• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.36-42
• /
• 2019

The ESP (Electronic Stability Program) is an active control system that controls the posture of the vehicle by sensing the unstable state of the vehicle during braking, driving, or turning. The system works if the vehicle becomes unstable and it is very dangerous to develop it in the actual vehicle. For this reason, many studies have been carried out on the method of developing with simulation such as SIL / EIL. Some advanced companies have already applied it to the product development process. In this study, ESP hydraulic system and braking device model were constructed using SimulationX to build ESP SIL / EIL model. The hydraulic system model was constructed using the actual design parameters and the performance of the hydraulic model was verified by comparing with the actual vehicle test.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4620-4624
• /
• 2022

Several cadmium zinc telluride (CZT) crystals were fabricated into radiation detectors using methods that included slicing, dicing, lapping, polishing, and chemical etching. A wet passivation with sodium hypochlorite (NaOCl) was then carried out on the Br-etched detectors. The Te-rich layer on the CZT surface was successfully compensated to the Te oxide layer, which was analyzed with X-ray photoelectron spectroscopy data of both a Br-etched crystal and a passivated CZT crystals. We confirmed that passivation with NaOCl improved the transport property by analyzing the mobility-lifetime product and surface recombination velocity. The electrical and spectroscopic properties of large volume detectors were compared before and after passivation, and then the detectors were observed for a month. Both bar and quasi-hemispherical detectors show an enhancement in performance after passivation. Thus, we could identify the effect of NaOCl passivation on large volume CZT detectors.

• Journal of the Korean Home Economics Association
• /
• v.49 no.10
• /
• pp.29-37
• /
• 2011

The principal objective of this study was to evaluate the consumption patterns, the importance of product properties, and the satisfaction levels of blackberry and mulberry fruit beverage products(BMBPs) in the Jeonbuk area, Korea. Self-administered questionnaires were collected from 294 customers(male 40.8%, female 59.2%) residing at Jeonju in Jeonbuk area. Descriptive and comparative statistical analyses were completed using SPSS PC program(version 19.0). Approximately, 61.6% of participants consumed BMBPs 1-2times a year. Only 1.7% of participants consumed BMBPs everyday. The main information source about BMBPs was 'families/friends'. About 58.8% of participants responded that the main reason for purchasing BMBPs was 'for health'. The result indicated the overall importance level(3.94) was higher than the satisfaction level(3.41)(p < .001). The importance and satisfaction levels of the older group (50's) were significantly higher than the levels of younger group(20-30's)(p < .01 ; p < .05). According to the IPA(Importance-Performance Anslysis), 'price' and 'credibility' of companies were the most important properties that had to be changed as soon as possible to increase satisfaction with BMBPs. Therefore, to increase BMBPs'-consumption, quality improvements on these products through cooperation between BMBPscompanies, the regional government, and research institutions are necessary.

• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.107-127
• /
• 2002

Database system parameter tuning is one of database system tuning that achieve to improve performance of database system with application program tuning and data model tuning. By parameter tuning adjusts value of entry that is staled in data dictionary's parameter file that is included to database system, it is thing which make relevant database system can display performance of most suitable. And, it is that achievement is one o( possible tuning method immediately without occurrence of additional expense or involved hardware for database system performance elevation and ashes composition of software. But, it is actuality that administration about parameter practical use is not achieved, and is using Default Value of parameter that database management system offers just as it is systematically. So, this paper presents parameter tuning process that can ：achieve Parameter tuning of database system that is operating present systematically, and parameter tuning process each activity important input urea and tuning achievement product. And explain about effect and result that happen by sort database system performance and parameters that it is affinity systematically, and grasp relationships between parameter, and change parameter of string database system. And not that parameter uses contents that specify by fixing when establish database administration system, is going to emphasize and explain that must utilize changing continuously during database system operation. It changes parameter entry value how in various kinds different operation environment and present if must apply, and will arrange effect that this parameter enoy value alteration gets in performance liking into account point that is actuality that is using parameter that define database administrators when install the database system just as it is continually without alteration.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1295-1299
• /
• 2003

The Mass Flow Controller(MFC) has become crucial in semiconductor manufacturing equipments. It is an important element because the quality and the yield of a semiconductor process are decided by the accurate flow control of gas. Therefore, the demand for the high speed and the highly accurate control of MFCs has been requested. It is hard to find an article of the control algorithm applied to MFCs. But, it is known that commercially available MFCs have PID control algorithms. Particularly, when the system detects the flow by way of heat transfer, MFC control problem contains the time delay and the nonlinearity. In this presentation, MFC control algorithm with the superior performance to the conventional PID algorithm is discussed and the superiority is demonstrated through the experiment. Fuzzy controller was utilized in order to compensate the nonlinearity and the time delay, and the performance is compared with that of a product currently available in the market. The control system, in this presentation, consists of a personal computer, the data acquisition board and the control algorithm carried out by LabWindows/CVI program on the PC. In addition, the method of estimating an actual flow from sensor output containing the time delay and the nonlinearity is presented. In conclusion, according to the result of the experiment, the proposed algorithm shows better accuracy and is faster than the conventional controller.

• Journal of Mechanical Science and Technology
• /
• v.17 no.10
• /
• pp.1450-1457
• /
• 2003

Structural integrity of either a passenger car or a light truck is one of the basic requirements for a full vehicle engineering and development program. The results of the vehicle product performance are measured in terms of durability, noise/vibration/harshness (NVH), crashworthiness and passenger safety. The level of performance of a vehicle directly affects the marketability, profitability and, most importantly, the future of the automobile manufacturer. In this study, we used the Virtual Proving Ground (VPG) approach for obtaining the dynamic stress or strain history and distribution. The VPG uses a nonlinear, dynamic, finite element code (LS-DYNA) which expands the application boundary outside classic linear, static assumptions. The VPG approach also uses realistic boundary conditions of tire/road surface interactions. To verify the predicted dynamic stress and fatigue critical region, a single bump run test, road load simulation, and field test have been performed. The prediction results were compared with experimental results, and the feasibility of the integrated life prediction methodology was verified.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.57-63
• /
• 2002

The construction market has a major impact on the overall United States economy. Recent statistics estimate the gross domestic product (GDP) of the U.S. construction industry at some $416.4{\$}$ billion dollars, representing approximately $4.5\%$ of the U.S. GDP. Because the business environment in construction is highly competitive, the participants in the industry must improve their performance and processes to survive. Hence, Benchmarking has been generating interest in the construction industry. This paper provides an overview of the CII Benchmarking and Metrics Program. Following some background and a descriptive discussion of the database, an abridged presentation of result of data analysis. The adoption of benchmarking in Korean construction industry can be another opportunity to improve Korean construction industry.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.153-158
• /
• 2017

Reducer is a device to transmit and change torque and speed from drive shaft to driven shaft with excellent transmission efficiency, and it is widely used in many areas today. Reduction gear consists of two axes, gear, bearing supporting axes, and housing. The simplest method to transmit rotation or power to multiple axes is to attach circular plates to two axes and contact each other. However, in this case, if increasing number of rotations or if contact pressure is small, because of slipping, it cannot transmit power. For problems for the current reducer case, it is heavy and its assembling and repair is difficult. In addition, there are few studies about manufacturing and performance testing of worm gear reducer, causing lack of the foundation to improve the product competition and the performance.

• Natural Product Sciences
• /
• v.16 no.1
• /
• pp.39-42
• /
• 2010

The content of hyperin in Acanthopanax species was determined by high performance liquid chromatography (HPLC). Hyperin was quantified by a reverse-phase column with elution program [initially gradient solvent (acetonitrile : water = 85 : 15 to 80 : 20 for 20 min), then isocratic solvent (acetonitrile : water = 80 : 20 for 20 min), and finally gradient solvent (acetonitrile : water = 80 : 20 to 65 : 35 for 20 min)]. UV detection was conducted at 210 nm. The content of hyperin in the fruits of Acanthopanax was measured in the species A. chiisanensis (2.04 mg/g), A. sessiliflorus (1.13 mg/g), A. divaricatus (0.98 mg/g), A. koreanum (0.75 mg/g) and A. senticosus (0.05 mg/g). The content of hyperin in A. chiisanensis was higher than that of other Acanthopanax species.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.775-780
• /
• 2013

In recent years, a notebook like an ultrabook gets thinner. Its thickness causes problems in cooling fan performance, system installation condition, and so on. In this study, we installed a small turbofan in notebook system with very narrow gap in order to generate similar condition to a real product. Experiments were performed to measure the fan's performance and the flow and noise characteristics, its results were compared with computational ones. Prediction of P-Q curve using CFD showed under about 5% error in high flow rate and its trend was agreed with experimental one over the flow field. Experimental data to measure the noise at a distance of 100 mm from a rotation axis direction of an impeller corresponded well with computational ones of broadband and BPF noise. The noise experiments to measure at a distance of 100 mm from a rotation axis direction of an impeller corresponded well with computational ones of broadband and BPF noise. Especially, tip part of impeller blade and part of exit and bottom near in an analysis by a commercial program(FlowNoise).