• 대한인간공학회지
• /
• 제27권2호
• /
• pp.15-24
• /
• 2008

As users increasingly recognize the importance of safety and the Product Liability comes into effect, a company should take responsibility of protecting the users who use its product. In order to produce a safe product and satisfy the needs of users, it is critical for develope opriately and understand the characteristics of the product accurately. Furthermore, a safe product can be realized by considering a safety level of the product in a whole product development process. However, in general, product development projects hardly evaluate the safety of a product in the product planning step. In addition, most of safety evaluation methods which are applied in the product planning step have a tendency to be qualitative because a detailed product design step. Therefore, this research aims at enhancing the performance of the safety evaluation process by applying quantitative methods such as 'AHP' and 'Fuzzy'. AHP can help analysts derive the weight of safety factors. Fuzzy is applied to evaluate the degree of safety of product elements in this paper. The proposed method will be able to improve the safety level of a product by using the quantitative methods in the product planning step.

• 한국CDE학회논문집
• /
• 제9권2호
• /
• pp.175-182
• /
• 2004

As a bridge between design and manufacturing, process planning is to generate a sequenced set of instructions to manufacture the specified part. Automatic interpretation of manufacturing information incorporated in the design documentation such as CAD file has been a knotty subject for manufacturing engineers since no current data exchange format for product data provides a perfect interface between heterogeneous systems. The recent neutral data exchange format STEp, standard for the exchange of product model data, includes not only geometry but also technical and managerial information. STEP AP(Application Protocol) 224 is specifically dedicated to the mechanical product definition for process planning using machining features. Given a design information in STEP AP 224 format, process planning can be made without human intervention. This paper describes a method to determine the sequence of machining features by using the machining features and the manufacturing information expressed in STEP AP224.

• 패션비즈니스
• /
• 제24권3호
• /
• pp.69-84
• /
• 2020

The purpose of this study is to analyze examples of online fashion product planning of domestic fashion brands, to grasp the characteristics and step-by-step problems in product planning, and to suggest product planning methods. This study consists of a literature study and a case study. The results of th study are as follows. First, in the information analysis and product planning, product planning according to analysis and targeting of online consumers should be conducted separately from offline, and the proportion of online-only products should be expanded. Second, in the design planning and product development stages, it should be possible to secure the quantity through the pre-planning of fabrics, a to acquire the novelty of the material through the preemption of good fabrics and the pre-planning of colors to secure competitive design. Third, in the convention, a systematic review process involving company members and customer review teams should be conducted to ensure product quality and sales-ability Fourth, in the production stage, the production period must be to reduce cost. Fifth, differentiated services according to the characteristics of their products for each brand in the promotion and sales stages. Based on this analysis, a desirable approach online product planning should first run promotion phase, increasing pre-planning for the product, and organizing specialize work and manpower issues.

• 한국항만학회지
• /
• 제14권1호
• /
• pp.77-86
• /
• 2000

The planning process of complex projects in oceanic architectural engineering is characterized by the cooperation of many involved specialists and by a high degree of information exchange. In order to improve the quality of the structural design of oceanic buildings, information of different involved partners in the planning process has to be integrated. This paper aims to introduce a concept of the integrated structural design for the floating-type oceanic building using STEP(Standard for the Exchange of Product Model Data). STEP(ISO 10303) is an international standard for the computer-interpretable representation and exchange of product data and it provides a consistent data exchange format and application interfaces between different application systems. In this paper, the structural design process and information of oceanic buildings is analyzed and product models are preposed fir the exchange of the structural design information between superstructure and floating structure. The entities for calculating wind loads, metacenter and restoring forces are represented by Express. As a case study a floating hotel is applicated to describe the STEP physical file.

• 대한안전경영과학회지
• /
• 제10권1호
• /
• pp.23-31
• /
• 2008

Recently, there is a rise of accident by some defective products, especially it reported that a serious fact is a defect of design causing some problem since execute a product liability(PL), people who use products have been able to bo remunerated for a damage to those defects, so responsibilities of companies are rising more and more. Therefore, companies that are obligated to manufacture a safety product, and should make preparation for PL. For solving the problem, even though manufacturers tried to make a safety product ay mixed ways, it is seldom that its safety is considered from planning a design. This thesis has suggested a way aimed at improving a safety of products through considering a stage of a plan, by searching and analyzing the design-process in to each steps.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• 한국CDE학회논문집
• /
• 제10권6호
• /
• pp.412-420
• /
• 2005

The integration of CAD and CAM is critical for computer aided process planning. Recently, STEP has been emerged and utilized as a product data exchange standard format in CAD/CAM areas. The assembly information consists of assembly component relations, assembly features, assembly directions and mating conditions. The purpose of this study is to develop an efficient algorithm to extract assembly information directly from the STEP based files and to generate automatically assembly process plan from the extracted assembly features. The developed algorithms will generate assembly information codes for STEP(AICS). The results from this study can be a reasonable link between design and manufacturing for developing better CAAPP(Computer-Aided Assembly Process Planning) systems.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.121-122
• /
• 2002

The main principle of radiation therapy is to deliver optimum dose to tumor to increase tumor cure probability while minimizing dose to critical normal structure to reduce complications. RTP system is required for proper dose plan in radiation therapy treatment. The main goal of this research is to develop dose model for photon, electron, and brachytherapy, and to display dose distribution on patient images with optimum process. The main items developed in this research includes: (l) user requirements and quality control; analysis of user requirement in RTP, networking between RTP and relevant equipment, quality control using phantom for clinical application (2) dose model in RTP; photon, electron, brachytherapy, modifying dose model (3) image processing and 3D visualization; 2D image processing, auto contouring, image reconstruction, 3D visualization (4) object modeling and graphic user interface; development of total software structure, step-by-step planning procedure, window design and user-interface. Our final product show strong capability for routine and advance RTP planning.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2002년도 춘계학술대회 논문집
• /
• pp.429-434
• /
• 2002

For companies assembling end products from sub assemblies or components, MRP (Material Requirement Planning) logic is frequently used to synchronize and pace the production activities for the required parts. However, in MRP, the planning of operational-level activities is left to short term scheduling. So, we need a good scheduling algorithm to generate feasible schedules taking into account shop floor characteristics and multi-level job structures used in MRP. In this paper, we present a GA (Genetic Algorithm) solution for this complex scheduling problem based on a new gene to reflect the machine assignment, operation sequences and the levels of the operations relative to final operation. The relative operation level is the control parameter that paces the completion timing of the components belonging to the same branch in the multi-level job hierarchy. In order to revise the fixed relative level which solutions are confined to, we apply large step transition in the first step and GA in the second step. We compare the genetic algorithm and 2-phase optimization with several dispatching rules in terms of tardiness for about forty modified standard job-shop problem instances.

• 한국공간구조학회논문집
• /
• 제6권2호
• /
• pp.77-83
• /
• 2006

초고층건물의 구조설계 정보에는 설계작업 프로세스 모델, 설계정보 전산모델, 기본설계 프로그램 및 설계 도서생성 프로그램 개발 등 여러 가지 특성화된 부분으로 구성되어 있다. 기존의 구조 설계정보는 통합적으로 관리되는 기능이 없기 때문에 건설 정보 교환에 대한 공유가 제대로 이루어지지 않고 있다. 이러한 설계정보의 데이터 수정 및 공유를 합리적으로 처리하기 위해서 통합설계에 대한 필요성이 증가하고 있다. 또한, 초고층 구조설계에서는 건설정보의 표준화가 이루어진 후 합리적인 정보교환을 위해서도 통합설계의 필요성이 대두되고 있다. 본 연구에서는 초고층건물의 구조설계를 위하여 STEP을 이용한 초고층 구조설계의 개념을 소개하고 초고층건물의 구조설계방법에 대한 질량 엔티티 및 기둥축소량 엔티티, 사용성평가 엔티티를 제안하고자 한다.