• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.217-223
• /
• 2008

Measurement is used for evaluation of product or process exactly. If it couldn't measured correctly, Quality-cost must be raised and it would be hard to improve product quality. So, this study suggests improvement guide line for the multilateral problems of measuring instrument operation based on the investigation of 157 small and medium-sized enterprises in February, 2008. To use inspection gig correctly, man who treat it must be accustomed with the structure, the performance, the method. The inspection gig is selected properly for the measurement goal. If not, results couldn't be correctly or wasted time, efforts, and costs. When selecting a inspection gig, the locating, the clamping, and the efficiency must be considered.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.303-307
• /
• 2004

Is not used by consistency transport at transport of freight nothing but is using Pallet only by pedestal when work palletized unit load or materials handling when keep simplicity receptacle which fill raw material or product in factory in our country. Therefore, pallet that is most important function of Pallet is not empled circulation to end consumer from manufacturing plant which is circulation process whole path being done and factory. It is real condition stopping only in extremely determinate part process use of warehouse back. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.1
• /
• pp.205-213
• /
• 2008

Servicizing is defined 'not as to sell the products but as to sell the functions'. This study was done on the methods for revitalization as the object items of navigation & antenna among car parts. The direct door-to-door survey was done for 101 enterprises (direct-management stores) and percentage & t-test were done for statistics. The results can be summarized like followings. First, PR on servicizing is required. Second the optimized methods can be obtained by incorporating reuse & recycling distribution systems of servicizing with the existing recovery system Reuse distribution system can be constructed rationally because inventory control is being done correct1y with the periodic recovery. Finally, as for the analysis on the relative importance of main factors of servicizing, it shows that supports & providing the concrete frame of the government & local autonomous body are important.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.117-126
• /
• 2001

본 연구는 TL 9000 성과지표 : R 2.5 및 이를 QUEST FORUM Web Site에서 등록하기 위한 절차 및 Data Flow를 소개한다. 끝으로 TL 9000 성과지표 : R 3.0 및 Product Category 중 R 2.5에서 개정된 주요부분을 소개하며 향후 성과지표 개발 가이드라인에 대해 언급한다.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.453-457
• /
• 2004

EPC seeks to minimize variability by transferring the output variable to a related process input(controllable) variable. In the case of product control, a very reasonable objective is to try to minimize the variance of the output deviations from the target or set point. We consider an alternative EPC model with first-order autoregressive disturbance.

• IE interfaces
• /
• v.25 no.4
• /
• pp.376-381
• /
• 2012

As the number, complexity and interaction of electrical, electronic and programmable electronic (E/E/PE) systems increase, a growing emphasis has been placed on the concept of functional safety during product development. IEC 61508 provides guidelines and standardized procedures in the development of reliable and dependable E/E/PE systems to assure functional safety. Determining risk classes (i.e., safety integrity levels, SILs) associated to a specific E/E/PE item may be recognized as one of the most crucial activities in the product development per IEC 61508 since SILs are used to specify necessary safety requirements for achieving an acceptable residual risk. This article presents a case study on the assessment of SILs applying failure modes, effects and diagnostic analysis (FMEDA) from which failure rates may be derived for each important failure category by combining a standard FMEA with online diagnostic techniques.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.3
• /
• pp.9-15
• /
• 2023

As the first step of risk management, risk identification is inevitable to understand the degree of work safety. However, the safety requirements can be divided in necessary factors and additional factors. Thus, we propose a safety requirements assessment model using Kano model derived from Herzberg's two-factor theory, classifying safety requirements into ideal elements and must-be elements. The Kano model is usually applied to evaluate customer satisfaction divided into three major requirements in the fields of product development and marketing: attractive, must-be, and one-dimensional requirements. Among them, attractive requirement and must-be requirement are matched with ideal element and must-be element for safety requirement classification, respectively. The ideal element is defined as preventive safety elements to make systems more safe and the must-be element is referred to as fatal elements to be essentially eliminated in systems. Also, coefficients of safety measurement and safety prevention are developed to classify different class of safety requirements. The positioning map is finally visualized in terms of both coefficients to compare the different features. Consequently, the proposed model enables safety managers to make a decision between safety measurement and prevention.

• International Journal of Safety
• /
• v.9 no.2
• /
• pp.22-28
• /
• 2010

This paper describes a web-based design review system as a knowledge management system relating reliability and safety system design. Since people's consciousness for safety and security become sensitive and increases the need of establishing a proactive prevention method for internal failures and relating risks in products. It also means that prevailing tacit knowledge in retired workers, in order to transform them to be easily used to support new system development, become more important. When considering safety and reliability design, at least two data sheet are necessary; Failure Modes and Effects Analyses (FMEA) and Risk Assessment (RA). These two data are practically made separately. However, it includes the concerns that a risk by failures during long-term use may not be noticed. To overcome this insufficiency, a support tool for integrating reliability evaluation and risk assessment data simultaneously is expected to be revealed. The authors have then developed a web-based design review system for reliability and safety system design. The system include various profitable functions; making FMEA and RA sheet, retrieving past data sheet for engineering change management and new product development and web-based discussion to increase the efficiency of discussion. The system is applied to one practical development works in order to demonstrate its effectiveness that is to be made clear by interviewing user's qualitative comment.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.51-57
• /
• 2009

The goal of this study is to propose the effective method of investigating the injurious factors and make improvement plans that prevents the workers against musculoskeletal disorders at plastic product companies and the same business field with similar working conditions and process. A questionnaire are adopted to analyze the symptoms of workers' musculoskeletal disorders, and ergonomic assessment methods such as RULA, OWAS are performed to find out harmful factors of workplace and working posture. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders risk factors and making improvement plans to the plastic product companies and the same business field with similar working conditions and process.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.177-189
• /
• 2014

The objective of the present study is to analyze the relationship of suppliers and customer participation in product development process and effects of such participation on product innovation since it is getting more and more weight in manufacturing companies. It is also aimed in this study to explore if business performance of manufacturing companies might be affected by the suppliers participation as well as product innovation that is realizable by such participation. From the analysis, following conclusions could be drawn: First, suppliers participation in manufacturing companies turned out to have influence upon product innovation (standardized coefficient=0.193, C.R=3.510), implying that nothing is more important than the role of suppliers who have intention to realize innovation through participation in manufacturing companies. Second, the analysis showed that customer participation exercised impact upon product innovation of manufacturing companies (standardized coefficient=0.686, C.R=6.433), suggesting that the more customer participate in product development process of manufacturing companies, the more manufacturing companies could sharpen their competitiveness. Third, it was made known from the analysis that the product innovation thanks to suppliers and customer participation in manufacturing companies could have influence upon their business performance (standardized coefficient=0.762, C.R=7.666), signifying that the product innovation of manufacturing companies might depend on the participation of suppliers and manufacturers and, in turn, could affect their own business performance.