (or wear limit) which minimizes the total cost is called the 'process mean shift problem'. The total cost includes three items: maintenance cost (or adjustment cost), non-conforming cost due to the non-conforming products, and quality loss cost due to the difference between the process target value and the product characteristic value among the conforming products. In this study, we set the production volume as a decreasing function rather than a constant. Also we treat the process variance as a function to the increasing wear rather than a constant. To the quality loss function, we adopted the Cpm+, which is the left and right asymmetric process capability index based on the process target value. These can more reflect the production site. In this study, we presented a more extensive maintenance model compared to previous studies, by integrating the items mentioned above. The objective equation of this model is the total cost per unit wear. The determining variables are the wear limit and the initial process setting position that minimize the objective equation.