• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1291-1296
• /
• 2013

Risk-based inspection (RBI) is a well-known method that is used to optimize inspection activities based on risk analysis in order to identify the high-risk components of major facilities such as power plants. RBI, when implemented and maintained properly, improves plant reliability and safety while reducing unplanned outages and repair costs. Risk is given by the product of the probability of failure (POF) and the consequence of failure (COF). A semi-quantitative method is generally used for risk assessment. Semi-quantitative risk assessment complements the low accuracy of qualitative risk assessment and the high expense and long calculation time of quantitative risk assessment. The first step of RBI is to identify important failure modes and causes in the equipment. Once these are defined, the POF and COF can be assessed for each failure. During POF and COF assessment, an effective inspection method and range can be easily found. In this paper, the calculation of the POF is improved for accurate risk assessment. A modified semi-quantitative risk assessment was carried out for boiler facilities of thermal power plants, and the next maintenance schedules for the equipment were decided.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.484-488
• /
• 1997

Fission product release (FPR) assessment for 100% reactor outlet header (ROH) break in CANDU reactor loaded with CANFLEX-NU fuel bundles has been performed. The predicted results are compared with those for the reactor loaded with standard 37-element bundles. The fuel failure thresholds for the CANFLEX and standard bundle elements are very similar. All the sheaths at the corresponding fuel failure thresholds for the CANFLEX and standard bundles fail due to the significant cracks in the surface oxide, except those for the CANFLEX inner element at burnups of 220 to 240 MW.h/kg(U), which fail due to the excessive diametral strain. The fuel failure analysis predicts that the number of failed fuel elements for the CANFLEX bundle case is none, while that for the standard bundle case is 1827. The total (gap plus bound) I-131 releases for the CANFLEX and standard bundles are none and 5889 TBq, respectively The significant reduction of the number of failed fuel elements and FPR for the CABFKEX fuel bundle is attributed to the lower linear power of the CANFLEX fuel bundle compared with the standard fuel bundle.

• Journal of Technologic Dentistry
• /
• v.40 no.3
• /
• pp.151-162
• /
• 2018

Purpose: The main purpose of this study is to develop assessment measures for the quality of service for dental labs. Methods: In order to construct the measure of service quality assessment for dental labs, relevant modifications were extracted around theoretical studies, and the survey was conducted on dental technician workers through internet survey. final scale questions were extracted through exploratory factor analysis and confirmed factor analysis of measurement variables, the demographic characteristics of the subjects and the perceptual difference of dental labs were analyzed for the extracted variables. Results: The final five variants of the interactive factor analysis that include the ability to change employee growth, reliability, responsiveness, materiality, interoperability, confirmatory factor analysis excludes variations in employee growth wages, welfare benefits, by changing its name to network capabilities, the quality of service factors for the final dental labs consisted of five variations: network competence, reliability, responsiveness, materiality and interoperability. Conclusion : The service quality of the dental labs showed that the reliability of the product related to the dental materials and the product production responsiveness related to the production order, the Materiality of the materials and equipment of the dental labs, the Interoperability responsiveness related to dental orders, And the importance of network capability to form a mutual network.

• Journal of Korea Trade
• /
• v.26 no.6
• /
• pp.61-82
• /
• 2022

Purpose - This study analyzed the effect of obtaining international products and qualification certification on exports according to the suitability evaluation system. Recently, non-tariff barriers have emerged as technical barriers, and the Biden administration is trying to achieve export growth and economic growth by utilizing the demand for conformity assessment following the Fourth Industrial Revolution and the free trade system from the perspective of Korea. Design/methodology - This study analyzed the effect of a manufacturer's product certification acquisition on a company's export performance using Resource-Based View-based multiple regression analysis. To this end, concentration validity was confirmed through Factor analysis and Cronbach's alpha, and correlation analysis was performed to verify discriminant validity. Findings - Product certification and qualification have a positive impact on the company's export performance. In particular, technological dynamism and relationship control have had a significant impact. Originality/value - Considering that the Conformity Assessment Management Act will take effect in earnest in 2022, this study is believed to suggest that companies that have been certified to meet international standards may improve their export performance and increase their value in the future. International market.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.137-148
• /
• 2022

Recently, in the concrete industry, the development and commercialization of low-carbon products of ready-mixed concrete have emerged as part of the efforts to realize carbon neutrality. This study aims to investigate the current status of environmental product declaration(EPD) of ready-mixed concrete and to analyze the characteristics of carbon emissions by compressive strength, life cycle stage, and region. To this end, the related certification system requiring the calculation of carbon emissions in the concrete industry was analyzed. The target of analyzing the current status of carbon emissions was set as a product of ready-mixed concrete that acquired EPD certification based on the life cycle assessment method. In addition, the trend of carbon emissions according to each characteristic was reviewed by analyzing carbon emissions by the life cycle of ready-mixed concrete products, analyzing carbon emissions by standard, and analyzing carbon emissions by region. As a result, the carbon emissions in the pre-production stage were 99% compared to total carbon emissions., and as it increased from 18MPa to 40MPa, carbon emissions also increased. Even with the same specifications, the carbon emissions in the capital region were higher than in the southern region.

• Explosives and Blasting
• /
• v.41 no.4
• /
• pp.9-16
• /
• 2023

To compare the global warming impact of the TBM and NATM method, which are representative tunnel excavation methods, a life cycle assessment was performed for each method. Life cycle assessment should compare the sum of carbon emissions by considering the pre-manufacturing stage, product manufacturing stage, usage stage, and disposal stage. However, access to TBM (Tunnel Boring Machine) manufacturing and disposal data is limited, so I had no choice but to focus on the analysis for the usage stage. In general, carbon emissions during the pre-product manufacturing stage and product manufacturing stage often exceed 90% of carbon emissions throughout the entire process. Therefore, since it is difficult to achieve the analysis goal only by comparing the usage stage, the analysis scope was expanded, and carbon emissions for the process were calculated for the NATM method with access to manufacturing data. As a result of comparing the relative impact on global warming, the carbon emissions of the TBM method were found to be higher than those of the NATM method even though TBM method was only considered for the usage stage. So there it is, the NATM method can be seen as environmentally friendly in the future when considering the impact of climate change (global warming), which has recently attracted attention among environmental impact fields.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.6
• /
• pp.49-62
• /
• 2018

The purpose of this study is to develop an assessment index for the selection of promising start-ups, which will enhance the efficiency of program that support start-ups. In order to develop assessment models for selecting start-ups, three major research steps were conducted. First, this study attempted to theoretically redefine the assessment index from the perspective of the Balanced Scorecard (BSC) through a literature review. Second, major assessment index were derived using Delphi technique for experts in start-up areas. Third, weights were derived by applying AHP technique to calculate the importance of each index. The results of this study are summarized as follows. First, this study attempted to apply the assessment model for selecting start-ups from the Balanced Scorecard (BSC) view through the previous study review. Second, the final major questions were derived with sufficient opinions collected and structured survey of leading start-up experts in areas related to research subjects and elicited the most representative questions. Third, the results of applying the weights of the main selected assessment index, commercialization viewpoint is the most priority, followed by market view, technology development viewpoint, and organizational capability viewpoint. In the middle section, th ability to make products in the commercialization viewpoint, market competitiveness in the market, product discrimination capacity in the technology development perspective, and the ability of the entrepreneur in the organizational capacity perspective were important. Overall important items were found to be in the order of the capabilities of entrepreneurs, market competitiveness, product fire capability, and product discrimination. The importance of small items was highest priority for comparative excellence of competing products, and the degree of marketability, capacity of entrepreneurship, ability to raise capital, desire for entrepreneurship, and passion were shown. The results of this study presented a conceptual alternative to the preceding study on the development of existing selection assessment indexes. And it provides meaningful and important implications as an attempt to develop more sophisticated indicators by overcoming the limitations of empirical research on only some of the evaluation metrics.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.97-104
• /
• 2007

In this paper, we have proposed an integrated aircraft development environment which can support virtual design and development for Systems Engineering and IPPD(Integrated Product and Process Development). We have also proposed the ViMS(Virtual Mockup System) which can perform a system design review on an integrated aircraft development environment. The ViMS is an integrated virtual design support system with immersive design review functionality to make a virtual mockup instead of a physical mockup through the virtual reality technology. The functionality of the ViMS consists design data management, design technology, design verification, and design assessment. We have described the detailed development artifact, case studies and conclusions of using the ViMS functionality.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.4
• /
• pp.621-628
• /
• 2010

Quality assurance data is used to develop the strategy of the product since it is valuable for reliability assessment of the product. However, manufacturers don't take into account the life of the product but just produce WCR (Warranty Call Rate) which is monthly or quarterly claims per 1000 products in terms of table or graph. In this study we will consider how they analyse that kind of data and suggest an appropriate type of analysis which incorporates the life time of the product. Finally we emphasize that the appropriate type of analysis has to be merged into the.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.373-382
• /
• 2015

Purpose: In this paper, we developed a reliability index (RI) to efficiently compare reliability of products based on the design, development and production information such as reliability tests, quality, product life-cycle management. RI also can be applied to reliability prediction of a novel product as well as comparison evaluation among existing products. Methods: For evaluating RI, we proposed evaluation process which is composed of five steps. Target modules are selected based on warranty data and correlation analysis. Scores of selected target modules are calculated by scoring function. Finally, weights of RI model are determined by optimization method. Results: This paper presented an empirical analysis based on failure data of mobile devices. In this case study, we demonstrated that there is a direct correlation between evaluated RI and field failure probability of each product. Conclusion: We proposed the index for comprehensive and effective assessment of product reliability level. From the procedure of this study, we expected to be applied for reliability estimation of novel products and deduction of field failure-related factors.