• 한국디지털정책학회:학술대회논문집
• /
• 2004.11a
• /
• pp.111-127
• /
• 2004

In this paper we describe an application of the lexical resource JurWordNet and of the Core Legal Ontology as a descriptive vocabulary for modeling legal domains. It can be viewed as the semantic component of a global standardisation framework for digital governments. A content description model provides a repository of structured knowledge aimed at supporting the semantic interoperability between sectors of Public Administration and the communication processes towards citizen. Specific conceptual models built from this base will act as a cognitive interface able to cope with specific digital government issues and to improve the interaction between citizen and Public Bodies. As a Case study, the representation of the click-on licences for re-using Public Sector Information is presented.

• Journal of Environmental Health Sciences
• /
• v.49 no.4
• /
• pp.179-182
• /
• 2023

The Chemical Substances Control Act has been legislated to counter the risks posed by chemical substances to public health and the environment, but a number of small- and large-scaled incidents related to hazardous chemicals continue to occur every year. The Korean Ministry of Environment takes legal responsibility for prevention, preparedness, and response to nationwide chemical accidents under the Chemical Substances Control Act. The determination of chemical accidents that occur during hazardous chemical handling processes is based on the Article 2 (Definitions) of the law and the administrative criteria for judgement of chemical accidents. However, there are certain ambiguities in the scientific basis for determining chemical accidents under the current regulations. Whether or not a chemical accident has a direct influence on penalties and administrative measures for a workplace where an accident occurred, it is necessary to find reasonable criteria for determining chemical accident based on legal and scientific evidence.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.921-924
• /
• 2013

PMO(Project Management Office)는 해당 영역의 프로젝트를 조정된 중앙 통제 방식으로 관리하기 위하여 필요한 다양한 책임을 배정받은 조직, 부서나 주체를 말하며, 프로젝트 관리 지원 기능을 제공하는 일부터 직접적인 프로젝트 관리에 이르기까지 다양한 책임을 지니고 있다. 본 논문에서는 PMO 제도 도입에 따른 성공적인 공공 정보화 사업 완수를 위해 우리나라 PMO 관련 현 법제도 현황을 선행 연구자들에 따른 PMO 기능 분석 종합 자료와 미국의 표준화된 프로젝트 관리 프로세스인 PMBOK(Project Management Body of Knowledge) 관리 지식 영역 프로세스를 적용해 우리나라 현 법제도의 적합성을 비교 분석하였다. 연구 결과로 공공 정보화 사업에서 PMO 제도를 도입함에 있어 우리나라 현 법제도가 공공 정보화 사업의 품질을 높이는데 보완되어야 할 영역들이 요구되었다. 향후 본 연구를 통해 공공 정보화 사업의 PMO 제도 도입 시 법적 제도화와 전문성을 제고하여 성공적인 사업 수행에 도움이 되도록 하고자 한다.

• IE interfaces
• /
• v.16 no.3
• /
• pp.291-299
• /
• 2003

The managerial environment of automobile industry has been rapidly changing, mainly with the tighter standard of legal and environmental regulations, the pressure of cost reduction from the end-user, the various functional improvements of vehicles, and the globalization management. In order to survive in this complicate circumstances, the automakers have strongly pursued the mutual collaboration with the suppliers, especially tier-1, for the optimal selection of parts/materials and the assembly manufacturing processes of the new model development. They prepare the early involvement program for the suppliers during the conceptual design stage, and implement the win-win strategy of technology development activity, in order to improve the value creation. This study considers the strategic technology management of automotive steel sheets makers on the aspects of strategy, processes, human & physical resources, and organization structure. It also suggests the corporate strategies of steel mills, in order to obtain the technology competence.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.92-97
• /
• 2012

Risk management is the process that helps to identify hazards, analyze them, and then to create an action plan to avoid and mitigate these hazards. The main objective of risk management in product development and manufacturing is to provide safe and efficient products without spending too many resources. Medical device manufacturers also face enormous risks - regulatory, legal, and financial - based on their products and processes, and the concepts of risk management are particularly important because any single failure may result in serious damages to body or loss of life. In this regard, a set of guidelines for the application of risk management to medical devices has been issued by ISO and specified in the document ISO 14971 Medical devices - Application of risk management to medical devices. The main objective of this study is to investigate the application of risk management to dental implant development and manufacturing processes based on ISO 14971. A general risk management process is first introduced, and the application of ISO 14971 to dental implants is further investigated.

• The Journal of Society for e-Business Studies
• /
• v.17 no.3
• /
• pp.43-60
• /
• 2012

This study reviews the life cycle models considering legal and technical characteristics of personal data respectively. Based on the reviews, this research proposes 'consent and management based model of personal data' which is applicable to the domestic IT companies. The model suggested in this paper has characteristics that 'Consent' and 'Management' factors are ㅁpositively considered, which is overlooked in the other models. The validity of the model is examined by two methods, validation of the model of excellence by contrast of the other models, and 'consent' and 'management' factors cover all the life cycle processes. Using this model, IT companies will be contributed to the analysis of the personal data utilization and the development of IT system protection.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.375-383
• /
• 2023

Objectives: Coal-fired power plants feature diverse working conditions, including multi-layered employment structures and irregular work cycles due to outsourcing and non-standardized tasks. The current uniform occupational environment measurement systems have limitations in accurately assessing and evaluating these varied conditions. This study aims to propose alternative measurement and assessment strategies to supplement existing methods. Methods: Major domestic coal-fired power plants were selected as the study targets. To prepare for the study and establish strategies, work processes were identified and existing occupational environment measurement results were compared and analyzed. The study proceeded by employing three strategies: specific exposure groups (SEGs) measurement, continuous monitoring, and supplementary measurements, which were then compared and discussed. Results: Previous exposure index evaluations (5,268 cases) indicated that crystalline silica, a type of respirable particulate matter, had detection limits below the threshold (non-detectable) in 82.6% (4,349 cases) of instances. Exposures below 10% of the exposure limit were observed at a very low concentration of 96.1%. Similar exposure group measurements yielded results where detection limits were below the threshold in 38.2% of cases, and exposures below 10% of the limit were observed in 70.6%. Continuous monitoring indicated detection limits below the threshold in 12.6% of cases, and exposures below 10% of the limit were observed in 75.6%. Instances requiring active workplace management accounted for more than 30% of cases, with SEGs at 11.8% (four cases), showing a higher proportion compared to 3.0% (four cases) in continuous monitoring. For coal dust, exposures below 10% of the limit were highest in legal measurements at 90.2% (113 cases), followed by 74.0% (91 cases) in continuous monitoring, and 47.0% (16 cases) in SEGs. Instances exceeding 30% were most prevalent in SEGs at 14.7% (five cases), followed by legal measurements at 5.0% (eight cases), and continuous monitoring at 2.4% (three cases). When examining exposure levels through arithmetic means, crystalline silica was found to be 104.7% higher in SEGs at 0.0088 mg/m³ compared to 0.0043 mg/m³ in continuous monitoring. Coal dust measurements were highest in SEGs at 0.1247 mg/m³, followed by 0.1224 mg/m³ in legal measurements, and 0.0935 mg/m³ in continuous monitoring. Conclusions: Strategies involving SEGs measurement and continuous monitoring can enhance measurement reliability in environments with irregular work processes and frequent fluctuations in working conditions, as observed in coal-fired power plants. These strategies reduce the likelihood of omitting or underestimating processes and enhance measurement accuracy. In particular, a significant reduction in detection limits below the threshold for crystalline silica was observed. Supplementary measurements can identify worker exposure characteristics, uncover potential risks in blind spots of management, and provide a complementary method for legal measurements.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.33-42
• /
• 2010

Recently construction industry has faced new era as following the advances of IT technology. It becomes possible that information and knowledge among people are exchanged actively thanks to computer-based tools. In fact, the tools, PMIS(Project Management Information System) and KMS(Knowledge Management System) already have been introduced to constuction industry successfully. Lately IETM(Interactive Electronic Technical Manual) is tried to be one of these systems. This trying is being enlarged that the IETM's concept is changed to administrative and legal process provider throughout the lifespan of construction projects. However, it is hard to define construction IETM in mega-scale project like urban regeneration project because construction projects are complex and have diverse stakeholders. These properties may make the IETM ambiguous system. To do define IETM as a administrative and legal process provider, this research will conduct survey and interview, then analyze its own properties and find out design strategies. Based on the properties and strategies, suggesting IETM's system demands and architecture of urban regeneration processes.

• Journal of the Daesoon Academy of Sciences
• /
• v.34
• /
• pp.203-238
• /
• 2020

This paper focuses on legal risks and risk management affecting foreign religions or foreign religious legal persons in Taiwan. Beginning with an overview of relevant legal norms, types, processes, precautions, other such considerations, the purpose of this paper is to assist foreign religions when they first come to Taiwan for development. The contents of this paper can inform the adoption of a suitable methodology. If foreign religions want to come to Taiwan to develop, there may be several methods for their development: 1. Send Individual Missionaries to preach in Taiwan 2. Send Groups to Preach in Taiwan: 1) specify these groups as temples (or religious groups called "Lingtai (靈臺)"). 2) form civil associations or unincorporated religious groups 3) cases of temples that have not been registered (or specified as "Lingtai") 4) cases of offices and independent property and religious purposes that are not registered with the government or registered as temples (differentiated from item 3) 3. Establishing a research center in Taiwan: When foreign religions have established religious consortia in foreign countries, they can come to Taiwan to set up branches. 4. The establishment of legal persons in Taiwan: These are divided into "school legal persons", "religious corporate legal persons" and "religious consortium legal persons." Each of the above types has a different law applicable to it. This article will introduce the contents of each applicable law and important related matters such as the relevant funds, setting incentive rules for outstanding religious groups, and religious groups applying for foreigners. Due to foreign-related factors in the development and setting up of foreign religions in Taiwan, Act Governing the Choice of Law in Civil Matters Involving Foreign Elements is the parent law for solving conflicts regarding laws and regulations. The spirit of Article 2 and Italian Private International Law, Article 25, Paragraph 1 and so on, adopts the legalism of establishing legal personhood. It is clear that the national law regarding legal persons is the law under which it was incorporated. Therefore, foreign religious legal persons who encounter legal issues in Taiwan fall under the national law, which was established as domestic law. Therefore, internal matters regarding foreign legal persons are also applicable to domestic law.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.1
• /
• pp.17-24
• /
• 2015

Mixed acceptance sampling plans for quantity of products in prepackages are widely used for compliance testing. To pass testing, random samples jointly comply with two legal requirements: (i) the average net content of an inspection lot shall be not less than the labelled quantity and (ii) the numbers of under-filled prepackages in a sample are less than or equal to permitted numbers. This paper discusses some drawbacks of the acceptance sampling plans and requirements recommended in OIML R87 (KS A 50087 translated by Korean) developed by the International Organization of Legal Metrology and evaluates the producer's and consumer's risks. In addition, problem of determining a target value in filling processes of prepackages under the OIML R87 requirements is addressed and illustrated with a numerical example.