• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.578-581
• /
• 2014

은행의 경영환경은 급변하고 금융시장에서의 경쟁은 심화되고 있는 가운데 은행의 경쟁력 확보는 상품의 시장 진입 속도에 달려있으나, 상품 개발의 지연으로 시장 점유율의 확대 기회를 놓치고 있는 실정이다. 이에 국내 은행들은 시장 선점을 위해 IT기반의 금융 신상품 개발에 많은 투자를 하고 있다. 본 연구는 신속한 금융 신상품 개발을 위해 상품 조건들을 레고 블록처럼 조립하면 쉽고 빠르게 상품이 만들어 지는 IT기반의 상품 팩토리의 아키텍처와 상품 생성 관계도를 정의하며, 변동금리와 층화(Tier) 계층의 상품 생성에 효율적인 매트릭스 조건의 이율형을 제시한다. 아울러 이러한 기반을 활용한 시스템의 개발 생산성과 프로젝트의 특성 및 효과 등을 검증한다.

• Food Science and Industry
• /
• v.53 no.2
• /
• pp.183-199
• /
• 2020

Traditional food is the basis of Korean food, but in the process of industrialization, Japanese soybean fermented product making method became standardization process of Korean soybean fermented product as a factory type. As a result, traditional fermented food was pushed behind the industrialization. At present, there is anxiety in the development of the fermented soybean product industry due to the gap in management level between the manufacturers, the decrease in consumption of Jangryu due to changes in dietary life, and the negative image as high salt food. In order to overcome these problems and lead continuous growth, governmental industrial development policies such as traditional liquor and Kimchi are inevitably needed. By laying the legal and institutional foundation and making good use of it in industry, it will be the foundation for continuous development in the market where fierce competition is accelerated.

• Journal of Platform Technology
• /
• v.10 no.3
• /
• pp.21-29
• /
• 2022

Recently, the scope of the smart factory has been expanded, and process research to minimize the part that requires manpower in many processes is increasing. In the case of detecting defects in the appearance of small products, precise verification using a vision system is required. Reliability and speed of inspection are inefficient for human inspection. In this paper, we propose an algorithm for inspecting product appearance defects using a machine vision system. In the case of the remote control targeted in this paper, the appearance is different for each product. Due to the characteristics of the remote control product, the data obtained using two cameras is compared with the master data after denoising and stitching steps are completed. When the algorithm presented in this paper is used, it is possible to detect defects in a shorter time and more accurately compared to the existing human inspection.

• The Korean Journal of Applied Statistics
• /
• v.34 no.1
• /
• pp.99-114
• /
• 2021

With the Fourth Industrial Revolution based on new technology, the semiconductor manufacturing industry researches various analysis methods such as detecting process abnormalities and predicting yield based on equipment sensor data generated in the manufacturing process. The semiconductor manufacturing process consists of hundreds of processes and thousands of measurement processes associated with them, each of which has properties that cannot be defined by chemical or physical equations. In the individual measurement process, the actual measurement ratio does not exceed 0.1% to 5% of the target product, and it cannot be kept constant for each measurement point. For this reason, efforts are being made to determine whether to manage by using equipment sensor data that can indirectly determine the normal state of each step of the process. In this study, the Functional Data Analysis (FDA) was proposed to define a process abnormality detection process based on equipment sensor data and compensate for the disadvantages of the currently applied statistics-based diagnosis method. Anomaly detection accuracy was compared using machine learning on actual field case data, and its effectiveness was verified.

• Information Systems Review
• /
• v.19 no.2
• /
• pp.95-113
• /
• 2017

The advent of information communication technology or the Fourth Industrial Revolution facilitated the fusion of equipment and management systems, such as Manufacturing Execution System, Enterprise Resource Planning, and Product Lifecycle Management, in the successful implementation of smart factories. The government supports the early adoption of these systems in small and medium companies to enhance their global competitiveness in producing products that can be recognized in a dramatically changing manufacturing environment. This study introduces smart factories to improve company competitiveness and address influences from the government assistance, CEO leadership, external consultancy, and organizational participation. We analyzed 101 results received from the questionnaires circulated to small- and medium-sized manufacturing companies. Given a successful smart factory implementation, company competitiveness is the factor that mostly influences organizational participation, government assistance, external consultancy, and CEO leadership. This study suggests several perspectives to implement a smart factory, which is the most important aspect of company competitiveness.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.128-136
• /
• 1999

This paper suggests a new object-oriented methodology, ESBD(Evolutionary Simulation Based Design), for the development of an automated manufacturing system in shipbuilding. The target system, AHMS(Automated Hull-piece Manufacturing System), is a virtualized and distributed system controlling the manufacturing processes of storing, surface-pretreatment, cutting, 1st and 2nd curvature generation of material plates. The control and product-flow simulation is applied for the real-time product monitoring and product data management(PDM). The prototype system of AHMS also outlines the layout of the new automated factory.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.329-331
• /
• 2018

In this paper, we propose a monitoring system that starts with the supply of raw materials for threading, is processed into a lathe machine, and checks for defects of the product are automatically performed by the robot with Smart Factory technology through assembly and disassembly. Completion check according to the production instruction quantity and production instruction is made by checking the production status according to whether or not the raw material is worn by the displacement sensor, and checking the pitch and the contour of the processed female and male to determine OK and NG. The robotic system acts as a relay for loading and unloading of raw materials, pallet transfer, and overall process, and it acts as an intermediary for organically driving. The location information of the threaded products is collected by using the non-contact wireless tag and the energy saving system Production efficiency and utilization rate were checked. The environmental sensor collects the air-conditioning environment data (temperature, humidity), measures the temperature and humidity accurately, and checks the quality of product processing. It monitors and monitors the driving hazard level environment (overheating, humidity) of the product. Controls for CNC and robot module PLC as a heterogeneous system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.73-82
• /
• 2019

In order to build a smart factory, building a CPPS (Cyber Physical Product System) is an important system that must be accompanied. Through the CPPS, it is the reality of smart factories to move physical factories to a digital-based cyber world and to intelligently and autonomously monitor and control them. But The existing CPPS architectures present only an abstract modeling architecture, and the research that applied the OPC UA Framework (Open Platform Communication Unified Architecture), an international standard for data exchange in the smart factory, as the basic system of CPPS It was insufficient. Therefore, it is possible to implement CPPS that can include both cloud and IoT by collecting field data distributed by CPPS architecture applicable to actual factories and concentrating data processing in a centralized In this study, we implemented CPPS architecture through central OPC UA Server based on OPC UA conforming to central processing OPC UA Framework, and how CPPS logical process and data processing process are automatically generated through OPC UA modeling processing We have proposed the CPPS architecture including the model factory and implemented the model factory to study its performance and usability.

• Knowledge Management Research
• /
• v.22 no.2
• /
• pp.209-225
• /
• 2021

Product Lifecycle Management is a well-defined management method consisting of 8 knowledge areas. Since the 4th industrial revolution is closely related to smart factories, the importance of product lifecycle management, which effectively manages the entire process from product idea generation to disposal, is emerging. This study analyzed the current and future applications of the knowledge domain of product life cycle management from the perspective of the 4th industrial revolution for experts in the field of product life cycle management. The expert's perception was analyzed from the current point of view and the future point of view to see how the product life cycle management knowledge area is applied in the field. The current and future application degree of the knowledge domain of product life cycle management was analyzed, and whether there was a difference between the knowledge domains in terms of the level of application was analyzed. Based on the analyzed results, its meaning and future flow are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.540-543
• /
• 1986

In this article, recent trends of technology in design of CNC system for machine tools which has increased in number and applications by needs for FA(Factory Automation), save of labor in various industries, are described. These technology improvements in CNC system take place especially in the field of performance, reliability, compactness, price, etc. From these technology improvements, the theme of "performance improvements of CNC system" are selected and mostly described in this article. Also, the major features of a CNC system product of our company and its characteristics in system design are briefly described.described.