• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.827-833
• /
• 2017

This study was investigated the effects of various commercial sanitizers on microbial characteristics in fresh-cut iceberg lettuce during storage. For screening sanitizer, lettuce was cut and dipped in chlorine water ($0.2ml{\cdot}L^{-1}$), solution of organic acids such as ascorbic acid, citric acid, acetic acid, mixture of ascorbic acid and acetic acid (1-6%), and solutions of commercial sanitizers such as Formula 4$^{TM}$ (1,3,4%), Fresh produce wash$^{TM}$ (1,3,4%), Cleancol$^{TM}$ (1%), Chitochol$^{TM}$ (1%) and Natural Ca$^{TM}$ (0.1%) for 3 min, respectively. Washing lettuce with selected sanitizers resulted in reduction of aerobic bacteria of more than 2 log CFU/g. Initial pH of lettuce was related with the pH of sanitizers. pH ranged from 4.7 to 6.1 in Formula 4 (4%, pH 1.7) and Natural Ca (0.1%, pH 12.0), respectively. Chlorine water showed consistent and significant inhibition effect in all of microorganisms except total coliform. Over 3% of Formula 4 and Fresh produce wash were found to have high bactericidal activity among sanitizers. The sanitizers of chlorine water, Fresh produce wash, Chitochol and Natural Ca were effective in reducing yeast and mould populations. As coliform and E. coli, Formula 4 (4%) showed the highest bactericidal activity. The bactericidal effect of commercial sanitizers during storage varied with the kinds and concentrations of tested sanitizers. Although inhibition effect was not showed during storage, these results suggest that commercial sanitizers could be an alternative to chlorine for washing fresh-cut produce.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.266-276
• /
• 1996

Numerous factors are known to affect the accuracy of elastomeric impression materials. Factor often overlooked is the quality of the bond between putty and wash during corrective reline impression technique. The putty-wash bond strength must be strong enough to over-come the local stress at putty-wash interface. It is not always possible to avoid saliva contamination in making corrective wash impres-sion. And putty preliminary impression material con be used as a template for provisional restoration. Human saliva and the residual monomer of autopolymerizing acrylic resin are thought to affect the bond strength and the failure type. This study examined the effect of contaminants like human saliva, and residual resin monomer on the putty-wash bond strength and the effectiveness of treatment. 1. Of the tested three brands of Vinyl Polysiloxane impession meterial, Express Exhibited the greatest bond strength followed by Eamix and Perfect showed the lowest putty-wah bond strength. 2. Coating the putty substrates with human saliva did not produce decreased failure load in all the breands of Vinyl Polysiloxane impression meterail. 3. Of the three brands of VPS impression material that were exposed to methhylmethacry-late resin(Jet), only the putty-wash bond strength of the Perfect group diminished signifi-cantly. Moreover, all the specimens from group C of Perfect exhibited adhesive failure. 4. Exposing the substrates to ethylmethacrylate resin(SNAP. diminished the putty-wash bond strength significantly. With Perfect and Examix, failure occurred cohesively through the light-body, whereas with Express, failure occurred adhesive-cohesively. 5. Removing approximately 1mm thickness of the contaminated putty interface was the most effective treatment in countering the undesirable effect caused by residual resin monomer. The putty-wash bond strength of the groups that were treated with 1mm even putty reduction was not significantly different from those of control groups. With Perfect and Examix, cleaning the specimens with gauze soaked in 70% isopropyl alcohol increased the putty-wash bond strength, but was not as effective as 1mm even reduction of contaminated putty substrates. With Express, 70% isoproryl alcohol treatment exhibi0ted comparable putty-wash bond strength to that of control group.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.9
• /
• pp.1491-1497
• /
• 1997

The purpose of this research is to improve the surface roughness of cast-iron pipe porduced by the centrifugal casting. A twin-fluid atomizer of mold-wash slurry is designed for this project. New atomizer is equipped with the existing manufacturing facility to produce pipes. Cast-iron pipes (.cent.125*L3000mm) are produced and the surface roughnesses of those are analysed by UBM. The average surface roughness of new products is 6.7.mu.m while the old products of sand-resin coating method have 17.0.mu.m of average surface roughness. The surface roughness of cast-iron pipe is improved very much than before.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.191-199
• /
• 2000

Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined the impression quality in clinical condition and the wettability of impression and die material. Four commercially available addition silicone impression material (Express, Examix, Contrast, Perfect) and three die materials (Die-Keen, Vel-Mix, Fuji-Rock) were studied. A total of 50 putty/wash and heavy body/wash impressions of wet intact permanent molar teeth were examined for definition of the gingival sulcus reproduction and then classified in quality ranking. The percentage of the sulcus reproduction ability of each material was calculated from the sulcus depths of cross-sectioned epoxy resin casts from the impressions and clinically measured sulcus depths, The same impression materials were used to produce 3 groups of die stone casts form void entrapment die had been exposed to milk. Voids in the impression body and stone casts ere counted under a stereoscopic microscope. From the experiment, the following results were obtained : 1. Sulcus reproduction ability of additional silicone impression material were diminished in order of Express, Examix, Perfect, Contrast. The significant difference was found between Perfect and other material. Heavy body/wash combination was superior In putty/wash method n Perfect impression material. 2. In direct observation, Contrast showed least void in impression body but correlations ere not found between sulcus reproduction and void production. 3. In void entrapment laboratory test, wettability were diminished in order of Examix, Contrast, Express, Perfect. Clinical impression recording seems not to correlate with laboratory test. 4. The wettability of die material to impression material was not different in Express, Examix, Contrast. But, in Perfect, Die-Keen had superior wettability to others.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.622-632
• /
• 2005

Statement of problem: Silicone Index Tooth Tray impression system which does not use gingicord has a shortcoming. It takes time to remove internal wall of Silicone Index Tooth Tray for space of wash impression material. Purpose: This study was to evaluate whether providing certain space to impression body can prevent from doing complicated laboratory work. Material and methods: After mounting metal dies with shoulder and chamfer margins arbiturarily, SITT was produced using $Blu-mousse^(R)$. In one experimental group, wash impression was taken using $Fit-tester^(R)$ without removing interior surface of SITT and in the other group, wash impression was taken using $Fit-tester^(R)$ providing 0.5mm space in the SITT and then compared the differences in two groups. Results: 1. There was no significant difference between a group which did not allow space and a group which granted equal 0.5mm space. 2. There was no significant difference between gingival diameter, occlusal diameter of metal die that has shoulder margin and gingival diameter, occlusal diameter of metal die that has chamfer margin. 3. There was no significant difference between a group which did not take pick-up impression and a group which took pick-up impression through relining method using SITT 4. There was no significant difference between a group that poured immediately after taking primary impression and a group that poured after removing poured stone die. Conclusions: When taking an impression of an abutment using SITT impression system, it is considered to obtain clinically identical results between a group that did not grant a 0.5mm space within SITT for wash impression and a group which invest a space. Furthermore, it is considered possible to produce an individual die through secondary pouring.

• Food Science and Preservation
• /
• v.14 no.1
• /
• pp.54-60
• /
• 2007

Little information exists on how wash operations affect water quality, or the efficacy of sanitizers on vegetable quality and microbial reduction in fresh-cut carrot shreds. This study evaluated the efficacy of chlorine and ozone in reducing microbial loads and maintaining vegetable quality of carrot shreds. Fresh-cut carrot shreds were teated with various chlorine and ozone concentrations for differing times. The samples were then centrifuged to remove excess water, packaged in film, and stored at $5^{\circ}C$. The result indicated that varying the ozonated water wash time affected microbial growth the development of unpleasant odors, color, and the overall quality of carrot shreds. Ozonated water washing for 20 min maintained vegetable quality by inhibiting unpleasant odors, the development of whiteness, and by reducing microbial populations. A single chlorine water wash was effective and resulted in better vegetable quality when compared with two washes. Samples washed for 20 min in ozonated water, however, had better vegetable quality and smaller microbial counts compared to samples washed once in chlorine water A 20 min ozonated water wash is an attractive method for the maintenance of vegetable quality and shelf-life in fresh-cut carrot shreds.

• The Journal of the Korean dental association
• /
• v.41 no.1 s.404
• /
• pp.35-41
• /
• 2003

Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined theimpression quality in clinical condition and the wettability of impression material. Three commercially available addition silicone impression material (Imprint; 3M, USA, Examix; GC, Japan, Perfect; Handae, Korea) were studied. A total of 90 putty/wash impressions of semi-dried premolars and wet molar teeth were examined for void production in impression body. The percentae of the sulcus reproduction ability of each material was calculated from the sulcus depths of cross-sectioned casts from the impressions with stereomicroscope. Three impression materials were used to produce die stone casts from vcid entrapment die. Voids in the stone casts were counted with the stereomicroscpe. From the experiment, the following results were obtained: 1. In direct observation, Imprint showed greatest numbers of void in impression body (P<.001).However, correlations were not found between sulcus reproduction and void production. 2. Sulcus reproduction ability of additional silicone impression material was diminished in order of Imprint, Examix, Perfect. The significant difference was found between Imprint and other material (P<.001). 3. In void entrapment laboratory test, void productions was diminished in order of Examix, Imprint, Perfect. All voids in casts were less in delayed poured cast than immediately poured cast. 4. Especially, the stone pouring time of Perfect impression material should be delayed.

• Journal of the Korean Society of Costume
• /
• v.58 no.4
• /
• pp.99-112
• /
• 2008

The aim of the study was to look into the construction methods of historical corsetry and compare them with the construction methods of corsetry today. Through a comparative study, it was concluded that the design, material, sewing and functions of corsetry of a certain period are sum of the clothing techniques and fashion of the time. Corset was first appeared at the end of the 16th century. It has been through many changes in terms of items, materials, patterns, sewing methods in order to make right silhouettes of the time. Now corsetry has been developed into various items such as waist nipper, all-in-one, nipper bra, and girdle. All these items have a common purpose, that is to improve the body shape. The corsetry of the past was made of non stretchable materials, so they used to restrict body movements, and required individual fitting several times. Due to the development of thin durable stretchable fabrics, functional bones, and advanced sewing machines, construction methods of seam, hem and opening are simplified compare to their predecessors. Consequently corsetry became less weighted, easy to wear, easy to wash and easy to mass produce. Yet they have consistency in sewing techniques such as using bones or wires to support bodice shape, using durable twill fabrics over plain for attractive body shapes.

• 보존과학연구
• /
• s.20
• /
• pp.121-137
• /
• 1999

Among pigment used at work of Dan-Chung, Emerald Green is specific illuminating fluorescent light of green. It is very difficult to change other organic or inorganic pigment. All of the internal high class pigment has rare light. But Emerald Green is superior to fresh color and stability out of industrial chemical products. It forms over 50% of quantity and importance of a pattern painting. Emerald Green prohibited to produce because of its toxicpollutants, so required to changing pigment development. It is characterized to excellent color, convenient work, economical, against-sunlight, against-air pollutant and durability. The result of a test is follows; 1. We are investigated into producing internal natural Emerald Green, import external pigment and industrial synthesis method etc. but unable to buy because of its toxic pollutant. 2. We are made six samples by yellowish and green is hpigment mixing. We tested on against sunlight and air pollutant. The best mixing ratio is follows. Titanium Dioxide R760 : 18g- Chalk, White Wash : 10g- Permanent Yellow : 7g- Cyanine Green : 8g- Chrome Yellow : 3g- Resin(Vehicle) : Acryl Emulsion(Styrene + 2-Ethyl HexylAcrylate + Methyl Meth Acrylate) 8%

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.128-140
• /
• 2016

In this study, dyeability of Urtica Dioica L. extract, which is relatively less studied, was measured. The extract of this plant was used to dye cellulose and protein fiber to check its usage as a natural green dye. Three different methods were used to produce extract. Dried Urtica Dioica L. was extracted with 100% ethanol, 50% ethanol with 50% distilled water and 100% distilled water. Then dyeing solution was obtained by blending with distilled water at 1-to-1 ratio. The maximum dyeability was obtained when 100% ethanol extract of dried Urtica Dioica L. used to dye fabrics at 60 degrees celsius for 60 minutes without mordant treatment. Cotton, rayon, wool and silk were dyed and dyeability for each fiber was measured for color difference value then compared to its control. The results show that dyeability of rayon and dyeability of wool are stronger, and that when color position for each mordant is measured, color difference is most diverse on cotton with pre-mordant treatment. Color fastness to wash, perspiration and rubbing crockmeter were superb, but color fastness to light was low, therefore, additional study on this is needed to improve. Urtica Dioica L. is now expected to be used practically as green color dye as well as medicinally and edible.