• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.2
• /
• pp.67-80
• /
• 2022

Recently, many laundry home appliances have been released with Internet of Things (IoT) functions, but there are few quality evaluation tests for IoT functions. In particular, since IoT test items are not prepared for laundry home appliances applied with IoT functions, it is difficult to find the cause even if defects occur, and test institutions are limited in selecting test items related to IoT and conducting proper performance tests. In this paper, we design a test item framework that separates IoT test items into commonality and variability to identify product defects and causes for laundry home appliances with IoT features among products in the field of home appliances. Through the proposed research, manufacturers and test institutions can test the proper performance of laundry products with IoT functions, which can improve the completeness of the products and ensure reliability.

• Journal of Animal Science and Technology
• /
• v.61 no.2
• /
• pp.77-86
• /
• 2019

The supplementation level of barley was limited because of high contents of fiber in monogastric animals. Barley contained high soluble fiber, thus it could prevent to diarrhea of weaning pigs. Moreover, as the barley break down by enzymes, free sugars come out from the barley, which could be used as an energy source in weaning pigs and replace milk by-products in weaning pig's diet. Therefore, present study was conducted to investigate the influence of barley to replace milk by-product in weaning pig's diet on growth performance, blood profile, nutrient digestibility, diarrhea incidence, and economic analysis in weaning pigs. A total of 112 crossbred ($[Yorkshire{\times}Landrace]{\times}Duroc$, weaned at 28 days of age) piglets were allotted to 4 treatments in a randomized complete block (RCB) design. Each treatment has 7 replications with 4 pigs per pen. Pigs were fed each treatment diet which containing different levels of barley (0%, 10%, 20%, and 30%) at the expense of whey powder and lactose. Three phase feeding programs were used for 6 weeks of growth trial (phase 1: 0-2 weeks; phase 2: 3-4 weeks; phase 3: 5-6 weeks). During 0-2 week, body weight (BW), average daily gain (ADG) and G:F ratio were decreased as barley level increased in the diet (linear response, p < 0.01). In blood profile, blood urea nitrogen was decreased as the barley level increased in the diet (linear, p < 0.01). However, no significant differences were observed in blood glucose level. In nutrient digestibility, crude fat digestibility was linearly increased as barley increased (linear, p < 0.01). The incidence of diarrhea was improved as increasing barley contents in all phases (linear, p < 0.01). These results demonstrated that supplementation of barley to replace milk by-product influenced negatively on growth performance during 0-2 week. However, the incidence of diarrhea and later growth performance from 3 week postweaning were improved as dietary barley level increased.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.305-312
• /
• 2017

This paper presents a laboratory investigation into the effects of fillers using industrial by-product such as coal ash, IGCC slag on properties of hot-mixed asphalt concrete variation with filler content. For comparison, existing mixture with lime and dust have also been considered. Marshall and flow test has been considered for the purpose of mix design as well as evaluation of mixture. Other performance tests such as indirect tensile strength test, tensile strength ratio(moisture susceptibility), dynamic stability have also been carried out variation with filler content. It is observed that the mixes with industrial by-product exhibit conform with quality standard. Therefore, it has been recommended to utilize industrial by-product based on fly ash wherever available, not only reducing the produce cost but also partly solve the industrial by-product utilization and disposal problem.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2107-2114
• /
• 2011

To carry out the evaluation of performance of railway product/system, 3 step verification process(design review-lab test-field test) should be done. In advanced countries, for the effective field test, test-only-oriented track have been constructed and used. In Korea, government announced "The construction plan of railroad test track" at 2009.06. This paper will summarize 'need of test track', 'technical meaning of test track', 'current status of foreign test track', 'fundamental plan and process strategy of Korea Railroad Test Track'. It is no need to say that the wisdom of all railroad related people is required for the successful construction and usage of Korea Railroad Test Track.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.628-632
• /
• 2006

This paper deals with the electric and thermal characteristics of the composite busbar composed of aluminum and copper. When AC current is flowing in Cu busbar used widely in conservative equipments like power cable, transformer, and switchgear & controlgear most current is concentrated on the surface of the busbar by the skin effect. Therefore, if the Cu region in the busbar having low current density is replaced with aluminum, we can largely reduce the product cost and weight of the busbar. To conform the performance of the composite busbar, we designed and fabricated a test Al/Cu composite busbar. Maximun temperature rise of the busbar was $35^{\circ}C$ when 1600 Arms of AC current was applied to the test composite busbar($120mm{\times}10mm$). Based on test results, we can expect to make the low-priced and light power equipments using the Al/Cu composite busbar.

• Transactions of Materials Processing
• /
• v.11 no.7
• /
• pp.589-595
• /
• 2002

Up to now, Collimators have been generally produced by handwork and only a few companies have produced by semi-automatic system. Under this situation, automatic system for assembly of optical collimator has risen as a most essential technique in the development of optical communication components. In this study, it was constructed to develop optical collimators with high functionality and We manufactured optical collimators with a GRIN rod lens using automatic system. Therefore, we worked a performance test through a comparison of collimators made by automatic system and handwork with angle alignment, beam size. Also we compared common product with auto-manufactured sample. As a result, it brought a reduction of the tact time and an improvement of an efficiency and a productivity of optical collimators. therefore it was found that automatic system was indispensable for materialization of optical collimators with high functionality.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.65-67
• /
• 2014

There are many elastomeric joint sealant applications in construction such as structural glazing, weatherproofing and insulating glass fabrication etc. Each sealant joints require unique durability functions to perform well through building life cycle. Elastomeric joints in bathroom and kitchen is one of areas which require durable sealing. In this application, anti fungal durability is proprietary function of sealant during building life cycle. Premature failure of anti fungus resistance of sealant is putting big stresses to general contractor as well as the inhabitants due to costly rework and poor sanitation. Accordingly, when chemists design a product, they must take into account various parameters not only formulation components also test conditions in order to have long term fungal durability. This paper reviews several biocide options with various industry standards for fungus resistance performance to suggest making new test method for construction sealant industry.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.278-281
• /
• 2005

Today, manufacturing capability at the micro or nano scale production field is requested strongly in view of parts and product miniaturization. Miniaturized parts and products will introduce lots of benefits in terms of high precision functionality and low energy consumption. This paper presents the results of micro milling machine tool development for micro machining process. Finite element analysis has been performed to know the relationship between design dimensional variables and structural stiffness in terms of static, dynamic, thermal aspects. Performance evaluation through machining has been tested and discussed for achievable machining characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.610-619
• /
• 2016

Digital manufacturing (DM) technology helps engineers design products promptly and reliably at low production cost by simulating a manufacturing process and the material behavior of a product in use, based on three-dimensional digital modeling. The computing infrastructure for digital manufacturing, however, is usually expensive and, at present, the number of professional design engineers who can take advantage of this technology to a product design accurately is insufficient, particularly in small and medium manufacturing companies. Considering this, the Korea Institute of Science and Technology Information (KISTI) and H University is operating a DM track in the form of Industry-University-Research Institute collaboration to train high-performance-computing-based DM professionals. In this paper, a series of courses to train students to work directly into DM practice in industry after graduation is reported. The operating cases of the DM track for two years since 2013 are presented by focusing on the progress in establishment, lecture and practice contents, evaluation of students, and course quality improvement. Overall, the track management, curriculum management, learning achievement of students have been successful. By expediting more active participation of the students in the track and providing more internship and job offers in the participating companies in addition to collaborative capstone design projects, the track can be expanded by fostering a nationwide training network.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.3
• /
• pp.111-121
• /
• 2009

Value Engineering(VE) at design phase(so-called Design-VE) becomes quite a compulsory solution for better customer satisfaction, cost reduction, higher product performance, and, eventually, insured predominance in the competition. Unlike intended, however, the customer requirement on Design-VE has not been fully reflected in reality. Furthermore, the Design-VE occasionally does not progress in regular sequence; Preparation for measuring customer requirement - Function analysis - Idea creation. Therefore, this study suggests Axiomatic Design Theory to be adopted in Design-VE process expecting that the functions required by the customer could systematically reflected in VE process. Post-occupancy Evaluation(POE) is also represented as a method to measure and arrange the customer requirements. The customer satisfaction Design-VE process creates ideas defining functions in more detailed, to reflect the concrete user requirement. This approach helps function analysis and idea creation linked closely because function and idea are developed zigzag (i.e. function - idea - function...) in being decomposed into level down. The application of the process proposed by this study will be helpful to improve the customer requirement measurement and clarify a link between functions and ideas.