• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.467-475
• /
• 2015

In this paper, the FREECAD 0.14 was used for modeling conventional Selfie-stick and the newly proposed Selfie-stick design. The purpose of this paper is to demonstrate the utility of FREECAD 0.14, which is open-source and still in development for further use. After modeling the conventional Selfie-stick, CatiyaV5 was used to assemble FREECAD 0.14 drawn elements. Main advance in newly designed Selfie-stick is the portability. To improve portability of the Selfie-stick, folding mechanism was adopted from folding LED stands. Several mechanisms were adopted to improve user convenience as well. Ansys 14.0 was used for structural analyses of conventional Selfie-stick model and the newly designed model as well. Several simplifications for the models were needed to process the analyses. When analyzing the newly designed model various materials were used one by one to find compatible composition. Using Aluminum alloys for the stick and the hand grip was found to be compatible. FREECAD was useful for suggestion of the newly designed model but not so much useful to design an actual product. Various efforts would make FREECAD the best choice for industrial use for free as it is named.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.665-674
• /
• 2018

In this paper, we propose a development results of a D-type non-rechargeable lithium battery($Li/SOCl_2$) on improvement in a low cost protection circuit of discharge for domestic military power source. According to this study, we describe a new design and product with 8-bit microcontroller in the protection circuit which can estimate state of health of the battery regardless of occurring an initial voltage delay. Also this paper discuss and facilitate development as solution to a safety about the non-rechargeable lithium batteries. As a result, we verified a quality of the protection circuit by a development test and evaluation(DT&E) process.

• Korean journal of food and cookery science
• /
• v.19 no.4
• /
• pp.477-492
• /
• 2003

The purposes of the study were to establish HACCP-based standards and guidelines for conducting a plan review to build, or renovate, hospital food service establishments, and ensure the safety of foodservice and reduce the risk of food borne illness. The scope of the study included suggestion for the planning of hospital foodservice facilities: layout, design, equipment and modeling. The results of this study can be summarized as follows: 1) The development of a foodservice facility plan based on the results of a survey, literature reviews and the results of interviews with foodservice managers from 9 general hospitals. This was composed of operational policies in foodservices, layout characteristics, space allocation, selection, design, specification standards for equipment and the construction principles of foodservice facilities. 2) Two foodservice facility models were developed, one for general hospitals with 900 beds (2,000 patients and 2,500 employee meals per day) and the other for general hospitals with 300 beds (600 patients and 650 employees meals per day). 3) The suggested kitchen space requirements for the foodservice facility models were 341.2 ㎡ (W 17,100mm x L 23,700mm) and 998.8㎡ (W 35,600mm x L 32,800mm) for the 300 and 900 beds hospitals, respectively, with both designs being rectangular. The space requirements for the equipment, in relation to the total operational area, in terms of ratios were 1:3.5 and 1:3.8 for the 300 and 900 beds hospitals, respectively. The recommended space allowances per bed for the developed foodservice facility models were 1.15 ㎡ and 1.11 ㎡ for the 300 and 900 beds hospitals, respectively, which were increased by more than 30% compared to those suggested in the precedent study, and considered appropriate for the implementation of the HACCP system. 4) The hospital foodservice facilities plans and models were developed based on the general sanitation standards, guidelines and the HACCP system, and included foodservice facility layout, product flow, physical separation between contaminated and sanitary areas, foodservice facility specifications with a 1/300 scale for a 300 bed, and a 1/400 scale for a 900 beds blueprint. 5) The main features of the developed foodservice facility plans and models were; physical separation between contaminated and sanitary areas to prevent cross contamination, product flow in one direction from the arrival of the raw material to the finished product, and separation of different work areas and the process of receiving & preparation of products, refrigeration & storage, cooking, assembly, cleaning & disinfection, employee areas and janitorial facilities. The proposed models from this study were presented as examples for those wanting to build, or renovate, their facility for the production of foods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.265-273
• /
• 2012

The business environment is changing rapidly because of the global crisis. In order to survive and enhance competitiveness in the global market, global manufacturing companies are trying to overcome the crisis through the convergence of production infrastructure and IT technology. The importance of systems to support the integration of manufacturing processes, collaboration in product development, and information integration of providers and producers is therefore increasing. In this paper, research is conducted on the design and implementation of a collaboration system to support a power-boat manufacturing company in this situation of increased demand for collaboration and information integration. The system was designed through product-structure and production-process analysis, support product data management, and enterprise contents management. The company involved in the power-boat development project is expected to show an improvement in productivity through the integrated management of information and collaboration provided by this system.

• International Journal of Advanced Culture Technology
• /
• v.6 no.2
• /
• pp.107-116
• /
• 2018

In the past, design has been recognized as a means to determine colors, shapes, and functions Recently, however, it has been accepted in a wider sense, namely designing the entire service, including product and user experience design. In this way, in addition to creativity and expressive power that designers have as their main competence, according to the expansion of this design object, designers are required to have comprehensive abilities in related fields and accompanying technical professional abilities. If designing as a technology application as a direction toward this situation, design education can be carried out by approaching technology as a method of expression or design subject. It can also be an effective alternative towards improving the understanding of technology. Meanwhile, many small microcontroller board products with advanced functions and multi-functional specialized programming integrated development environments (IDEs) are becoming widespread due to their open source, low cost, and scalable features. However, students in the design department who lack the basic knowledge of science and engineering have difficulties learning, which requires considerable time and is required for practical use. From this point of view, we have made advancements in the technical understanding of design education by conducting fundamental research to the effectiveness of microcontroller-based prototyping tools as means of expression. We also conducted basic education of microcontroller boards for a certain period of time on students who majored in design in conjunction with the basic survey and investigated the obstacle factors using a questionnaire. Through these surveys, we have confirmed the necessity of designing microcontroller boards of low difficulty, which simplify the coding process that can act as a barrier in difficulty for design students to apply smoothly in design education. In addition, we intend to carry out a basic study on the guideline of microcontroller design for design education and composition of education programs.

• CDE review
• /
• v.21 no.2
• /
• pp.61-64
• /
• 2015

In this paper, the FREECAD 0.14 was used for modeling conventional Selfie-stick and the newly proposed Selfie-stick design. The purpose of this paper is to demonstrate the utility of FREECAD 0.14, which is open-source and still in development for further use. After modeling the conventional Selfie-stick, CatiyaV5 was used to assemble FREECAD 0.14 drawn elements. Main issue in newly designed Selfie-stick is the portability. To improve portability of the Selfie-stick, folding mechanism was adopted from folding LED stands. Several mechanisms were adopted to improve user convenience as well. Ansys 14.0 was used for structural analyses of conventional Selfie-stick model and the newly designed model as well. Several simplifications for the models were needed to process the analyses. When analyzing the newly designed model various materials were used one by one to find compatible composition. Using Magnesium Alloy for the stick and the hand grip was found to be compatible. FREECAD was useful for suggestion of the newly designed model but not so much useful to design an actual product. Various efforts would make FreeCAD the best choice for industrial use for free as it is named.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.508-513
• /
• 2017

Maintainability in engineering terms means ease of maintenance / management of the product. Aircraft automatic test equipment (ATE) is heavily influenced by the design changes of the unit under test(UUT) since the test procedure is developed according to the function / performance characteristics of the UUT. Moreover, if the integrated ATE is an environment that checks more than one UUT, it is not easy to maintain the ATE for the UUT design changes. Developers should be able to flexibly cope with the change of development staff by selecting an easy and clear development method to improve the maintainability of ATE. It is also necessary to limit the area affected by the UUT design change to a specific range to minimize the area to be modified. In this paper, we propose ATE development method which focuses on maintenance improvement based on the aircraft ATE development process.

• Journal of Power System Engineering
• /
• v.21 no.3
• /
• pp.74-84
• /
• 2017

This paper presents the development of the underwater cleaning robot platform for a higher efficiency in manufacturing industry. Human operators directly go into the cistern and clean sludge after drainage of the water so far. It is sometimes dangerous because of the harmful chemical materials from the product making process. In addition, it takes long time for water drainage and supplying it back. However, the robot cleaning operation does not need to drain water so that it could be applied to the sludge cleaning work at any time without the plant pause. Moreover, it can prevent the safety accidents because human operators are not necessary to enter directly the sludge cisterns. This paper shows the performance of cleaning work that can be applied in the industrial field through the design and development of underwater cleaning robot platform. And these results demonstrate that the developed underwater cleaning robot has great possibilities to clean other industrial water cisterns.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.3
• /
• pp.101-110
• /
• 2008

We believe distinguishable product development to be competitive against foreign products, and realize the need to expand domestic business worldwide. In order to be competitive, we should produce fashion items that meets global taste, and at the same time contain exclusive Korean culture and emotional beauty. This article examines and creates unique textile design with the touch of Korean art. Desigus have been proceeded under the following three themes: 'Strong Ego,' 'Gorgeous Days' and 'Song Eternal Seeking Love' using Primavision Computer-aided Design ("CAD"). We have put our interestes in Korean traditional paintings called Hangukhwa. Suitable design motives had been selected and modified from the four gracious plants (bamboos, peonies etc.), and paintings of birds and flowers. Primavision, a CAD software, had been used to manipulate those desigus, and to add instant changes in color, scale, and layout. We had modified Korean traditional motives to make modem image, and had arranged layouts which can be suitable for half-drop repeat and square repeat. The use of color is essential in pattern design. Thus, we explored coloring ways for each design to meet the trends, and the final mapping had been conducted in western style of dresses. We have tried to mix Korean image of textile designs with Western clothing style, expressing hybrid in the mapping process. With global movements, we need to develop products with Korean traditional exotic taste to attract foreign consumers. Therefore, we selected symbolic motives from Korean paintings to express deep spiritual significance. We developed textile design and processed mapping on selected western designer's dress, employing current trend colors and making crossover coordination. We realized Korean painting would be an excellent source for exclusive fabric design, and tried to create a modernized design which maintains Korean ethnical identities.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.827-833
• /
• 2011

Precision forging of gears has a lot of advantages when compared to conventional gear shaping, because it allows the manufacture of gear parts without flash and consequently without the need for subsequent machining operations. In this study, the cold forging process is determined to manufacture the cold forged product for the precision clutch gear used of a commercial automobile, To do this, shape ratio of initial shape having influence the forgeability of forged product is analyzed. The optimal initial shape of clutch gear is designed using the results of DEFORM-3D and the artificial neural network (ANN). The initial shape through the detail analysis results, such as metal flow, distributions of strain can be obtained.