• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.503-506
• /
• 2004

Evolutionary operation is useful to improve on-line full-scale manufacturing processes by systematically changing the levels of the process variables without jeopardizing the product. This paper presents a system design for an evolutionary operation software called 'evolutionary optimizer'. The system design is based primarily on data flow diagram. Evolutionary optimizer consists of four modules: factorial design module, many variables module, mixture Production module, and mean/dispersion module.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.39-43
• /
• 2016

Most of automobile parts manufactured through sheet metal forming are mass-produced by using press mold. In recent years, automation and speeding up of press lines have been expanding to maximize product productivity using a press die. The proportion of the moving time in the press line is high, and therefore requires high-speed and automated equipment for the moving process. In this paper, to provide the double-moving system can be the moving time reduction and increased productivity. Developed transport system consists of the material supply, the material feeding device and the PLC controller and the devices are positioned between each of the pressing process. In this paper, the double-moving system including developed units using a multi-axial single-acting through this reduced the C/T(cycle time) and improved the productivity.

• 산업경영시스템학회지
• /
• 제43권1호
• /
• pp.7-15
• /
• 2020

It is a general phenomenon for manufacturers to provide vertically differentiated product line for more profit through improved market coverage. For such manufacturers, the compatibility between vertically differentiated products is an important decision issue. Some manufacturers provide full compatibility between high and low version products, whereas some provide only downward compatibility for the purpose of recommending high version product. In this study, the two representative compatibility strategies, full or downward, between vertically differentiated products produced by a single manufacturer are analyzed, especially under network externality and in the viewpoint of profit maximization. To do this we used a market model which captures the basic essence of vertical differentiation and network externality. Based on the proposed market model, the profit maximizing solutions are derived and numerically analyzed. The results can be summarized as follows : (1) Regardless of compatibility strategy, under network externality, vertical differentiation is always advantageous in terms of profit. (2) The full compatibility strategy is shown to be the most advantageous in terms of profit. In addition, it is necessary to make quality difference between differentiated products as wide as possible to maximize profit. (3) To gradually drive low version product out of the market and shift the weight pendulum of market to high version product, it is shown that the downward compatibility strategy is essential. Unlike intuition, however, it is also shown that in order to drive low version product out of market, it is necessary to raise the quality of the low version product rather than to lower it.

• Journal of Microbiology and Biotechnology
• /
• 제2권1호
• /
• pp.41-45
• /
• 1992

Shikonin production was examined in a bubble column bioreactor system with the hairy roots of Lithosphermum erythrorhizon. The volumetric productivity was higher than those obtained from other reactor configurations with free or immobilized cells of the same cell line. The productivities of the bubble column reactor, with and without a product absorption trap, were 7.4 and 4.5 mg of shikonin/l/d, respectively. This indicated the importance of the product removal in the design and operation of the shikonin production system with hairy root culture.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2418-2423
• /
• 2005

Hard Disk Drive (HDD) test system is the equipment for the final test of HDD product by iterative read/write/seek test. This paper proposes an expert system for the fault diagnosis of HDD test systems. The purposed expert system is composed with two cascade inference, fuzzy logic and conventional binary logic. The fuzzy logic determines the possibility of the system fault using the test history data, then, the binary logic inferences the fault location of the test system. The proposed expert system is tested in SAMSUNG HDD product line, KUMI, KOREA, and shows satisfactory results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2424-2429
• /
• 2005

Hard Disk Drive (HDD) test system is the equipment for the final test of HDD product by iterative read/write/seek test. This paper proposes an expert system for the fault diagnosis of HDD test systems. The purposed expert system is composed with two cascade inference, fuzzy logic and conventional binary logic. The fuzzy logic determines the possibility of the system fault using the test history data, then, the binary logic inferences the fault location of the test system. The proposed expert system is tested in SAMSUNG HDD product line, KUMI, KOREA, and shows satisfactory results.

• 한국전자거래학회지
• /
• 제24권3호
• /
• pp.53-71
• /
• 2019

소프트웨어 시스템이 복잡하고 대규모화 되어감에 따라 새로운 기능을 제공하기 위해 소프트웨어 컴포넌트 또는 모듈을 재사용하는 방법을 요구하고 있다. 본 논문에서는 서비스 제공자와 서비스 사용자에게 SOA와 MSPL을 결합하여 가변성 서비스를 제공하고 재사용하여 웹 시스템 개발 방법을 제시하였다. 제시한 방법은 서비스 제공자 관점에서, 재사용 가능한 가변성 서비스를 휘처 식별 가이드라인을 적용하여 신택스 기반, 기능기반과 행위기반 방법으로 휘처로 식별하고 구현하여 재사용 자산으로 관리하였다. 그리고 사용자 관점에서 서비스를 구조적으로 조합하고 재구성하는 방법으로서 워크플로우를 모델링하여 서비스를 구성하여 웹 시스템을 구현하였다. 본 논문에서 구축한 웹 시스템의 재사용을 기능점수로 측정한 결과 재사용의 증가와 유사프로젝트에 적용해 비용 절감 효과를 검증하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2013-2024
• /
• 2006

This paper proposes a condition classification system using wavelet transform, feature evaluation and artificial neural networks to detect faulty products on the production line of reciprocating compressors for refrigerators. The stationary features of vibration signals are extracted from statistical cumulants of the discrete wavelet coefficients and root mean square values of band-pass frequencies. The neural networks are trained by the sample data, including healthy or faulty compressors. Based on training, the proposed system can be used on the automatic mass production line to classify product quality instead of people inspection. The validity of this system is demonstrated by the on-site test at LG Electronics, Inc. for reciprocating compressors. According to different products, this system after some modification may be useful to increase productivity in different types of production lines.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1451-1457
• /
• 2018

Injection compression molding (ICM) is an advantageous processing method for producing thin and large polymeric parts in a robust manner. In the current study, we employed the ICM process for an energy-related application, i.e., thin and large polymeric battery case. A mold for manufacturing the battery case was fabricated using injection molding. The filling behavior of molten polymer in the mold cavity was investigated experimentally. To provide an in-depth understanding of the ICM process, ICM and normal injection molding processes were compared numerically. It was found that the ICM had a relatively low filling pressure, which resulted in reduced shrinkage and warpage of the final products. Effect of the parting line gap on the ICM characteristics, such as filling pressure, clamping force, filling time, volumetric shrinkage, and warpage, was analyzed via numerical simulation. The smaller gap in the ICM parting line led to the better dimensional stability in the finished product. The ICM sample using a 0.1 mm gap showed a 76% reduction in the dimensional deflection compared with the normal injection molded part.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.58-67
• /
• 2002

Since the inception of off-line quality control, it has drawn a particular attention from research community and it has been implemented in a wide variety of industries mainly due to its extensive applicability to numerous real situations. Emphasizing design issues rather than control issues related to manufacturing processes, off-line quality control has been recognized as a cost-effective approach to quality improvement. It mainly consists of three design stages: system design, parameter design, and tolerance design which are implemented in a sequential manner. Utilizing experimental designs and optimization techniques, off-line quality control is aimed at achieving product performance insensitive to external noises by reducing process variability. In spite of its conceptual soundness and practical significance, however, off-line quality control has also been criticized to a great extent due to its heuristic nature of investigation. In addition, it has also been pointed out that the process optimization procedures are inefficient. To enhance the current practice of off-line quality control, this study proposes an integrated optimization model by utilizing a well-established statistical tool, so called response surface methodology (RSM), and a tolerance - cost relationship.