• Industrial Engineering and Management Systems
• /
• v.14 no.2
• /
• pp.159-174
• /
• 2015

Remanufacturing used, end-of-life products is a complex problem involving multiple types of products that may share common parts. Recovery targets assigned by market demand and environmental legislation add more difficulty to the problem. Manufacturers now need to achieve specified take-back and recovery rates while fulfilling demands for remanufactured products. To assists in the demand- and legislation-driven remanufacturing of a family of products (i.e., multiple products that share common parts), this paper introduces a bi-objective mixed integer linear programming (MILP) model for optimizing remanufacturing. The model identifies optimal remanufacturing plans for a product family, whereby, the remanufacturer can achieve demand and recovery targets more profitably and in an environmentally-friendly manner. The model can also be used to quantify and justify the economic and environmental benefits of a product family from a remanufacturing perspective. A case study is presented for remanufacturing an alternatorfamily of products.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.335-338
• /
• 2004

Life-Cycle Engineering(LCE) is a decision-making methodology that considers environmental and cost needs during the product life-cycle. Environmental conscious design and manufacturing has become more and more important and it has been enforced by governmental regulations and used as trade restriction. LCE involves integrating environmental consideration into new product development including design, material selection, manufacturing processes and distribution of the product to the consumers, plus the end-of-life management such as disassembly, material recovery, remanufacturing of the product after discarding it. In this paper, a state-of-the-art survey of LCE is presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.99-112
• /
• 2014

This paper addresses an assessment model for selecting PL(Private Level) product companies. The proposed model extracts the weights of evaluation elements based on AHP(Analytic Hierarchy Process). These evaluation elements are from real-world instances in a domestic hyper market. Especially, the model points at food products which constitute a large portion of entire profits in the market. In this model, we first classify the 54 evaluation elements into 4 layers and secondly carry out a survey with relevant specialists based on them. We also estimate the weights of evaluation elements according to pairwise comparisons from the survey, and propose them as a quantitative alternative which can be applied in real-world problems. Finally, the pilot-study is conducted to compare the proposed model with the existing simple summation method. From this study, HACCP system assessment and Review(0.279281), Transportation(0.117706) and Fundamental law observance(0.066392) are presented as the key evaluation elements for selecting PL product companies. The proposed model facilitates the company selection among those candidate companies which is not easy to determine the superiority by reflecting the importance of evaluation elements.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.33-40
• /
• 2008

Accuracy of dietary assessment depends on correct estimation of quantity as well as correct data on composition of the products. Milk and soymilk were considered quite homogeneous in items of package size and composition. One serving size of fluid milk and soymilk is considered 200 mL but there are products with different amounts on the market. This study was conducted to investigate variations of amounts and composition of fluid milk and soymilk products of one portion siz on Korean market. Twenty-nine milk products were purchased and categorized into 8 groups-regular, low-fat, skim, chocolate, strawberry-flavored, banana-flavored, and black soybean-added. Sixteen fluid soymilk products were purchased and categorized into 4 groups-regular, infant, black sesame or black soybean added and others. Actual volume of each product was measured by mass cylinder and compositions of major nutrients on the package were compared to the values in the most widely used nutrient DB in Korea. Amounts of milk specified on the package of purchased products were 182.3-318.5 ml, the largest being banana-flavored milk. Amounts of soy milk were 184.3-240.5 mL, the largest being regular soymilk. Measured amount of each products were close to the amount on the package (<5%). Contents of macronutrients on the package were different from the food composition table in several products. The amounts of calcium varied greatly among the products due to the popularity of adding calcium to milk and soymilk products recently. These variations in the amount and contents of major nutrients in milk and soymilk products can lead to considerable error to the results of dietary assessment unless the amount and the composition of each product are regularly updated in the food composition table whenever the new products are introduced in the market.

• Research in Mathematical Education
• /
• v.14 no.3
• /
• pp.281-297
• /
• 2010

This paper pretends to study the potentialities of feedback, particularly in the development of a written report in two phases and in portfolio; and the main difficulties that teachers has to face concerning this assessment practice. Through a meta-analysis concerning different studies, it is possible to say that oral or written feedback, intentionally provided to students of several ages, may enable them to develop their self-assessment capacity and to get close of the expected product. However, the type of student and his or her perceptions may influence the effectiveness of feedback. Even for experience teachers, this practice maintains complex.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.301-306
• /
• 2001

Applying life cycle assessment in PCB (printed circuit board) production, most of environmental impacts come from outside-factory-process due to power generation, especially, and other raw material productions. Relatively, small environmental impacts of inside-factory-process make it difficult to compare them. To overcome this problem allocating environmental impacts of outside-factory-process on inside-factory-process. It helps to identify the environmental impacts of each process and find sources of environmental impacts. Also, life cycle assessment shows reduction of environmental impacts after copper recycling process.

• Nuclear Engineering and Technology
• /
• v.46 no.6
• /
• pp.875-882
• /
• 2014

In terms of safety and the efficient management of spent fuel storage, detecting failed fuel is one of the most important tasks in a CANada Deuterium Uranium (CANDU) reactor operation. It has been successfully demonstrated that in a CANDU reactor, on-power failed fuel detection and location systems, along with alarm area gamma monitors, can detect and locate defective and suspect fuel bundles before discharging them from the reactor to the spent fuel storage bay. In the reception bay, however, only visual inspection has been used to identify suspect bundles. Gaseous fission product and delayed neutron monitoring systems cannot precisely distinguish failed fuel elements from each fuel bundle. This study reports the use of a sipping system in a CANDU reactor for the integrity assessment of spent fuel bundles. The integrity assessment of spent fuel bundles using this sipping system has shown promise as a nondestructive test for detecting a defective fuel bundle in a CANDU reactor.

• Journal of the Korean Society of Safety
• /
• v.25 no.5
• /
• pp.27-32
• /
• 2010

This study is to investigate and compare domestic hazardous toys with harmful substances with foreign toys so that we can find out management criteria for in cognitive infants. Actually, commercially used toys have been collected and tested to find out more effective management standard. it is tried to produce evaluation criteria of environmentally harmful substance but variety of product is needed for overcoming actual barrier due to lot of difficulty huge cost, time, objectiveness. Therefore, This study does not cover all the above. Establishment of evaluation criteria for product harmfulness made by Government or Local government should be continued to improve. Foreign reference material for toy product in Europe, USA, Japan have been investigated and domestic product have been collected and tested for containing heavy metals, formaldehyde, phthalate in the study. All the test have been made in accordance with KSM ISO 2124 to measure heavy metal transfer into body. Toy product used for the study have been purchased in the real market and some of them contains harmful elements with over standard. Post management system such as RAPEX to control periodically should be established for plastic toy with low quality product.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.327-340
• /
• 2015

Purpose : Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat uniforms' defects and 40mm ammunition explosion accident. To address these problems, Defense Agency for Technology and Quality(DTaQ) introduced new systems such as Manufacturing Readiness Assessment(MRA), Test Report Information System(TRIS) and so on. However, these activities require the human and time resources which cannot be increased in short period. In this paper, we suggest more practical and efficient product examination method. Methods : The most popular and widely used government's quality assurance technique is a sampling method to examine the product. In this research, we first reviewed the DTaQ's quality assurance regulation, then identified several possible problems and finally suggested more efficient and effective sampling plans. Results : We have suggested new sampling framework and evaluated its performance on two military supplies by comparing with other sampling method, and observed that the number of tested samples can be substantially reduced. Therefore, required quality assurance time can be saved. Conclusion : In this paper, we first reviewed the product examination frameworks of DTaQ, PPQMS and DCMA. Then we identified several possible problems which can cause the loss of objectivity and time. To handle these problems, we suggested the new product examination framework and tested the framework to verify the performance.

• Korea Trade Review
• /
• v.44 no.6
• /
• pp.135-150
• /
• 2019

Under the Manufacturing Liability Act, consumers want to be protected from manufacturers by mitigating burden of proof as an important target to be protected. However, due to the complexity of the product, it is very difficult for consumers to prove defects from the manufacturing defect. This situation has led to a major revision of the Manufacturing Liability Act, which mitigates the burden of proof of consumers by applying fruitless liability. The Manufacturing Liability Act is comparable to the U.S., which has strong consumer rights and is protected by the Manufacturing Liability Act. The burden of proof can be regarded as the most necessary content for consumers within the manufacturing product liability law when responding to manufacturing defects. The U.S. intends to provide implications for achieving consumer protection in Korea's Manufacturing Liability Act by imitating the U.S. based on the burden of proof. Case comparison regarding burden of proof can be conducted based on various criteria, including criteria for each product and key features for determining the importance of the manufacturing product liability law. The Act on the Responsibility of Korean Manufacturing Products for the Protection of Consumers was developed based on the assessment criteria, and a remedy was proposed to protect consumers who suffered from manufacturing defects.