• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.132-137
• /
• 2003

This performance is motivated to develop a tracking antenna system for receive the satellite broadcasting signal in the coast sailing ship. Therefore, this system is made to small size, light weight and simple operation which is must to low cost system for popularization of small size ship and adaptive possibilities with useful on a ship in the coast using 1 axis Az-mount. The antenna mount structure is a compact size and easy operation to the Az-axis type which is operated by step motor. The antenna unit is a domestic made plate type of patch array and ship's moving detection is using the gyro sensor for ship's moving control. We are designed to algorithm, which walking is abreast for step track and ship's moving compensation. Ship's moving compensation is adapted to the closed loop control method by detection from gyro sensor. This system is consisted of micro processor, ADC, comparative amplifier, step motor driver, mount mechanism and algorithm. We have analysised the tracking performance of prototype on sailing ship board.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.301-308
• /
• 2007

This paper proposes high performance coprocessor architecture for real time dense disparity computation based on a phase-based binocular stereo matching technique called local weighted phase-correlation(LWPC). The algorithm combines the robustness of wavelet based phase difference methods and the basic control strategy of phase correlation methods, which consists of 4 stages. For parallel and efficient hardware implementation, the proposed architecture employs SIMD(Single Instruction Multiple Data Stream) architecture for each functional stage and all stages work on pipelined mode. Such that the newly devised pipelined linear array processor is optimized for the case of row-column image processing eliminating the need for transposed memory while preserving generality and high throughput. The proposed architecture is implemented with Xilinx HDL tool and the required hardware resources are calculated in terms of look up tables, flip flops, slices, and the amount of memory. The result shows the possibility that the proposed architecture can be integrated into one chip while maintaining the processing speed at video rate.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1527-1539
• /
• 2015

In this paper the hardware implementation of the direct torque control based on the fuzzy logic technique of induction motor on the Field-Programmable Gate Array (FPGA) is presented. Due to its complexity, the fuzzy logic technique implemented on a digital system like the DSP (Digital Signal Processor) and microcontroller is characterized by a calculating delay. This delay is due to the processing speed which depends on the system complexity. The limitation of these solutions is inevitable. To solve this problem, an alternative digital solution is used, based on the FPGA, which is characterized by a fast processing speed, to take the advantage of the performances of the fuzzy logic technique in spite of its complex computation. The Conventional Direct Torque Control (CDTC) of the induction machine faces problems, like the high stator flux, electromagnetic torque ripples, and stator current distortions. To overcome the CDTC problems many methods are used such as the space vector modulation which is sensitive to the parameters variations of the machine, the increase in the switches inverter number which increases the cost of the inverter, and the artificial intelligence. In this paper an intelligent technique based on the fuzzy logic is used because it is allows controlling the systems without knowing the mathematical model. Also, we use a new method based on the Xilinx system generator for the hardware implementation of Direct Torque Fuzzy Control (DTFC) on the FPGA. The simulation results of the DTFC are compared to those of the CDTC. The comparison results illustrate the reduction in the torque and stator flux ripples of the DTFC and show the Xilinx Virtex V FPGA performances in terms of execution time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1130-1137
• /
• 2003

This performance is motivated to develop a tracking antenna system for receive the satellite broadcasting signal in the coast sailing ship. Therefore, this system is made to small size, light weight and simple operation which is must to low cost system for popularization of small size ship and adaptive possibilities with useful on a ship in the coast using 1 axis Az-mount. The antenna mount structure is a compact size and easy operation to the Az-axis type which is operated by step motor. The antenna unit is a domestic made plate type of patch array and ship's moving detection is using the gyro sensor for ship's moving control. We are designed to algorithm, which walking is abreast for step track and ship's moving compensation. Ship's moving compensation is adapted to the closed loop control method by detection from gyro sensor. This system is consisted of micro processor, ADC, comparative amplifier, step motor driver, mount mechanism and algorithm. We have analysised the tracking performance of prototype on sailing ship board.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.24-30
• /
• 2009

In this paper, the FPGA modem platform complying with 3GPP Release 7 eHSPA specifications and its regularized verification flow are proposed. The FFGA platform consists of modem board supporting physical layer requirements, MCU and DSP core embedded control board to drive the modem board, and peripheral boards for RF interfacing and various equipment interfaces. On the other hand, the proposed verification flow has been regularized into three categories according to the correlation degrees of hardware-software inter-operation, such as simple function test, scenario test call processing and system-level performance test. When it comes to real implementations, the emulation verification strategy for low power mobile SoC is also introduced.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1321-1327
• /
• 2019

This paper describes an efficient hardware implementation of modular square root (MSQR) computation over GF(p), which is the operation needed to map plaintext messages to points on elliptic curves for elliptic curve (EC)-ElGamal public-key encryption. Our method supports five sizes of elliptic curves over GF(p) defined by the National Institute of Standards and Technology (NIST) standard. For the Koblitz curves and the pseudorandom curves with 192-bit, 256-bit, 384-bit and 521-bit, the Euler's Criterion based on the characteristic of the modulo values was applied. For the elliptic curves with 224-bit, the Tonelli-Shanks algorithm was simplified and applied to compute MSQR. The proposed method was implemented using the finite field arithmetic circuit with 32-bit datapath and memory block of elliptic curve cryptography (ECC) processor, and its hardware operation was verified by implementing it on the Virtex-5 field programmable gate array (FPGA) device. When the implemented circuit operates with a 50 MHz clock, the computation of MSQR takes about 18 ms for 224-bit pseudorandom curves and about 4 ms for 256-bit Koblitz curves.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.35-44
• /
• 2002

In this paper, an implementation method of RSA exponentiator based on Radix-$2^k$ modular multiplication algorithm is presented and verified. We use Booth receding algorithm to implement Radix-$2^k$ modular multiplication and implement radix-16 modular multiplier using 2K-byte memory and CSA(carry-save adder) array - with two full adder and three half adder delays. For high speed final addition we use a reduced carry generation and propagation scheme called pseudo carry look-ahead adder. Furthermore, the optimum value of the radix is presented through the trade-off between the operating frequency and the throughput for given Silicon technology. We have verified 1,024-bit RSA processor using Altera FPGA EP2K1500E device and Samsung 0.3$\mu\textrm{m}$ technology. In case of the radix-16 modular multiplication algorithm, (n+4+1)/4 clock cycles are needed and the 1,024-bit modular exponentiation is performed in 5.38ms at 50MHz.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.542-558
• /
• 2023

A digital focus index (DFI) is a value used to determine image focus in scientific apparatus and smart devices. Automatic focus (AF) is an iterative and time-consuming procedure; however, its processing time can be reduced using a general processing unit (GPU) and a multi-core processor (MCP). In this study, parallel architectures of a minimax search algorithm (MSA) are applied to two DFIs: range algorithm (RA) and image contrast (CT). The DFIs are based on a histogram; however, the parallel computation of the histogram is conventionally inefficient because of the bank conflict in shared memory. The parallel architectures of RA and CT are constructed using parallel reduction for MSA, which is performed through parallel relative rating of the image pixel pairs and halved the rating in every step. The array size is then decreased to one, and the minimax is determined at the final reduction. Kernels for the architectures are constructed using open source software to make it relatively platform independent. The kernels are tested in a hexa-core PC and an embedded device using Lenna images of various sizes based on the resolutions of industrial cameras. The performance of the kernels for the DFIs was investigated in terms of processing speed and computational acceleration; the maximum acceleration was 32.6× in the best case and the MCP exhibited a higher performance.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.113-116
• /
• 2011

최근 IT 기술의 급격한 발전으로 개인정보, 환경 등 다양한 정보를 수시로 수집 및 관리하면서 사용자가 원할시 즉각적인 정보서비스를 제공하고 있다. 그러나 유 무선상의 데이터 전송은 정보의 도청, 메시지의 위 변조 및 재사용, DoS(Denial of Service)등 외부의 공격으로부터 쉽게 노출된다. 이러한 외부 공격은 개인 프라이버시를 포함한 정보서비스 시스템 전반에 치명적인 손실을 야기 시킬 수 있기 때문에 정보보호 시스템의 필요성은 갈수록 그 중요성이 부각되고 있다. 현재까지 정보보호 시스템은 소프트웨어(S/W), 하드웨어(ASIC), FPGA(Field Progr- ammable Array) 디바이스를 이용하여 구현되었으며, 각각의 구현방법은 여러 가지 문제점이 있으며 그에 따른 해결방법이 제시되고 있다. 본 논문에서는 다양한 환경에서의 정보보호 서비스를 제공하기 위한 재구성형 SoC 구조를 제안한다. 제안된 SoC는 비밀키 암호알고리즘(AES), 암호학적 해쉬(SHA-256), 공개키 암호알고리즘(ECC)을 수행 할 수 있으며, 마스터 콘트롤러에 의해 제어된다. 또한 정보보호 시스템이 요구하는 다양한 제약조건(속도, 면적, 안전성, 유연성)을 만족하기 위해 S/W, ASIC, FPGA 디바이스의 모든 장점을 최대한 활용하였으며, MCU와의 효율적인 통신을 위한 I/O 인터페이스를 제안한다. 따라서 제안된 정보보호 시스템은 기존의 시스템보다 다양한 정보보호 알고리즘을 지원할 뿐만 아니라 속도 및 면적에 있어 상충 관계를 개선하였기 때문에 저비용 응용뿐만 아니라 고속 통신 장비 시스템에도 적용이 가능하다.

• Smart Media Journal
• /
• v.13 no.5
• /
• pp.19-25
• /
• 2024

The biggest type of behavior that prevents people with developmental disabilities from entering society is aggressive behavior. Aggressive behavior can pose a threat not only to the personal safety of the person with a developmental disability, but also to the physical safety of others. In this study, we propose a wearable system using a low-power processor. The proposed system uses an IMU (Inertial Measurement Unit) to analyze user behavior, and when attack behavior is not detected for a certain period of time through an LED array attached to the developed system, an interesting LED is displayed. By expressing patterns, we provide behavioral intervention through compensation to people with developmental disabilities. In order to implement a system that must be worn for a long time in a power-limited environment, we present a method to optimize performance and energy consumption across all stages, from data preprocessing to AI model application.