• 한국식품저장유통학회지
• /
• 제24권6호
• /
• pp.827-833
• /
• 2017

시판 살균제의 실제 적용 시 감균 효과를 조사하기 위해 양상추를 신선편의 가공하고, 세척 시 살균제로 이들을 적용한 후 저장 중 pH 및 일반세균, 효모, 곰팡이, 대장균, 대장균군의 변화를 조사하였다. 살균제 스크리닝 결과, 0.02%의 염소수 처리 시 3.1 log 감소를, 1% 농도에서 acetic acid는 2.4 log, ascorbic acid는 1.3, citric acid는 0.7 log의 감균 효과를 나타내었다. 시판 중인 살균제 대부분에서 2 log 의 감균 효과를 나타내어, 이들을 신선편의 양상추에 적용하고 $10^{\circ}C$에 저장하면서 양상추의 pH 변화 및 미생물의 변화를 조사하였다. 저장 초기 양상추의 pH는 살균제 용액의 pH에 따라 변화하고 있었는데, 용액의 pH가 가장 높은 칼슘제제(12.0)가 6.1, 가장 낮은 Formula 4(4%, pH 1.7)에서 가장 낮은 pH(4.7)로 나타났으며 저장일 경과에 따라 pH는 유의적으로 증가하고 있었다. 대장균군을 제외하고 0.02%의 염소수가 가장 높은 수준의 미생물 저해 효과를 나타내었다. 반면 Formula 4, Fresh produce wash 모두 3% 이상에서 미생물 저해 효과가 나타나고 있었다. 특히 Formula 4는 대장균 및 대장균군 저해 효과가 매우 좋았다. 모든 처리구에서 곰팡이는 검출되지 않았으며 효모의 경우 염소수와 Fresh produce wash 및 알코올 살균제 중 키토콜과 칼슘 제제 처리구가 효과적으로 저해하고 있었다. 시판 살균제에 따라 미생물 저해 효과는 다르게 나타나고 있었으나 염소수와 비교했을 때 초기 미생물 저해 효과는 존재하고 있기 때문에 부가적인 hurdle technology 및 공정관리를 통해 저장 중 항미생물 효과를 지속시킨다면 실제 적용이 가능할 것으로 판단된다.

• 대한치과보철학회지
• /
• 제34권2호
• /
• pp.266-276
• /
• 1996

Numerous factors are known to affect the accuracy of elastomeric impression materials. Factor often overlooked is the quality of the bond between putty and wash during corrective reline impression technique. The putty-wash bond strength must be strong enough to over-come the local stress at putty-wash interface. It is not always possible to avoid saliva contamination in making corrective wash impres-sion. And putty preliminary impression material con be used as a template for provisional restoration. Human saliva and the residual monomer of autopolymerizing acrylic resin are thought to affect the bond strength and the failure type. This study examined the effect of contaminants like human saliva, and residual resin monomer on the putty-wash bond strength and the effectiveness of treatment. 1. Of the tested three brands of Vinyl Polysiloxane impession meterial, Express Exhibited the greatest bond strength followed by Eamix and Perfect showed the lowest putty-wah bond strength. 2. Coating the putty substrates with human saliva did not produce decreased failure load in all the breands of Vinyl Polysiloxane impression meterail. 3. Of the three brands of VPS impression material that were exposed to methhylmethacry-late resin(Jet), only the putty-wash bond strength of the Perfect group diminished signifi-cantly. Moreover, all the specimens from group C of Perfect exhibited adhesive failure. 4. Exposing the substrates to ethylmethacrylate resin(SNAP. diminished the putty-wash bond strength significantly. With Perfect and Examix, failure occurred cohesively through the light-body, whereas with Express, failure occurred adhesive-cohesively. 5. Removing approximately 1mm thickness of the contaminated putty interface was the most effective treatment in countering the undesirable effect caused by residual resin monomer. The putty-wash bond strength of the groups that were treated with 1mm even putty reduction was not significantly different from those of control groups. With Perfect and Examix, cleaning the specimens with gauze soaked in 70% isopropyl alcohol increased the putty-wash bond strength, but was not as effective as 1mm even reduction of contaminated putty substrates. With Express, 70% isoproryl alcohol treatment exhibi0ted comparable putty-wash bond strength to that of control group.

• 대한기계학회논문집A
• /
• 제21권9호
• /
• pp.1491-1497
• /
• 1997

The purpose of this research is to improve the surface roughness of cast-iron pipe porduced by the centrifugal casting. A twin-fluid atomizer of mold-wash slurry is designed for this project. New atomizer is equipped with the existing manufacturing facility to produce pipes. Cast-iron pipes (.cent.125*L3000mm) are produced and the surface roughnesses of those are analysed by UBM. The average surface roughness of new products is 6.7.mu.m while the old products of sand-resin coating method have 17.0.mu.m of average surface roughness. The surface roughness of cast-iron pipe is improved very much than before.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.191-199
• /
• 2000

Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined the impression quality in clinical condition and the wettability of impression and die material. Four commercially available addition silicone impression material (Express, Examix, Contrast, Perfect) and three die materials (Die-Keen, Vel-Mix, Fuji-Rock) were studied. A total of 50 putty/wash and heavy body/wash impressions of wet intact permanent molar teeth were examined for definition of the gingival sulcus reproduction and then classified in quality ranking. The percentage of the sulcus reproduction ability of each material was calculated from the sulcus depths of cross-sectioned epoxy resin casts from the impressions and clinically measured sulcus depths, The same impression materials were used to produce 3 groups of die stone casts form void entrapment die had been exposed to milk. Voids in the impression body and stone casts ere counted under a stereoscopic microscope. From the experiment, the following results were obtained : 1. Sulcus reproduction ability of additional silicone impression material were diminished in order of Express, Examix, Perfect, Contrast. The significant difference was found between Perfect and other material. Heavy body/wash combination was superior In putty/wash method n Perfect impression material. 2. In direct observation, Contrast showed least void in impression body but correlations ere not found between sulcus reproduction and void production. 3. In void entrapment laboratory test, wettability were diminished in order of Examix, Contrast, Express, Perfect. Clinical impression recording seems not to correlate with laboratory test. 4. The wettability of die material to impression material was not different in Express, Examix, Contrast. But, in Perfect, Die-Keen had superior wettability to others.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.622-632
• /
• 2005

Statement of problem: Silicone Index Tooth Tray impression system which does not use gingicord has a shortcoming. It takes time to remove internal wall of Silicone Index Tooth Tray for space of wash impression material. Purpose: This study was to evaluate whether providing certain space to impression body can prevent from doing complicated laboratory work. Material and methods: After mounting metal dies with shoulder and chamfer margins arbiturarily, SITT was produced using $Blu-mousse^(R)$. In one experimental group, wash impression was taken using $Fit-tester^(R)$ without removing interior surface of SITT and in the other group, wash impression was taken using $Fit-tester^(R)$ providing 0.5mm space in the SITT and then compared the differences in two groups. Results: 1. There was no significant difference between a group which did not allow space and a group which granted equal 0.5mm space. 2. There was no significant difference between gingival diameter, occlusal diameter of metal die that has shoulder margin and gingival diameter, occlusal diameter of metal die that has chamfer margin. 3. There was no significant difference between a group which did not take pick-up impression and a group which took pick-up impression through relining method using SITT 4. There was no significant difference between a group that poured immediately after taking primary impression and a group that poured after removing poured stone die. Conclusions: When taking an impression of an abutment using SITT impression system, it is considered to obtain clinically identical results between a group that did not grant a 0.5mm space within SITT for wash impression and a group which invest a space. Furthermore, it is considered possible to produce an individual die through secondary pouring.

• 한국식품저장유통학회지
• /
• 제14권1호
• /
• pp.54-60
• /
• 2007

신선편이 당근채 세척시 오존수 사용에 의한 품질 및 안전성 향상 효과를 구명하기 위해 연구를 수행하였다. 세척 당근을 절단한 뒤 100ppm의 염소수에 1, 2회 세척 및 오존발생장치에서 공급되는 초기 오존수 농도 2ppm에서 1,5, 20분 세척한 뒤 $O_{2}$ 투과율 $29.2pmol{\cdot}s^{-1}{\cdot}m^{-2}{\cdot}Pa^{-1}$ 필름으로 포장하여 $5^{\circ}C$에서 3주간 저장되었다. 당근채의 오존수 세척처리는 저장 중 포장내부의 기체 조성, 당근채의 품질 및 미생물 수에 영향을 미쳤다. 오존수 20분 처리는 당근채 저장 중 $CO_{2}$ 농도가 낮고, 경도가 높았으며, 백화지수(WI), 이취발생 및 미생물 수가 적어 가장 높은 관능점수를 나타내며 저장 3주까지 상품성을 유지하였다. 그러나 염소수 1회 세척은 비록 미생물 수는 오존수 20분 처리와 함께 낮게 나타났으나 품질에 있어서 상대적으로 WI와 이취발생이 높아 오존수 20분 보다 품질변화가 심하였다. 따라서 오존수 20분 처리는 신선편이 당근채의 염소 세척을 대체할 수 있는 방법으로 판단되었다.

• 대한치과의사협회지
• /
• 제41권1호통권404호
• /
• pp.35-41
• /
• 2003

Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined theimpression quality in clinical condition and the wettability of impression material. Three commercially available addition silicone impression material (Imprint; 3M, USA, Examix; GC, Japan, Perfect; Handae, Korea) were studied. A total of 90 putty/wash impressions of semi-dried premolars and wet molar teeth were examined for void production in impression body. The percentae of the sulcus reproduction ability of each material was calculated from the sulcus depths of cross-sectioned casts from the impressions with stereomicroscope. Three impression materials were used to produce die stone casts from vcid entrapment die. Voids in the stone casts were counted with the stereomicroscpe. From the experiment, the following results were obtained: 1. In direct observation, Imprint showed greatest numbers of void in impression body (P<.001).However, correlations were not found between sulcus reproduction and void production. 2. Sulcus reproduction ability of additional silicone impression material was diminished in order of Imprint, Examix, Perfect. The significant difference was found between Imprint and other material (P<.001). 3. In void entrapment laboratory test, void productions was diminished in order of Examix, Imprint, Perfect. All voids in casts were less in delayed poured cast than immediately poured cast. 4. Especially, the stone pouring time of Perfect impression material should be delayed.

• 복식
• /
• 제58권4호
• /
• pp.99-112
• /
• 2008

The aim of the study was to look into the construction methods of historical corsetry and compare them with the construction methods of corsetry today. Through a comparative study, it was concluded that the design, material, sewing and functions of corsetry of a certain period are sum of the clothing techniques and fashion of the time. Corset was first appeared at the end of the 16th century. It has been through many changes in terms of items, materials, patterns, sewing methods in order to make right silhouettes of the time. Now corsetry has been developed into various items such as waist nipper, all-in-one, nipper bra, and girdle. All these items have a common purpose, that is to improve the body shape. The corsetry of the past was made of non stretchable materials, so they used to restrict body movements, and required individual fitting several times. Due to the development of thin durable stretchable fabrics, functional bones, and advanced sewing machines, construction methods of seam, hem and opening are simplified compare to their predecessors. Consequently corsetry became less weighted, easy to wear, easy to wash and easy to mass produce. Yet they have consistency in sewing techniques such as using bones or wires to support bodice shape, using durable twill fabrics over plain for attractive body shapes.

• 보존과학연구
• /
• 통권20호
• /
• pp.121-137
• /
• 1999

Among pigment used at work of Dan-Chung, Emerald Green is specific illuminating fluorescent light of green. It is very difficult to change other organic or inorganic pigment. All of the internal high class pigment has rare light. But Emerald Green is superior to fresh color and stability out of industrial chemical products. It forms over 50% of quantity and importance of a pattern painting. Emerald Green prohibited to produce because of its toxicpollutants, so required to changing pigment development. It is characterized to excellent color, convenient work, economical, against-sunlight, against-air pollutant and durability. The result of a test is follows; 1. We are investigated into producing internal natural Emerald Green, import external pigment and industrial synthesis method etc. but unable to buy because of its toxic pollutant. 2. We are made six samples by yellowish and green is hpigment mixing. We tested on against sunlight and air pollutant. The best mixing ratio is follows. Titanium Dioxide R760 : 18g- Chalk, White Wash : 10g- Permanent Yellow : 7g- Cyanine Green : 8g- Chrome Yellow : 3g- Resin(Vehicle) : Acryl Emulsion(Styrene + 2-Ethyl HexylAcrylate + Methyl Meth Acrylate) 8%

• 패션비즈니스
• /
• 제20권4호
• /
• pp.128-140
• /
• 2016

In this study, dyeability of Urtica Dioica L. extract, which is relatively less studied, was measured. The extract of this plant was used to dye cellulose and protein fiber to check its usage as a natural green dye. Three different methods were used to produce extract. Dried Urtica Dioica L. was extracted with 100% ethanol, 50% ethanol with 50% distilled water and 100% distilled water. Then dyeing solution was obtained by blending with distilled water at 1-to-1 ratio. The maximum dyeability was obtained when 100% ethanol extract of dried Urtica Dioica L. used to dye fabrics at 60 degrees celsius for 60 minutes without mordant treatment. Cotton, rayon, wool and silk were dyed and dyeability for each fiber was measured for color difference value then compared to its control. The results show that dyeability of rayon and dyeability of wool are stronger, and that when color position for each mordant is measured, color difference is most diverse on cotton with pre-mordant treatment. Color fastness to wash, perspiration and rubbing crockmeter were superb, but color fastness to light was low, therefore, additional study on this is needed to improve. Urtica Dioica L. is now expected to be used practically as green color dye as well as medicinally and edible.