• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.3
• /
• pp.124-132
• /
• 2010

In spite of the global importance of primary production of phytoplankton, some primary production data in Korean coastal waters still need to be better processed. The daily rates of water column primary production is generally estimated by integrating the primary production per unit volume over time and depth, but efforts for time integration algorithm have been conducted insufficiently. In this study a mathematical equation evaluating daily primary production integrated over time of a day is proposed and the effectiveness of the model is tested on Saemangeum Lake. The daily primary productions computed with the proposed equation were nearly the same with the results numerically integrated by substituting solar irradiance data. It was suggested that better estimation of primary production would be obtained by using monthly or weekly means of solar irradiance rather than more variable daily data. Because of the vertically heterogenous distribution of phytoplankton, it's hard to integrate the equation over depth to give the daily rates of primary production per unit area of water surface. However, the problem would be solved if, after the vertical distribution of phytoplankton was classified into several patterns and reduced to mathematical formula, every composite function of time integrated equation and chlorophyll distribution equation was integrated successfully.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.228.2-228.2
• /
• 2010

In this work, the hydrogen production costs of the nuclear energy sources are estimated in the necessary input data on a Korean specific basis. G4-ECONS was appropriately modified to calculate the cost for hydrogen production of HTE process with Very High Temperature nuclear Reactor (VHTR) as a thermal energy source rather than the LUEC (Levelized Unit Electricity Cost). The general ground rules and assumptions follow G4-ECONS. Through a preliminary study of cost estimates, we wished to evaluate the economic potential for hydrogen produced from nuclear energy, and, in addition, to promptly estimate the hydrogen production costs for an updated input data for capital costs. The estimated costs presented in this paper show that hydrogen production by the VHTR could be competitive with current techniques of hydrogen production from fossil fuels if $CO_2$ capture and sequestration is required. Nuclear production of hydrogen would allow large-scale production of hydrogen at economic prices while avoiding the release of $CO_2$. Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The major factors that would affect the cost of hydrogen were also discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.505-513
• /
• 1995

The major factors affecting productivity on daily farms in Queensland, Australia, were determined using the stepwise linear regression approach. The data were obtained from a survey conducted on the total population of daily farms in Queensland in 1987. These data were divided into six major dailying regions. The technique was applied using 12 independent variables believed by a panel of experienced research and extension personnel to exert the most influence on milk production. The regression equations were all significant (p < 0.001) with the percentage coefficients of determination ranging from 62 to 76% for equations developed using' total farm milk: production as the dependent variable. Three of the variables affecting total farm milk: production were found to be common to all six regions. These were; the amount of supplementary energy fed, the area set aside to irrigate winter feed and the size of the area used for dailying. Higher production farms appeared to be more efficient in that they consistently produced milk production levels higher than those estimated from the regression equation for their region. Other methods of analysis including robust regression and non linear regression techniques were unsuccessful in overcoming this problem and allowing development of a model appropriate for farms at all levels of production.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.3
• /
• pp.67-75
• /
• 2019

Agricultural production facilities that have been established to support improving food production, farm income, and reduction of farming time have remarkable achievements as value-neutral devices or infrastructures, but recently they are pointed out as a factor that hinders landscape by changing the contextual values of rural area. Despite this timelessness, research on the landscape design of agricultural production facilities has not been conducted until now. Based on these research necessities, this study aims to improve the process of reviewing the landscape of agricultural production facilities by analyzing the impact of activities, policies, plans. The results of this study are as follows. First, the analysis of the literature and the related data were carried out. This presents the structural limitations of why landscape review is difficult in the process of reviewing plans and the limitations of current landscape laws, deliberations, and plans. The process of reviewing the plan has formed a functionally oriented closed network, and the government policy does not properly control the landscape design of agricultural production facilities. From the viewpoint of the study, results can be used as basic data for the study of the lack of agricultural production facilities and landscape.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.30-37
• /
• 2020

In the building construction, the steel-frame work occupies an important position in terms of structure, cost and quality. Especially in Japan, steel frames have traditionally been the main structure of many buildings. For steel-frame works in such positions, this paper investigates an existing steel fabricator to clarify the actual conditions of design decision making process and management method in steel production process. This study focuses on a steel fabricator (Company M in the following sentences), whose main market is Japan and which has facilities in Thailand, China, and Japan. Company M uses QR codes to control the production status of products, and exchanges all information between inside and outside the company via specialized departments in the form of documents. The authors have already analyzed the relationship between production lead time and defect rate based on actual project data at Architectural Institute of Japan in 2016. In 2019, we expressed the process from the confirmation of the design information of the current steel frame to the production by WBS, and clarified the relationship between the production lead time and steel frame product quality structurally. In this paper, the authors reoport the progress of the survey conducted so far, the positioning of the collected data, and the future survey policy.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.34-45
• /
• 2018

The cleat system in coalbed methane (CBM) reservoirs is generally occupied by water which liberated during the coalification process, and behavior of water have influence on CBM production performance. Therefore, it is essential to investigate the effect of the water saturation to operate the degasification process and predict the CBM production performance properly. In this study, type curve analyses were performed on CBM reservoirs under various water saturation to improve the prediction of production performance. A CBM reservoir models with fully-, modestly-, and undersaturated reservoir were built to get production data using GEM by CMG Ltd., and the data were matched with Fetkovich, Palacio-Blasingame(P-B), and Agarwal-Gardner (A-G) type curve. The results showed that undersaturated reservoir was successfully matched by A-G type curve, while the Fetkovich type curve was inappropriate for matching in the late time. The modestly saturated model could be almost corresponded with all the type curve methods at late production period. For the fully saturated model, after peak production had been reached, both P-B and A-G methods showed a proper match to the reservoir production data without long-term production period. Based on the results, merit and demerit of each type curve under specific water saturation were analyzed and listed. Therefore, it is believed that the production data analysis with proper type curve model considering water saturation can be performed to predict accurate production performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.499-503
• /
• 1995

The performance records of 410 Holstein Friesian crossbred cows belonging to seven genetic groups (Fl, 3/4, 1/4, 5/8, 3/8, triple cross and miscellaneous cross) maintained at Livestock Production Research Institute, Bahadurnagar, Okara were analyzed for various parameters of lifetime traits. For the analysis 2 data sets were made. Data set I included all the cows disposed off from the herd which have completed at least one lactation while for data set II performance traits for only first five lactations were considered. The data was analyzed by Mixed Model Least squares and Maximum Likelihood computer programme PC-I version. The least squares means ${\times}$ standard errors for data set I (periods are in days and milk yield is in litres) were $994.5{\pm}15.5$, $1,877.0{\pm}70.9$, $1,651.9{\pm}19.3$, $2,533.7{\pm}36.5$, $3,530.0{\pm}40.5$, $15,785.2{\pm}320.0$, $8.46{\pm}0.19$, $5.66{\pm}0.16$ and $3.79{\pm}0.08$, respectively for age at first calving (APC), Ist lactation milk yield (FLMY), productive life (PL), herd life (HL), total life (TL), lifetime milk yield (LTMY), milk yield per day of productive life (MY/PL), milk yield per day of herd life (MY/HL) and milk yield per day of total life (MY/TL). For data set II these values were $1,004.2{\pm}21.2$, $2,220.5{\pm}113.1$, $1,429.1{\pm}40.8$, $2,302.1{\pm}73.3$, $3,307.2{\pm}77.3$, $13,189.7{\pm}667.4$, $9.10{\pm}0.34$, $5.66{\pm}0.25$ and $4.02{\pm}0.18$ in the same order. For data set I the effect of year of first calving was significant for AFC, FLMY, PL, HL, LTMY and MY/PL. The season of Ist calving was significant only for MY/PL. The effect of genetic group was significant for AFC, FLMY, MY/PL and MY/TL while the effect of parity was significant for all the traits. For data set II the effect of year of Ist calving was significant only for AFC, FLMY and PL while the season of Ist calving was significant for FLMY and PL while the effect of genetic groups was significant for MY/HL only. The lifetime production performance is in general close to the various estimates reported in the literature.

• Korean Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.95-107
• /
• 1999

Difficulties in the measuring home food production activities obstructs development of home production activity related studies. For solving such problems, this study intended to develope a home food production frequency scale. The data were collected from 219 housewives in Taejon. Validity, reliability, correlation, and multiple regression analysis were used to test home food production frequency scale. The scale's validity and reliability were reveled considerable potential for its use to ascertain relationships between home food production activity and other family variables.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1505-1510
• /
• 2018

Product modeling technology for graphics is rapidly developing. And 3D data application and usability are increasing.modeling of product design is a very important factor in constructing. 3D modeling in product design takes a lot of production time. Recently, the reverse design method is very useful because of application of 3D data and shortening of production time. In this study, first, 3D point cloud and mesh data are generated using photographs based on image data. The second is to modify the design and the third is to make the prototype with the 3D printer. This product design and production process suggests the utilization and possibility of image data, the shortening of 3D modeling production time and efficient processes. Also, the product design process proposes a model of a new product development system to adapt to the production environment.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.103-106
• /
• 2007

Recently, production and application of ortho image using high resolution image are increasing by acquired high quality data from development of photogrammetry and IT technology. Generally, An ortho image has some problems that cannot remove completely to relief displacement about cultural feature like building and overpass because of performance rectification using DEM. Therefore, in this study, I generated DSM each of four experiment cases for production of true ortho image which is removed relief displacement of building using digital photogrammetry technique and LiDAR data, presented the plan of DSM production that is appropriate to production true ortho image by analyzing an accuracy after manufacture an ortho image each of DSM.