• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.248-259
• /
• 2014

Acceptor-doped cerium pyrophosphates have shown significant proton conductivity of > $10^{-2}Scm^{-1}$ in the range of $100-300^{\circ}C$ and are considered promising candidates for use as electrolytes in proton-conducting, ceramic electrolyte fuel cells (PCFCs). But, cerium pyrophosphates themselves do not have structural protons, and protons incorporate into their material bulk only as impurities on exposure to a hydrogen-containing atmosphere. However, proton incorporation and proton conduction in these materials are expected to be affected by factors such as the nature (ionic size and charge) and concentration of the aliovalent dopant, processing history (synthesis route and microstructure), and the presence of residual phosphorous phosphate ($P_mO_n$) phases. An exact understanding of these aspects has not yet been achieved, leading to large differences in the magnitude of proton conductivity of cerium pyrophosphates reported in various studies. Herein, we systematically address some of these aspects, and present an overview of factors affecting proton conductivity inacceptor-doped $CeP_2O_7$.

• Korean Journal of Materials Research
• /
• v.30 no.2
• /
• pp.57-60
• /
• 2020

Titanium aluminides have attracted special interest as light-weight/high-temperature materials for structural applications. The major problem limiting practical use of these compounds is their poor ductility and formability. The powder metallurgy processing route has been an attractive alternative for such materials. A mixture of Ti and Al elemental powders was fabricated to a mechanical alloying process. The processed powder was hot pressed in a vacuum, and a fully densified compact with ultra-fine grain structure consisting of Ti₃Al intermetallic compound was obtained. During the compressive deformation of the compact at 1173 K, typical dynamic recrystallization (DR), which introduces a certain extent of grain refinement, was observed. The compact had high density and consisted of an ultra-fine equiaxial grain structure. Average grain diameter was 1.5 ㎛. Typical TEM micrographs depicting the internal structure of the specimen deformed to 0.09 true strain are provided, in which it can be seen that many small recrystallized grains having no apparent dislocation structure are generated at grain boundaries where well-developed dislocations with high density are observed in the neighboring grains. The compact showed a large m-value such as 0.44 at 1173 K. Moreover, the grain structure remained equiaxed during deformation at this temperature. Therefore, the compressive deformation of the compact was presumed to progress by superplastic flow, primarily controlled by DR.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.103-112
• /
• 1998

This paper proposes a propagation prediction model which can calculate a propagation path loss easily at option point in case of the propagation processing by repeat reflection when we analysis a propagation route, it makes the calculation speed which is the defect of a geometrical of image method and a ray-launching method improve and we develop and apply the algorithms which can do an angle of incidence, an angle of reflection with a propagation direct path, a reflection path and a maximum reflection number arithmetic process synchronously. Finally we choose as a sample which is the real road condition where is around SK telecoms chunnam branch office in wolgok-dong, kwangsan-ku, kwangju and simulate proposition model then we demonstrate the relative superiority with comparing the results.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.24-34
• /
• 2001

IP address lookup is a major bottleneck of IP packet processing in high speed router. Existing IP lookup methods are focused only on lookup throughput without considering lookup table update. So their slow update can lead to lookup blocking or wrong routing decision based on obsolete routes. Especially existing IP lookup methods based on CAM(content addressable memory) have slow update of O(n) cycles in spite of their high throughput and low area complexity In this paper we proposes a new IP address lookup method based on pipelined CAM architecture(PICAM) with fast update of O(1) cycle of lookup table and high throughput and low area complexity.

• The KIPS Transactions:PartB
• /
• v.13B no.7 s.110
• /
• pp.663-670
• /
• 2006

For virtual target to be displaying on real image realistically, it is essential to determine the location of the virtual object together with producing the occlusions area after registering two world. In this paper, we propose the new method to solve occlusions which happens during virtual target moves according to the simulated route on real image. For this purpose, we first construct three dimensional virtual world by DEM of experimental area and register CCD camera image on it by visual clues. Next, we also propose a method to solve the occlusion using snake and picking algorithm which can extract the three dimensional information of the position happening occlusion in the image and can use it when target moves that area. In the experiment, we proved the effectiveness of the proposed method in the environment which a partial occlusions happens.

• Journal of the Korean Ceramic Society
• /
• v.44 no.5 s.300
• /
• pp.184-189
• /
• 2007

In this study, a novel-processing route for producing microcellular cordierite ceramics has been developed. The proposed strategy for making the microcellular cordierite ceramics involves three steps: (i) fabricating ceramic-filled preceramic foams by heating a mixture of polysiloxane, expandable microspheres, talc, and alumina in a mold, (ii) cross-linking the foamed body, and (iii) transforming the body into microcellular cordierite ceramics by sintering. Cu jig was used for near net shaping in the foaming step. The experimental variables such as the shape of foaming jig and the content of expendable microsphere were investigated. By controlling the content of expendable microsphere, it was possible to make the porous cordierite ceramics with cell density of ${\sim}1.0{\times}10^9\;cells/cm^3$.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.108-113
• /
• 2015

In an effort to evaluate the practicability of an imprinting technique for amorphous chalcogenide film in Ge-based compositions, we investigate the deformation behavior of the surface of amorphous $GeSe_2$ film deposited via a thermal evaporation route according to varying static loads applied at elevated temperatures. We observe that, under these static loading conditions, crystallization tends to occur on its surface relatively more easily than in As-based $As_2Se_3$ films. As for the present $GeSe_2$ film, higher processing temperatures are required in order to make its surface reflect the given stamp patterns well; however, in this case, its surface becomes partially crystallized in the monoclinic $GeSe_2$ phase. The increased vulnerability of this amorphous $GeSe_2$ film toward surface crystallization under static loading, when compared with the $As_2Se_3$ counterpart, is explained in terms of the topological aspects of its amorphous structure.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.2
• /
• pp.127-134
• /
• 2004

In this paper, human motor behaving model based sensory motor coordination(SMC) algorithm is implemented on robotic grasping task. Compare to conventional SMC models which connect sensor to motor directly, the proposed method used biologically inspired human behaving system in conjunction with SMC algorithm for fast grasping force control of robot arm. To characterize various grasping objects, pressure sensors on hand gripper were used. Measured sensory data are simultaneously transferred to perceptual mechanism(PM) and long term memory(LTM), and then the sensory information is forwarded to the fastest channel among several information-processing flows in human motor system. In this model, two motor learning routes are proposed. One of the route uses PM and the other uses short term memory(STM) and LTM structure. Through motor learning procedure, successful information is transferred from STM to LTM. Also, LTM data are used for next moor plan as reference information. STM is designed to single layered perception neural network to generate fast motor plan and receive required data which comes from LTM. Experimental results showed that proposed method can control of the grasping force adaptable to various shapes and types of greasing objects, and also it showed quicker grasping-behavior lumining time compare to simple feedback system.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.141-148
• /
• 2002

In this paper, we study the various performance of Distributed QoS Routing according to how many level of routing table information in router. And we study Flooding and recently proposed 2-level forwarding, and compare with performance of implicit 3-level forwarding. Performance factors are message overhead that is generated on Distributed QoS Routing and Route Setup success Rate, Connection blocking rate, Network Utilization. They can decide the accuracy of routing information in rouser. Our simulation shows that more level of routing table information have, lower message overhead generate but lower performance at other factors because of inaccuracy of routing information.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.945-952
• /
• 2002

For a successful inter-system handoff, several important issues must be handled and additional new features must be considered. This paper focuses on the cellular structure of small cells which are required for the high density of population and a handoff scheme designed between two heterogenous networks. Incase of inter-system handoff (ISHO), the time required to complete the handoff can vary and depends on the structure of networks. And also the transmission of additional signals can increase the probability of failure for ISHO. Here we propose the sub-boundary cell base station (Sub-BBS) to alleviate the role of the BBS. The Sub-BBS is adjacent to BBS in the same regional mobile network. 쪼en the mobile terminal enters Sub-BBS, the network starts finding a new route and after entering BBS, it initiates the transformation process. The proposed scheme significantly reduces the ISHO failure rate compared to the existing one which is the most recent and known as efficient.