A need of safety evaluation for product planning step

제품기획단계의 안전성 평가 필요성에 관한 연구

  • Park, Ji-Yong (Department of Industrial & System Engineering, Dongguk University) ;
  • Cho, Am (Department of Industrial & System Engineering, Dongguk University)
  • 박지영 (동국대학교 산업시스템공학과) ;
  • 조암 (동국대학교 산업시스템공학과)
  • Published : 2008.03.30

Abstract

Recently, there is a rise of accident by some defective products, especially it reported that a serious fact is a defect of design causing some problem since execute a product liability(PL), people who use products have been able to bo remunerated for a damage to those defects, so responsibilities of companies are rising more and more. Therefore, companies that are obligated to manufacture a safety product, and should make preparation for PL. For solving the problem, even though manufacturers tried to make a safety product ay mixed ways, it is seldom that its safety is considered from planning a design. This thesis has suggested a way aimed at improving a safety of products through considering a stage of a plan, by searching and analyzing the design-process in to each steps.

Keywords

References

  1. 김재정 외 공역, 제품개발론, 한올출판사, 2004
  2. 김사길, 변승남, '제품안전경영을 위한 사고비용분석의 이론적 접근', 한국경영과학회 /대한산업공학회 2003 춘계공동학술대회, pp. 230-235, 2003
  3. 김진규, '제품안전 및 신뢰성 향상을 통한 제조물책임 예방대책', IE Ineterface, 제15권, 제3호(2002), p.274
  4. 안인선, 정광태, '제품디자인에서 안전요소 검출에 관한 연구', 대한인간공학회 학술대회, 2004
  5. 오상준, '원가 절감, 제품 개발 단계에 집중하라', LG주간경제, 2006
  6. 이종석, '중소기업 제품의 품질확보를 위한 디자인 프로세스 개선에 관한 연구', 세종대학교 대학원, 2004
  7. 이용표, '신제품 개발 프로세스', 오토저널, 제27권, 1호(2005)
  8. 정철, '불황기일수록 제품개발역량 강화하라', LG주간경제, 1998
  9. Ulrich and Eppinger, 'Product Design and Development', 3rd Edition, McGraw-Hill, 2004
  10. Drury Hayward, 'Risk of injury per hour of exposure to consumer product', Accident Analysisand Prevention, Vol.28, No.1(1996), pp.115-121 https://doi.org/10.1016/0001-4575(95)00047-X
  11. Myun W. Lee, Myung Hwan Yun, Eui S. Jung and Andris Freivalds, 'High touch: Ergonomics in a conceptual design process ? case studies of a remote controller and personal telephones', International Journal of Industrial Ergonomics, Vol.19, Issue3(1997), pp.239-248 https://doi.org/10.1016/S0169-8141(95)00110-7
  12. Raid Hasan, Alain Bernard, Joseph Ciccotelli and Patrick Martin, 'Integrating safety into the design process: elements and concepts relative to the working situation', Safety Science, Volume41, Issues2-3(2003), pp.155-179 https://doi.org/10.1016/S0925-7535(02)00002-4
  13. Robert Verganti, 'Leveraging on systemic learning to manage the early phases of product innovation projects', R&D Management, Vol.27,No.4(1997),pp.381
  14. Shahrikhi M. Author, Bernard A. Coauthor, 'Risk assessment/prevention in industrial design process', IEEE International Conference on System, Manand Cybernetics(2004),pp.2592-2598
  15. S. Dowlatshahi, 'The role of product safety and liability in concurrent engineering', Computers & Industrial Engineering, Vol.41(2001),pp.187-209 https://doi.org/10.1016/S0360-8352(01)00054-7
  16. Shih-Wen Hsiao, 'Concurrent design method for developing a new product', International Journal of Industrial Ergonomics, Vol.29, Issue.1(2002),pp.42-55
  17. Shih-Wen Hsiao and Jyh-Rong Chou, 'A creativity-based design process for innovative product design', International Journal of Industrial Ergonomics, Vol.34, Issue5(2004),pp.421-443 https://doi.org/10.1016/j.ergon.2004.05.005
  18. 日本人間工學會, ユニバ- 實踐サルデイソガイドライソ, 共立出版株式會社, 2005