• 소음진동
• /
• 제9권4호
• /
• pp.720-729
• /
• 1999

Coventional methods for reducing vibration in engineering designs (i.e. by stifferning or detuning) may be undesirable in conditions where size or weight must be minimized, or where complex vibration spectra exist. Some alloys with a combination of high damping capacity and good mechanical properties can provide attractive techanical and economical solutions to problems involving seismic, shock and vibration isolation. Although several non ferrous damping alloys have been developed, none of those materials are applied in any industrial factor due largely to high production cost. To meet these requirement, we have developed a new Fe-Mn high damping alloy. In previous studies, we have reported that an Fe-17%Mn alloy exhibits the highest damping capacity(Specific Damping Capacity:SDC, 30%) among Fe-Mn binary system, and proposed that the boundaries of various types such as $\varepsilon$-martensite variant boundaries, stacking faults in $\varepsilon$-martensite, stacking faults in austenitic and ${\gamma}$$\gamma /\varepsilon$ interfaces give rise to a high damping capacity. The Fe-17%Mn alloy also has advantages of good mechanical properties(T.S. 70 kg/nm$^2$ and low cost over other damping alloys(1/4 times the cost of non-ferrous damping alloy). Thus, the Fe-17%Mn high damping alloy can be widely applied to household appliances, automobiles, industrial facilities and power plant components. In this paper, the overall properties of the Fe-17%Mn high damping alloy is introduced, and its applicability to containment spray pump in the power plant is discussed.

• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.131-135
• /
• 2005

Under sulfur deprived conditions, PS II and photosynthetic $O_2$ evolution by Chlamydomonas reinhardtii UTEX 90 are inactivated, resulting in shift from aerobic to anaerobic condition. This is followed by hydrogen production catalyzed by hydrogenase. We hypothesized that the photosynthetic capacity and the accumulation of endogenous substrates such as starch for hydrogen production might be different according to cell age. Accordingly, we investigated (a) the relationships between hydrogen production, induction time of sulfur deprivation, increase of chlorophyll after sulfur deprivation, and residual PS II activity, and (b) the effect of initial cell density upon sulfur deprivation. The maximum production volume of hydrogen was 151 ml $H_2$/l with 0.91 g/l of cell density in the late-exponential phase. We suggest that the effects of induction time and initial cell density at sulfur deprivation on hydrogen production, up to an optimal concentration, are due to an increase of chlorophyll under sulfur deprivation.

• Journal of Ecology and Environment
• /
• 제30권2호
• /
• pp.171-177
• /
• 2007

Korean rivers and their surrounding environments have been used excessively for rice production in the past and more recently for construction of urban areas to accomodate the rapidly increasing population. Affected Korean rivers experience dramatic fluctuations in their water levels and have faster currents compared with those in other countries. In order to restore more natural conditions in rivers experiencing such conditions, we employed a partial restoration method, which is designed to achieve physical and biological stability simultaneously. Concrete blocks were introduced to increase the river's physical stability during floods, and terra cottem, a soil enhancer, was used to reduce water loss due to intense heat. These interventions increased the river's ability to hold water and thereby promoted plant growth. This restoration method increased vegetation coverage and species diversity in treated areas, and changed the species composition in treated areas to more closely approximate that of the control site. These results suggest that this method is effective in restoring damaged habitats to more natural conditions.

• 한국응용과학기술학회지
• /
• 제40권6호
• /
• pp.1363-1372
• /
• 2023

This study is concerned with the optimization of the manufacturing process of a hot water extract containing antioxidant activity from Lycium barbarum, traditionally known to have various physiological activities. For the establishment of the optimization process, the central composite design of response surface methodology(RSM) was used. Thirteen extraction processes were performed by encoding the independent variables, extraction temperature (65.9℃-94.1℃) and extraction time (2.59 hr-5.41 hr). As a result of the experiment, the optimal manufacturing conditions for the extract were 340.0 mg/100 g of GAE at an extraction temperature of 94.1℃ and an extraction time of 5 hr. The maximum yield of flavonoids was 22.44 mg/100 g of HES at an extraction temperature of 94.1℃ and an extraction time of 4 hr. The conditions for producing the extract with the maximum antioxidant capacity (DPPH 92.12%) were 90℃ and 4.5 hr extraction time. Therefore, the optimal manufacturing process conditions for extracts containing total phenol content, flavonoid content, and DPPH radical scavenging activity, which are dependent variables, were extraction temperature of 90-95℃ and extraction time of 4 hr, which were not significantly different from the actual values. Therefore, Lycium barbarum extract rich in total phenol and flavonoid content related to antioxidant function is expected to be used as a functional food and cosmetic material.

• 한국의류산업학회지
• /
• 제12권2호
• /
• pp.162-171
• /
• 2010

This study aims to discuss what changes Korean clothing companies and manufacturers have undergone with production facilities moving abroad due to offshore outsourcing and examine what conditions the clothing manufacturers are facing and how the clothing companies recognize those manufacturers. For these purposes, in-depth interviews were conducted with 24 firms with annual production capacity of more than 200,000 pieces among clothing brands for the domestic market, clothing exporters and promotion agencies. Those interviewed firms were the companies who were found to produce more than 200,000 pieces of clothing per year, and the interview-based survey was conducted from December 18, 2008 to January 30, 2009. The key findings from this study are as follows; first, a high percentage of interviewed firms were producing only a small number of items in Korea with a large part of their production line transferred abroad or outsourcing all of their production abroad only with their headquarters in Korea. Second, many were employing contractors rather than their own factories. Third, when asked about the wage levels of clothing manufacturers, many of the clothing companies gave responses such as: 'They are just our contractor, so we respect their decision,' 'We don't know because it's none of our business,' or 'We don't know at all.' Fourth, when asked about the work environment of clothing manufacturers, the clothing companies gave responses such as: 'We know in part,' 'To our knowledge, they conform to the Labor Standards Law,' or 'We don't know at all.' Fifth, the production line of clothing manufacturers featured straight-line systems, specialization, pairing and compounding/mixing. Sixth, it was found that clothing companies had interest in mass customization but their preparations were not satisfactory.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권12호
• /
• pp.1645-1656
• /
• 2010

This study was conducted to investigate the effects of strain on broiler performance, and age at slaughter and postchilling (PC) aging time on meat quality traits. A total of 500 one-day-old chicks (250 Hubbard classic and 250 Lohman) were reared under commercial conditions. Half of the broiler birds from each strain were slaughtered at 32 days and the other half at 42 days old. At each processing day, 168 carcasses were randomly selected (84 Hubbard and 84 Lohman) and divided into groups of 28 carcasses within each strain, and aged for 0, 4 and 24 h after chilling. Average weekly body weight was comparable between strains. Feed conversion ratio was higher (p<0.05) for the Hubbard strain during the second and third week of age. Initial carcass pH was significantly (p<0.05) affected by age where younger birds (32-d-old) had lower pH values than older (41-d-old) birds. Breast temperature was higher (p<0.001) for Lohman than Hubbard at 0, 2 and 4 h of PC. Younger birds had a lower breast temperature (p<0.001) at all measured times of PC. Thaw loss, cook loss and water holding capacity were not significantly affected by strain, age or aging time. Lohman strain had more tender meat (p<0.05) than Hubbard strain, and tenderness was improved with the increase of broiler age and aging time. Meats from Hubbard were lighter and less red than those from Lohman strain where younger birds had darker color. In conclusion, strain, age at slaughter and PC aging duration are critical to breast meat quality characteristics, and 4 h of aging are required before deboning in order to obtain more tender fillets.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권5호
• /
• pp.738-744
• /
• 2008

In most developing countries consumers purchase retail cuts from hot carcasses and prepare traditional meat products as per their convenience and requirements. In this study, effects of different post mortem handling practices on quality of meat curry from culled sheep meat have been studied. After slaughter, leg cuts were subjected to nine commonly prevalent handling conditions in India viz. deboning (boning out) and cooking within 2-3 h (1), deboning immediately and cooking after 5-6 h (2), deboning after 5-6 h and cooking (3), deboning immediately, storage at $4^{\circ}C$ for 24 h and cooking (4), chilling for 24 h at $4^{\circ}C$, deboning and cooking (5), deboning after 5-6 h, storage for 24 h at $4^{\circ}C$, and cooking (6), deboning after 5-6 h, storage for 48 h at 4??C and cooking (7), deboning after 5-6 h, freezing and cooking (8), deboning after 5-6 h, storage for 24 h at $4^{\circ}C$, freezing and cooking (9). Significant differences were observed in pH, water-holding capacity, cooking loss and shear force values. Sensory scores were significantly higher in conditions (1), (5) and (9), and significantly lower in conditions (4) and (6). From the results, it was concluded that, to have the best quality product, meat should be cooked either immediately after slaughter or should be deboned just before cooking. Storage of deboned meat at refrigerated temperature must be avoided.

• 수산해양기술연구
• /
• 제52권4호
• /
• pp.356-363
• /
• 2016

To suggest more efficient fishing operation, it was analyzed using five years (2011~2015) catch data of six Korean-flagged tuna purse seiners (with 1000 mt of haul capacity) operating in the western and central Pacific Ocean. In terms of annual total catch, it presented a two-year cycle of variation on catch, showing that catches of 2012, 2014 and 2015 were high, whereas those of 2011 and 2013 were low. The proportions on fishing effort of associated set were around 21.9~30.8% having 21.5~45.0% of total catch. In this study, there was no significant difference between catches of unassociated set and associated set. When considered having good fishing conditions, fishing activities were concentrated in the areas of Papua New Guinea (PNG) and Kiribati, while it showed that fishing ground spreaded out to the areas of not only PNG and Kiribati but also Federated States of Micronesia (FSM), Tuvalu and Solomon islands. The average number of fishing days was 271 with a range of 246~285. As restriction on fishing operation such as reduction of fishing days and higher fishing fee are expected to strengthen, the result of this study will be helpful to select more efficient fishing methods for purse seine fishery based on fishing conditions.

• 자원리싸이클링
• /
• 제15권2호
• /
• pp.50-57
• /
• 2006

해양에서 발생하는 목질 폐기물의 재활용 방안의 일환으로 폐 어류 상자를 원료로 활성탄을 제조하는 방안을 검토하였다. 폐 황산을 활성화제로 하여 온도에 따른 활성탄의 흡착능의 변화를 검토한 결과 실험조건에서 $650^{\circ}C$부근에서 최대의 흡착능이 관찰되었으며 이보다 온도가 상승할 경우 열적 분해로 인해 흡착능이 감소하는 것으로 나타났다. 활성시간은 약 120분 정도가 적절한 것으로 파악되었으며 $550^{\circ}C$ 및 60분의 활성화 조건에서 원료 물질과 활성화제의 무게비가 1:3의 조건일 때 최대 흡착능이 관찰되었다. 활성화 조건은 황산의 농도가 1.2M일 때 최적인 것으로 조사되었으며 활성화제의 종류에 따른 활성능을 비교한 결과 황산은 질산에 비해 활성탄의 흡착능면에 있어서는 그 효과가 더욱 큰 것으로 파악되었으나 수율에 미치는 영향은 두 경우 뚜렷한 차이가 없는 것으로 나타났다. 제조된 활성탄은 중성 영역에서 분산도가 높은 것으로 관찰되었으며 전 pH 영역에 걸쳐 음의 전하를 띠는 것으로 파악되어 금속 이온 함유 폐수에 효과적인 흡착제로 사용될 수 있을 것으로 사료되었다.

• 한국수소및신에너지학회논문집
• /
• 제33권5호
• /
• pp.534-540
• /
• 2022

Liquid hydrogen has the best storage capacity per unit mass and is economical among storage methods for using hydrogen as fuel. As the demand for hydrogen increases, the need to develop a storage and supply system of liquid hydrogen is emphasizing. In order to liquefy hydrogen, it is necessary to pre-cool it to a maximum inversion temperature of -253℃. The Gifford-McMahon (GM) refrigerator is the most reliable and commercialized refrigerator among small-capacity cryogenic refrigerators, which can extract high-efficiency hydrogen through liquefied hydrogen production and boil of gas re-liquefaction. Therefore, in this study, the optimal conditions for liquefying gas hydrogen were sought using the GM cryocooler. The process was simulated by PRO/II under various cooling capacities of the GM refrigerator. In addition, the flow rate of hydrogen was calculated by comparing with specific refrigerator capacity depending on the pressure and flow rate of a refrigerant medium, helium. Simulations were performed to investigate the optimal values of the liquefaction flow rate and compression pressure, which aim for the peak refrigeration effect. Based on this, a liquefaction system can be selected in consideration of the cycle configuration and the performance of the refrigerator.