• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.270-273
• /
• 2001

Electrical tree is studied widely by manufacture state of insulating material fare and blazing fire diagnosis system of use in phenomenon of part discharge that happen for main cause of dielectric breakdown of equipment for electric power. Use process that draw tree pattern here measuring above zero to study special quality of this electricity tree, real-time processing by image processing is proposed because reproduction of tree blazing fire process drops and pattern of tree is difficult correct quantification of tree growth by existent visual observation by involution. This research presents general process that need in image processing of tree blazing fire, and that remove various noises that happen in above zero by measuring electrical tree dividing background and complete view in measured above zero taking advantage of specially proposed complete view object abstraction techniques effectively and quantification of tree becomes easy naturally, can apply to dielectric breakdown estimate because can chase growth process of tree.

• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.457-464
• /
• 2003

In the powder compact melting technique, proper precursor fabrication is very important because density distribution after foaming and foamability are determined during precursor fabrication process. The fabrication of the precursor has to be performed very carefully because any residual porosity or other defects will lead to poor results in further processing. In order to evaluate the effect of the compaction parameters on the kinetics of the foaming process, a series of experiments were performed. In this study, aluminium foams with a closed cell structure were fabricated by using both the powder compact method and the induction heating process. A proper induction coil was designed to obtain a uniform temperature distribution over the entire cross sectional area of precursor. To establish the foamable precursor fabrication conditions, effects of process parameters such as the titanium hydride content (0.3∼1.5 wt.%), pressing pressure of the foamable precursor (50∼150kN) on the pore morphology were investigated.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.191-193
• /
• 2016

본 논문에서는 SSD 저장장치를 포함하는 하둡의 Iterative Processing에 대한 성능 분석 결과를 소개한다. 하둡은 맵 리듀스 병렬 프로그래밍 모델을 통해 Batch Processing에 특화된 구조를 가지고 있는 프레임 워크이다. 이는 병렬/분산 환경에서 큰 성능향상을 보장하지만, 반복 작업을 수행하는 Iterative Processing에 대하여는 성능이 낮아지는 문제가 존재하고 있다. 이에 본 논문에서는 점차 낮아지는 가격으로 인해 하둡시스템에 적용 가능성이 타진되는 SSD를 통해 반복 작업의 성능이슈를 해결할 수 있는지 확인하고, SSD를 통한 성능향상의 요소가 존재하는지 알아보고자 실험을 진행하였다. 실험에서는 Batch Processing인 word count와 Iterative Processing인 Page Rank 알고리즘을 MapReduce로 구현하고 데이터 크기에 따른 성능 향상도를 측정하였고, SSD 추가와 같은 하드웨어적인 성능을 통한 하둡의 반복 작업은 큰 효율을 기대하기가 어렵다는 결론을 보였다.

• Journal of Information Processing Systems
• /
• v.5 no.4
• /
• pp.229-236
• /
• 2009

Sensors are deployed to gather physical, environmental data in sensor networks. Depending on scenarios, it is often assumed that it is difficult for batteries to be recharged or exchanged in sensors. Thus, sensors should be able to process users' queries in an energy-efficient manner. This paper proposes a spatial query processing scheme- Minimum Bounding Area Based Scheme. This scheme has a purpose to decrease the number of outgoing messages during query processing. To do that, each sensor has to maintain some partial information locally about the locations of descendent nodes. In the initial setup phase, the routing path is established. Each child node delivers to its parent node the location information including itself and all of its descendent nodes. A parent node has to maintain several minimum bounding boxes per child node. This scheme can reduce unnecessary message propagations for query processing. Finally, the experimental results show the effectiveness of the proposed scheme.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.2
• /
• pp.59-65
• /
• 2007

Packaged food products often undergo retort processing, a thermal processing in a pressurized vessel called a retort, to ensure their microbiological safety or shelf-stability under normal non-refrigerated conditions of storage and distribution. Retort processing is generally aimed to accomplish commercial sterility of packaged foods with acceptable nutritional and sensorial qualities. Fundamental principles on retort processing, such as thermal resistance kinetics of target microorganism, heat penetration theory, and methods for evaluating process sterility and food quality loss, were reviewed. Factors affecting process severity, heat transfer mechanism, and heat penetration efficiency were summarized. General features of retortable packaging formats including metal cans, glass jars, and plastic packages were also briefly reviewed.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.49-58
• /
• 2017

This paper suggests a specific model that could efficiently improve the interaction and the interface between MES(Manufacturing Execution System) server and POP(Point of Production) terminal through electronic document server and electronic pen, bluetooth receiver and form paper in disassembly and process inspection works. The proposed model shows that the new method by electronic document automation system can more efficiently perform to reduce processing time for maintenance work, compared with the current approach by handwritten processing system. It is noted in case of the method by electronic document automation system that the effects of proposed model are as follows; (a) While the processing time per equipment for maintenance by the current method was 300 minutes, the processing time by the new method was 50 minutes. (b) While the processing error ratio by the current method was 20%, the error ratio by the new method was 1%.

• Journal of the Korea Society for Simulation
• /
• v.10 no.3
• /
• pp.59-70
• /
• 2001

Typical low-level image processing tasks require thousands of operations per pixel for each input image. Traditional general-purpose computers are not capable of performing such tasks in real time. Yet important features of traditional computers are not exploited by low-level image processing tasks. Since storage requirements are limited to a small number of low-precision integer values per pixel, large hierarchical memory systems are not necessary. The mismatch between the demands of low-level image processing tasks and the characteristics of conventional computers motivates investigation of alternative architectures. The structure of the tasks suggests employing an array of processing elements, one per pixel, sharing instructions issued by a single controller. In this paper we implemented various image processing filtering using the format converter. Also, we realized from conventional gray image process to color image process. This design method is based on realized the large processor-per-pixel array by integrated circuit technology This format converter design has control path implementation efficiently, and can be utilize the high technology without complicated controller hardware.

• Journal of architectural history
• /
• v.25 no.3
• /
• pp.23-35
• /
• 2016

The purpose of this study is to classify types of the eaves structure of buildings with the Jusimpo-type structure and to analyze the characteristics of each eaves structure. For this objective, forty buildings were selected and investigated. The results of analysis are summarized as follows. First, the main members of framework which handle a load burden on the long-rafter(長椽) are classified as the Jusim-dori(柱心道里) and the Oemok-dori(外目道里). Based on the method of handling a load, the eaves structure is classified into three types; the Jusim-processing-type(柱心中心形), the Oemok-processing-type(外目中 心形), and the Oemok-processing-variant-type(外目中心變異形). The Jusim-processing-type is the set where the internal length of a long-rafter is longer than the length of the eaves on the basis of the center of a column. The Oemok-processing-type is the set where the external length of a long-rafter is longer than the internal length of it. And the Oemok-processing-variant-type is the set where the internal length of a long-rafter is longer than the external length of it, but it is shorter than the length of the eaves which includes the extruded length of a Buyeon(浮椽). Second, the Jusim-processing-type had been generally adopted in the Jusimpo-type structure of the Goryeo Dynasty. But since the 17th century, the Oemok-processing-type had the highest application rate. Third, the change from the Jusimdori-processing-structure to the Oemokdori-processing-structure means that the long-rafter is moved to the direction of outside of the building, and thus the Jung-dori(中道里) is gradually moved to the column center. And, the change of the eaves with the Jusimpo-type structure was not a process for increasing the length of the eaves but a process for adopting the advantages of the Dapo-type structure by changing the arrangement of purlin. Fourth, the change from the Jusimpo-type structure to the Dapo-type structure could be understood as a process for moving the main point for handling a load from the Jusim-dori to the Oemok-dori.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.361-366
• /
• 2022

There are several ways to process large amounts of data. Depending on the processing method, there is a big difference in processing speed to create a large data list. Typically, to make a large data list, large data is converted into a normalized query, and the result of the query is stored in a List Map and converted into a printable form. This process occurs as a cause of lowering the processing speed step by step. In the process of storing the results of the created query as a List Map, the processing speed differs because the data is stored in a different format for each type of data. Through the simultaneous processing of GO language, we want to solve the problem of the existing difference in processing speed. In other words, it compares the results of GO language concurrency processing by providing how different and how it proceeds between the format contained in the existing List Map and the method of processing using concurrency in large data lists for faster processing. do.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.262-267
• /
• 2003

At process of production according to development of accumulation degree of semi-conductor element, because functional mistake examination time required increases, is becoming big obstacle factor in cost-cutting. Studied pattern generator that generate pattern and address that is bundle enemy to process these controversial point effectively.