• Korean Journal of Applied Biomechanics
• /
• v.30 no.2
• /
• pp.185-195
• /
• 2020

Objective: The purpose of this study was to identify recent domestic and international research trends regarding shoes carried out in biomechanics field and to suggest the direction of shoe research later. Method: To achieve this goal of research, the Web of Science, Scopus, PubMed, Korea Education and Research Information Service and Korean Citation Index were searched to identify trends in 64 domestic and international research. Also, classified into the interaction of the human body, usability evaluation of functional shoes, smart shoe development research, and suggested the following are the suggestions for future research directions. Conclusion: A study for the coordination of muscle activity, control of motion and prevention of injury should be sought by developing shoes of eco-friendly materials, and scientific evidence such as physical aspects, materials, floor shapes and friction should be supported. Second, a study on elite athletes in various sports is needed based on functional shoes using new materials to improve their performance along with cooperation in muscle activities and prevention of injury. Third, various information and energy production are possible in real time through human behavioral information, and the application of Human Machine Interface (HMI) technology through shoe-sensor-human interaction should be explored.

• Korean journal of food and cookery science
• /
• v.24 no.5
• /
• pp.652-664
• /
• 2008

In this study, a Hazard Analysis Critical Control Point (HACCP) plan was developed for the sanitary mass production of commercial Korean rice cake products (Gaepidduk, Injulmi, and Julpyon). The microbiological properties of manufacturing flow were evaluated in order to develop the HACCP Plan. The moisture contents of the rice cakes ranged between 36.2${\sim}$55.3%, whereas the water activity of all samples ranged between 0.954${\sim}$1.0. Microorganisms testing was conducted during various phases of the product flow of Korean rice cake preparation, and included assessments of food equipment, work environment, and cooking employees on a small scale. During the manufacture of Injulmi, Julpyon and Gaepidduk, CCPs were purchasing & storage, steaming and cooling, molding, and holding in the A and B manufactories. At the critical limit of CCPs, storage was conducted below at $5^{\circ}C$ in soybean powder, oil, and paste with redbeans. The steaming process was conducted above at $99^{\circ}C$ for 40 min. Cooling and holding processes were conducted for 2 hours below at $15^{\circ}C$. The molding process included sanitary education for foodhandlers and training for operators. Thus, certain prerequisite programs had to be implemented prior to the implementation of the HACCP system. High levels of bacterial contamination were detected in the aprons worn to work by some employees. Additionally, periodic sanitary education for foodhandlers and training for operators or managers was required. Cross contamination by materials was expected at the place where materials were processed or stored.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.113-117
• /
• 1993

Good yield synthetic routes for the production of new B-alkyl-dithiaborane clusters are reported. The syntheses of the B-alkyl-dithiaboranes are based on the use of Fischer-type carbene reagents to activate the B-H bonds of dithiaborane for alkyl-addition reactions and are the first examples of transition-mediated reactions of dithiaborane to be reported. Thus, reactions employing arachno-$S_2B_7H_8$- and $(CO)_5M{C(R_1)R_2}$ (M = Cr, W; $R_1 = CH_3,\;C_6H_5;\; R_2 = OCH_3,\;SC_6H_5)$ were found to yield the intermidiate anions I, $[(CO)_5M{C(R_1)R_2S_2B_7H_8}]^-$, which upon protonation gave the corresponding neutral, air-sensitive cluster arachno-4-$RCH_2-6,8-S_2B_7H_8(R=CH_3,\;IIa;\;C_6H_5,\;IIb)$ range from 30 to 35% yield. Complexes IIa and IIb are isoelectronic with arachno-6,8-$S_2B_7H_9$ and, on the basis of the spectroscopic data, are proposed to adopt a similar arachno cage geometry in which an $RCH_2$ units are substituted to 4 position boron atom of the arachno-6,8-$S_2B_7H_9$.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1998

Transportation provides an infrastructure vital to economic growth, and it is also an integral part of production. As a port is regarded as the interface between the maritime transport and domestic transport sectors, it certainly play a key role in any economic development. Ship's delay caused by port congestion has recently has recently attracted attended with the analysis of overall operation in port. In order to analyse complicated port operation which contains large number of variable factors, queueing theory is needed to be adopted, which is applicable to a large scale transportation system in chiding ship's delay in Inchon port in relation to ship's delay problem. The overall findings are as follows ; 1. The stucture of queueing model in this port can be represented as a complex of multi-channel single-phase 2. Ship's arrival and service pattern were Poisson Input Erlangian Service. 3. The suitable formula to calculate the mean delay in this port, namely, $W_q={\frac{{\rho}}{{\lambda}(1-{\rho})}}{\frac{e{\small{N}}({\rho}{\cdot}N)}{D_{N-1}({\rho}{\cdot}N)}}$ Where, ${\lambda}$ : mean arrival rate ${\mu}$ : mean servicing rate N : number of servicing channel ${\rho}$ : utilization rate (l/Nm) $e{\small{N}}$ : the Poisson function $D_{(n-1)}$ : a function of the cumulative Poisson function 4. The utility rate is 95.0 percents in general piers, 75.39 percents in container piers, and watiting time 28.43 hours in general piers, 13.67 hours in container piers, and the length of queue is 6.17 ships in general piers, 0.93 ships in container piers, and the ship turnaround time is 107.03 hours in general piers, 51.93 hours in container piers.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.4
• /
• pp.602-608
• /
• 2012

This study was conducted to evaluate the effect of commercial extruded pellet (EP) diet on the growth and water quality compared with a raw fish moist pellet (MP) diet for flounder on field feeding experiments. Three replicate groups of 130 fish per each tank (initial weight of 380 g) were fed one of the EP and Moist pellet (MP) for 7 months. In field feeding experiment, no significant difference was observed in final mean weight of fish fed the experimental EP (1,233 g) and MP (1,237 g), and any noticeable problem caused by feeding the experimental EP was not found during the whole period of feeding trial. Feed efficiency of fish fed the experimental EP was higher than that of MP, and there was no significant difference in survival between the fish fed experimental EP and MP. The concentrations of SS, COD, TN and TP of seawater in tanks of MP groups were 1-5 times higher than those of EP groups. Therefore, these results strongly suggest that diet EP could be developed to replace MP diet for the marketable size of production for flounder without adverse effects on growth performance and water quality.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.6
• /
• pp.1402-1411
• /
• 2014

This study about morphological observation of pre- or post ovulated eggs obtained from artificially maturated female eels. Female eels were divided with two groups as wild eels from nature and feminized eels from farm. Artificial maturation had been conducted with the established methods in this laboratory, and then maturate eggs sampled at fixed 3 times and these were observed with stereomicroscope. Rate of increased body weight (RIW) were measured with 2 times. Egg diameters and development of oil droplets are determined for standardization of egg maturation degree, and the transparency of egg cytoplasm and the homogeneous degrees of egg size were referred to determine of egg quality. Rate of increased body weight (RIW) were good in range about 10 % at final salmon pituitary extracts (SPE) injection time and in range about 20 % at $17{\alpha}$, $20{\beta}$-dihydroxy-4-pregnen-3-one (DHP) injection time. Good matured egg for fertilization had $900-1000{\mu}m$ diameter, and they had about 50 oil droplets in size about $100{\mu}m$ diameter. There were not predominant differences at egg size and oil droplet development between wild female and feminized eels.

• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.634-644
• /
• 2021

This study aims to propose various ways to utilize CLO, which focuses mainly on the production of 3D virtual samples, by comparing it with the pattern drafting functions of Four apparel CAD experts, who have teaching experience in YUKA and CLO, participated in a focus group interview, and a basic bodice prototype drafting was carried out by each participant to evaluate the pattern drafting functions of YUKA and CLO. The result of this study showed that the pattern drafting tools of YUKA are subdivided since YUKA is a CAD tool inherently specialized in pattern making. Though CLO provided a relatively limited pattern drafting menu compared to YUKA, it was found that pattern drafting could be accomplished with the help of supplementary tools and functions. This finding suggests that each CAD offers the corresponding tools for the same use of menus or functions in the prototype drafting process. The major difference between YUKA and CLO is that YUKA defines the pattern area by a set of line segments, whereas CLO utilizes an outline composed of closed curves. YUKA provides various specific tools according to the options such as angles, straight lines, and curves, while CLO produces the same results using combinations of a limited number of tools. Compared with YUKA, the advantage of CLO is its user-friendly task environment such as the Windows-based user interface, from the usability perspective. This study concludes that pattern drafting education using CLO would help not only industrial 3D design practitioners but also pattern education in academia

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.2
• /
• pp.695-712
• /
• 2021

As the use of smart devices is being increased rapidly by the development of internet and IT technology, the contents production and utilization rate are showing higher increase, too. In addition, the type of contents also shows very diverse forms such as education, game, video, UCC, etc. In the meantime, the contents are reproduced in diverse forms by reprocessing the original contents, and they are being serviced through the contents service platform. Therefore, the platform to make the contents reprocessing easy and fast is needed. As the diverse contents distribution channels such as YouTube, SNS, App Service, etc, easier contents distribution platform is needed, and the development of the relevant area is expected. In addition, as the selective consumption of the contents having easy accessibility through diverse smart devices is distinguished, the demand for the platform and service that can identify the contents consumption propensity by individual is being increased. Therefore, in this study, to vitalize the online contents distribution, the contents reproduction and publishing platform, was designed and materialized, which can reproduce and distribute the contents based on the real-time contents editing technology in URL unit and the consumer propensity analysis technology using the data management-based broadcasting contents distribution metadata technology and the edited image contents streaming technology. In addition, in the results of comparing with other platforms through the experiment, the performance superiority of the suggested platform was verified. If the suggested platform is applied to the areas of education, broadcasting, press, etc, the multi-media contents can be reproduced and distributed easily, through which the vitalization of contents-related industry is expected.

• Journal of the Economic Geographical Society of Korea
• /
• v.24 no.1
• /
• pp.102-121
• /
• 2021

Financial geography is an evolving subdiscipline in economic geography. This paper identifies and reviews three important 'waves' constitutive of the current state of financial geography: including the 'first' wave before 1990s when finance was regarded as a byproduct of the over-accumulation process in production sphere in the Marxist geographical political economy tradition; the 'second' wave in the mid-1990s during which financial geography was firmly established as a subdiscipline, influenced by the cultural turn and poststructuralist thoughts; and the most recent 'third' wave after the 2008~2009 global financial crisis that urged financial geographers to take power and politics more seriously and 're-politicize' with the analytical ideas of governmentality and financial subjectification from a neo-Foucauldian perspective. These waves have helped financial geography become a practice-oriented academic discourse, in which different philosophical thoughts, foci of analytical level and object, renditions of the subject, perceptions of power and politics, and geographies of finance and financialization coexist and also compete and contest one another.

• Journal of Plant Biotechnology
• /
• v.45 no.4
• /
• pp.364-368
• /
• 2018

The R2R3-type protein IbMYB1 transcription factor is a key regulator for anthocyanin biosynthesis in the storage roots of sweet potatoes. It was previously demonstrated that the IbMYB1 expression stimulates anthocyanin pigmentation in tobacco leaves, arabidopsis and storage roots of sweet potatoes. In this study, we generated the transgenic potato plants that express the IbMYB1 genes, which accumulated high levels of anthocyanins under the control of either the tuber-specific patatin (PAT) promoter or oxidative stress-inducible peroxidase anionic 2 (SWPA2) promoter. The PAT-MYB1 transgenic lines exhibited higher anthocyanin levels in the tuber than the empty vector control (EV) or SWPA2-MYB1 plants. When combined, our results indicated that overexpression of the IbMYB1 is a highly promising strategy for the generation of transgenic plants with enhanced tissue specific anthocyanin production.