• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.291-292
• /
• 2006

Currently A demand of high precision workpiece is increasing in industry. At present, roundness measuring machine using Air bearing, coordinate measuring machine that are used from measurement station. but these machines will not be able to apply to In-line process. because of like these machine's price are very expensive and measurement time is long. also, the complexity of conventional roundness measurement method based on fourier transform, it makes difficult to development analysis program. This work present new architecture of a Out-diameter measuring system fur analysis of roundness of product. In this system, the influence of table motion errors is minimize by using two LVDT sensor and knife edge contact tip. We are produce a test machine and make an experimenter on Out-diameter of test bearing. The measurement result compared with roundness measuring machine.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.181-186
• /
• 1999

Recently the machining technique have been progressed rapidly according to developments of the product technique in the machine tool and new tools. But in the case of vertical machine center(VMC), to become visible there is the appearance of bending because of the structural problems of x-axis guide way, and this would effect directly on accuracy of form of the straightness, parallelism and flatness. In this paper, I purpose to check the appearance of bending with the experiment and improve the working accuracy. Under the constant working conditions, the appearance of bending of x-axis guide way was measured to confirm the effectiveness of the compensation method in the vertical machine center(VMC). By using this method the results show that the accuracy of form of the straightness, parallelism and flatness could be reduced to 20% compared with ordinary method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.2
• /
• pp.35-41
• /
• 2002

This paper describes an automatic transplantation machine of optical fiber controlled by PLC. The transplantation operations is a key operation for the optical fiber application products, such as bag, cap, and others. To transplant 200∼500 optical fibers, there are many recurrent manual operation needed with conventional process. In this paper. we propose an automatic machine that reduce transplanting time and enhance product quality. Developed machine includes transplantation, heat cutting and ultraviolet coating operation. Also proposed Machine is controlled by PLC to adjust operation parameters such as pulling length, cycle time, coating time and others. Developed Machine has been applied in the field and found to be a useful system.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.14-18
• /
• 2021

Electric Vehicle industry requires high technologies to stabilize apparatuses for the Coolant heater manufacturing. Vibrations of Leak Machine are one of the most critical factors for causing delivered of the defective product or poor inspection, which are the main reasons of the defects. In this study, the structure of the Leak Machine was analyzed through the experiment and the computer simulation to investigate the main reasons of the vibrations, and further to alter the design for the improved stability. And that design alterations were applied to the machine to identify the effects of those alterations. The result of the study shows that design alterations of the Leak Machine can effectively suppress about 97.8% of the vibrations, and further can improving the Inspection precision of the Coolant heater.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.75-81
• /
• 2006

Recently, customers interest about noise of household electric appliance is growing. so, designer of product must study to reduce noise of product. Specially, in case of household electric appliance such as washing machine, there was consumers' complaint about noise that is radiated under dehydrating condition. But, in the case of washing machine, identification of noise source is not easy when washing machine is under dehydrating condition. Because various noise source influence each other, it is difficult to find out pure contribution degree about output noise. Multi-Dimensional Spectral Analysis(MDSA) is method that can remove correlation between inputs each other and express pure contribution degree about output of single input. So in this study, we analyzed contribution of each noise source on transfer pass of noise that is radiated at dehydration of washing machine using MDSA.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.92-101
• /
• 1997

The purpose of this welding process of the exclusive welding-machine using welding torch-rotation type is to develop a mechanism which can solve the problem of twisting of welding wires and cables. The technique was developed by revising the torch position and smooth controlling of both the normal and reverse rotation. Some of the advantages of using the torch-rotation type apply to the work-rotation technique are the practical uses of increased work space and link work with the factory automation system. Do apply the welding process, I designed and made a special unit so called torch part in order to solve the problems of kinematical. And I made a control panel which can manipulate the progress of the entire process at the work shop. Even if it will be applied to another kind of axle casing's welding work, this process can be utilized if other sizes of the fixed pin and work part is produced and changed. The development of this exclusive welding-machine could reduce the manpower of skilled welding labor and increase productivity and better quality product in comparison to the handmade product.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.698-704
• /
• 2010

The machine vision system has been widely applied at automatic inspection field of the industries. Especially, the machine vision system shows good performance at difficult inspection field by contact method. In this paper, the automatic system of a slant method to inspect screw/bolt shape using machine vision is developed. The inspection system uses pattern matching method that search similar degree of the lucidity, the average lucidity, length and angle of inspection set up area using a circular scan and a line scan method. Also the feeding method for inspection product is the slant method, and feed rate is controlled by the ramp angle adjustment. This inspection system is composed of a feeding device, a transfer device, vision systems, a lighting device and computer, and is composed the sorting discharge system of the inferior product. The performance test carried out the feeding speed, the shape correct degree and the sorting discharge speed according to the type of screw/bolt. This sorting inspection system showed a satisfied test results in whole inspection items. Presently, this sorting inspection system is being used in the manufacturing process of screw/bolt usefully.

• Journal of Powder Materials
• /
• v.10 no.6
• /
• pp.443-447
• /
• 2003

Nano-sized $TiB_2$ was in situ synthesized in copper matrix through self-propagating high temperature synthesis (SHS) with high-energy ball milled Ti-B-Cu elemental mixtures as powder precursors. The size of $TiB_2$ particles in the product of SHS reaction decreases with time of preliminary mechanical treatment ranging from 1 in untreated mixture to 0.1 in mixtures milled for 3 min. Subsequent mechanical treatment of the product of SHS reaction allowed the $TiB_2$ particles to be reduced down to 30-50 nm. Microstructural change of $TiB_2$-Cu nanocomposite during spark plasma sintering (SPS) was also investigated. Under simultaneous action of pressure, temperature and electric current, titanium diboride nanoparticles distributed in copper matrix move, agglomerate and form a interpenetrating phase composite with a fine-grained skeleton.

• Journal of applied mathematics & informatics
• /
• v.6 no.1
• /
• pp.227-238
• /
• 1999

We introduce several decompositons of generalized trans-formation semigroups and investigate some of their algebraic struc-tures.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.05a
• /
• pp.25-28
• /
• 2001

We introduce sums and joins of fuzzy finite state machines and investigate their algebraic structures.