A Study on Management for Measuring Instrument of Small and Medium-sized Enterprises - Focusing on the Inspection Gig -

중소제조업체의 측정기 운영에 관한 실증적 연구 - 검사 지그를 중심으로 -

  • Published : 2008.06.30

Abstract

Measurement is used for evaluation of product or process exactly. If it couldn't measured correctly, Quality-cost must be raised and it would be hard to improve product quality. So, this study suggests improvement guide line for the multilateral problems of measuring instrument operation based on the investigation of 157 small and medium-sized enterprises in February, 2008. To use inspection gig correctly, man who treat it must be accustomed with the structure, the performance, the method. The inspection gig is selected properly for the measurement goal. If not, results couldn't be correctly or wasted time, efforts, and costs. When selecting a inspection gig, the locating, the clamping, and the efficiency must be considered.

Keywords

References

  1. 곽호찬, 이희준 "실용 정밀 측정", 청호, (2002) : 106-107
  2. 유현종, 정수일 "측정기의 효율적 운영에 관한 실증적 연구", 안전경영과학회지, 제10권 (2008) : 184
  3. 이승훈, "6시그마와 QS-9000을 위한 측정시스템 분 석", 청문각, (2002) : 3
  4. 정연택 외 3인, "치공구설계", 건기원, (2006) : 539-541
  5. 중소기업진흥공단, "불량율 제로를 위한 설계 및 응용", 중소기업진흥공단, (2007) : 100-101
  6. 중소기업진흥공단, "치공구설계", 중소기업진흥공단, (2007) : 112-113
  7. 차일남 외 4인, "최신 치공구 설계", 대광서림, (2006) : 45-46
  8. 副島吉雄, 米持政忠, "精密測定", 共立出版株式會社, (1981) : 14
  9. 日刊工業新聞社(工場管理)編, "ポカヨケ大圖鑑", 日刊工業新聞社, (1992) : 8-11
  10. Anthis, U. L., R. J. Stanula and R. F. Hart, "The Measurement Process : Roadblock to Product Improvement?", Quality Engineering, Vol. 3, No. 4, (1991) : 461 https://doi.org/10.1080/08982119108918875