• 대한산업공학회지
• /
• 제19권3호
• /
• pp.71-79
• /
• 1993

Dynamic production planning problems are to determine the optimal production times and production quantities of product for discrete finite periods. In previous many researches, the solutions for these problems have been developed through the algorithms using dynamic programming. The purpose of this research is to suggest the new algorithm using linear programming. This research is to determine optimal production quantities of product in each period to satisfy dynamic for discrete finite periods, minimizing the total of production cost and inventory holding cost. Cost functions are concave, and no backlogging for product is allowed. The new algorithm for capacity constrained problem is developed.

• 유통과학연구
• /
• 제8권4호
• /
• pp.35-41
• /
• 2010

Although dictionary definition of standardization is 'to prevent disordered complexity and to make and use rules for reasonable simplification or unification, from a position of shop-floor operations of distribution, it is directly connected to efficiency, that is 'productivity equals cost savings'. This study analyzed influence of standardization of agricultural product packages in hypermarkets on costs in stakeholders of distribution channel such as suppliers, distribution centers and hypermarkets. The research findings demonstrated that it would influence manufacturing costs of suppliers and improve shop productivity of hypermarkets.

• 산업경영시스템학회지
• /
• 제20권42호
• /
• pp.87-98
• /
• 1997

product to assign objectives for target manufacturing cost on the basis of consumer's function envaluation. The principal purposes of the study include: to improve product differentiation for those products with major usability functions and to prepare effective steps of product concept formulation. Since scant research has been conducted toward the approach suggested above, this study suggests a new method using conjoint analysis for classifying goals of manufacturing costs based on customer's function evaluation. The ultimate goal of this study is to compare and check. The cost estimate for each structure, and eventually to decide target cost values to be reasonably understood by the R&D team.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.102-108
• /
• 1993

The purpose of burn-in is to eliminate the early failures of the products before they are delivered for customer use. Therefore burn-in should he continued until one is reasonally sure that all the weak items have failed, thus leaving the remaining items in a healthy state of reliability. From this point of view, burn-in time dependent costs such as a cost per product per burn-in time, and cost of repair of the product per failure occurred during burn-in time will he increased. Conversely, the cost of field repair of the product per failure occurred during the guarantee period will be decreased since the early failure of the product is fully eliminated during burn-in. Hence, this paper intend to determine optimal burn-in time which minimize the total of above costs associated with burn-in.

• 무역학회지
• /
• 제46권5호
• /
• pp.195-211
• /
• 2021

The purpose of this study is to examine the relationship among innovation activities, innovation performance, and management performance of export firms. I first undertake a review of previous studies related to innovation activity, innovation performance, and export firms' innovation. Based on this, I set up a research model and hypotheses. First, The innovation activity is classified into product innovation activity, process innovation activity, and administrative innovation activity. Innovation performance is divided into product quality improvement and cost reduction. And the business performance is regarded as financial performance of export's firms. This study examined whether innovation activity affect innovation performance such as product quality improvement and cost reduction. In addition, I examined whether these innovation performance affects business performance (financial performance). To achieve this, a total of 368 questionnaires are used in this study and PLS (Partial Least Square) was used to analyze structural equation. As a result, this study shows that product innovation activity have a positive effect on product quality improvement, and process innovation activity also have a positive effect on product quality improvement. However, it was found that neither product innovation activity nor process innovation activity had an effect on cost reduction. And it was found that administrative innovation did not affect product quality improvement, but had a positive effect on cost reduction. Also, it was found that quality improvement, which is an innovation performance, did not affect the financial performance of export's firms, and cost reduction, which is an innovation performance, had a positive effect on the financial performance of the export's firms.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.277-278
• /
• 2001

The successful operation of a product In service depends upon the effective provision of logistic support in order to achieve and maintain the required levels of performance and customer satisfaction. Logistic support encompasses the activities and facilities required to maintain a product (hardware and software) in service. Logistic support covers maintenance, manpower and personnel, training, spares, technical documentation and packaging handling, storage and transportation and support facilities.The cost of logistic support is often a major contributor to the Life Cycle Cost (LCC) of a product and increasingly customers are making purchase decisions based on lifecycle cost rather than initial purchase price alone. Logistic support considerations can therefore have a major impact on product sales by ensuring that the product can be easily maintained at a reasonable cost and that all the necessary facilities have been provided to fully support the product in the field so that it meets the required availability. Quantification of support costs allows the manufacturer to estimate the support cost elements and evaluate possible warranty costs. This reduces risk and allows support costs to be set at competitive rates.Integrated Logistic Support (ILS) is a management method by which all the logistic support services required by a customer can be brought together in a structured way and In harmony with a product. In essence the application of ILS:- causes logistic support considerations to be integrated into product design;- develops logistic support arrangements that are consistently related to the design and to each other;- provides the necessary logistic support at the beginning and during customer use at optimum cost.The method by which ILS achieves much of the above is through the application of Logistic Support Analysis (LSA). This is a series of support analysis tasks that are performed throughout the design process in order to ensure that the product can be supported efficiently In accordance with the requirements of the customer.The successful application of ILS will result in a number of customer and supplier benefits. These should include some or all of the following:- greater product uptime;- fewer product modifications due to supportability deficiencies and hence less supplier rework;- better adherence to production schedules in process plants through reduced maintenance, better support;- lower supplier product costs;- Bower customer support costs;- better visibility of support costs;- reduced product LCC;- a better and more saleable product;- Improved safety;- increased overall customer satisfaction;- increased product purchases;- potential for purchase or upgrade of the product sooner through customer savings on support of current product.ILS should be an integral part of the total management process with an on-going improvement activity using monitoring of achieved performance to tailor existing support and influence future design activities. For many years, ILS was predominantly applied to military procurement, primarily using standards generated by the US Government Department of Defense (DoD). The military standards refer to specialized government infrastructures and are too complex for commercial application. The methods and benefits of ILS, however, have potential for much wider application in commercial and civilian use. The concept of ILS is simple and depends on a structured procedure that assures that logistic aspects are fully considered throughout the design and development phases of a product, in close cooperation with the designers. The ability to effectively support the product is given equal weight to performance and is fully considered in relation to its cost.The application of ILS provides improvements in availability, maintenance support and longterm 3ogistic cost savings. Logistic costs are significant through the life of a system and can often amount to many times the initial purchase cost of the system.This study provides guidance on the minimum activities necessary to Implement effective ILS for a wide range of commercial suppliers. The guide supplements IEC60106-4, Guide on maintainability of equipment Part 4: Section Eight maintenance and maintenance support planning, which emphasizes the maintenance aspects of the support requirements and refers to other existing standards where appropriate. The use of Reliability and Maintainability studies is also mentioned in this study, as R&M is an important interface area to ILS.

• 산업공학
• /
• 제20권3호
• /
• pp.395-406
• /
• 2007

In the telecommunication industry, estimation of the cost of network facilities is very important since depreciation cost of the facilities accounts for a large portion of the product cost. Moreover, cost estimation in the industry becomes more difficult because of increasing indirect cost upon digital convergence, expanding multi-purpose facilities, complexity of service product, etc. Nevertheless, not much seem to have been done in improving estimation methodology of the cost of network facilities. As a result, the quality of cost information on network facilities has deteriorated, and now even decision-makers in the industry dismiss the information. Recently, two major telecommunication companies adopted a new network cost estimation method to deal with the issue. In this paper, we study the concept of new cost estimation method and the procedure to develop and apply it. We also suggest the method to carry out the cost allocation using Matlab which is more efficient and time-saving than other commercial cost calculation packages.

• International Journal of Advanced Culture Technology
• /
• 제8권3호
• /
• pp.300-306
• /
• 2020

This study analyzes the distributor's inventory model in a two-stage supply chain consisting of the supplier, the distributor and the end customer. The supplier will allow a credit period before the distributor settles the account with him in order to stimulate the demand for the product he produces. It is also assumed that the distributor pays the shipping cost for the order and hence, the distributor's ordering cost consists of a fixed ordering cost and the shipping cost that depend on the order quantity. The availability of the delay in payments from the supplier enables discount of the distributor's selling price from a wider range of the price option in anticipation of increased customer's demand. As a result, the availability of a credit transaction leads to an increase in inventory levels. On the other hand, in the case of deteriorating products in which the utility of the product perish over time, the deterioration rate with time plays a role in reducing inventory levels. In this regard, we analyze the effect of the length of the credit period and the degree of product deterioration on the distributor's inventory level. For the analysis, we formulate the distributor's annual net profit and analyze the effect of the length of credit period and deterioration rate of the product on inventory policy numerically.

• Nuclear Engineering and Technology
• /
• 제38권6호
• /
• pp.561-574
• /
• 2006

This study presents the results of an economic analysis for a comparison of the single layer and double layer alternatives with respect to a HLW-repository. According to a cost analysis undertaken in the Korean case, the single layer option was the most economical alternative. The disposal unit cost was estimated to be 222 EUR/kgU. In order to estimate such a disposal cost, an estimation process was sought after the cost objects, cost drivers and economic indicators were taken into consideration. The disposal cost of spent fuel differs greatly from general product costs in the cost structure. Product costs consist of direct material costs and direct labor and manufacturing overhead costs, whereas the disposal cost is comprised of construction costs, operating costs and closure costs. In addition, the closure cost is required after a certain period of time elapses following the building of a repository.

• 대한산업공학회지
• /
• 제29권4호
• /
• pp.321-333
• /
• 2003

Although manufacturing cost is a major part of profit in a company, it is difficult to be calculated by an analytic method. Besides, the manufacturing cost gained by simple financial structure dose not have an important meaning in market place. Therefore, an analytic method of computing the manufacturing cost is very necessary in manufacturing system. In this study, we suggested the direct cost analysis model which are able to measure accurate cost analysis of product in manufacturing system. The direct cost analysis model is made up of directly used expenditure for unit product. Also, system performances are put in the manufacturing cost analysis model so that it could be possible to analyze the change of manufacturing cost as system performances change. At the end of this paper, it verifies its relevancy and practicality of the suggested direct cost analysis model through the case study, using real data for direct labor cost.