• 대한기계학회논문집A
• /
• 제32권4호
• /
• pp.327-332
• /
• 2008

The effectiveness of vehicle parts made through extrusion is in the limelight because of the advantages of high strength stiffness materials can be produced and the number of processes can be drastically reduced. Therefore, the parts should have sufficient stiffness and be lightweight enough to improve fuel efficiency. However, the application of extruded aluminum requires pre-bending technologies that can manufacture the complex designs profiles demanded by vehicle parts. The aim of this research is that the development of the variable curvature extrusion technology that can produce a variety of curvature. In order to produce a variable curvature, the guide transfer speed and transfer time should be controlled properly. The guide transfer speed and transfer time were examined by the theoretical analysis. A model was developed to simulate the deformation behaviors of extrusion and bending process from the symmetric bumper with range of radii from 1863mm to 2163mm. The theoretical analysis and FE analysis were verified through experimental method.

• 대한토목학회논문집
• /
• 제8권1호
• /
• pp.69-75
• /
• 1988

활성 슬러지 하수처리장의 주요 Process Control Variables인 Sludge age와 Sludge recycle올 고려하여 폐슬러지의 유량 ($Q_w$)을 효과적으로 결정하기 위한 두가지의 식이 개발되었다. 아울러 반송 슬러지의 일부를 폐슬러지로 배출할 경우에는 우선 순환비 (R)를, 포기조내의 활성슬러지의 일부를 폐슬러지로 배출할 경우에는 2차침전지의 슬러지 침전효율($S_f$)을 정확히 측정하여 개발된 식을 이용하면 폐슬러지의 유량을 용이하게 산정할 수 있다는 사실이 Sensitivity analysis의 결과로 밝혀졌다.

• Industrial Engineering and Management Systems
• /
• 제8권3호
• /
• pp.131-138
• /
• 2009

The variable sampling inspection scheme with screening for the purpose of assuring the upper limit of maximum expected surplus loss after inspection has been proposed. In this inspection scheme, it has been assumed that a product lot consists of products manufactured through a single production line and lot quality characteristics follow a normal distribution. In the previous literature with respect to inspection schemes, it has been commonly assumed that lot quality characteristics obey a single normal distribution under the condition that all products are manufactured in the same condition. On the other hand, the production line is designed in order that the workload of respective processes becomes uniform from the viewpoint of line balancing. One of the solutions for the bottleneck process is to arrange the workshops in parallel. The lot quality characteristics from such a production line with the process consisting of some parallel workshops might not follow strictly the single normal distribution. Therefore, we expand an applicable scope of the above mentioned variable sampling inspection scheme with screening in this article. Concretely, we consider the variable sampling inspection with screening for the purpose of assuring the upper limit of average outgoing surplus quality loss in the production lots when the lot quality follows the mixed normal distribution.

• Structural Engineering and Mechanics
• /
• 제32권4호
• /
• pp.501-516
• /
• 2009

This paper aims to study the large deflections of variable-arc-length elastica subjected to the terminal forces (e.g., axial force and torque). Based on Kirchhoff's rod theory and with help of Euler parameters, the set of nonlinear governing differential equations which free from the effect of singularity are established together with boundary conditions. The system of nonlinear differential equations is solved by using the shooting method with high accuracy integrator, seventh-eighth order Runge-Kutta with adaptive step-size scheme. The error norm of end conditions is minimized within the prescribed tolerance ($10^{-5}$). The behavior of VAL elastica is studied by two processes. One is obtained by applying slackening first. After that keeping the slackening as a constant and then the twist angle is varied in subsequent order. The other process is performed by reversing the sequence of loading in the first process. The results are interpreted by observing the load-deflection diagram and the stability properties are predicted via fold rule. From the results, there are many interesting aspects such as snap-through phenomenon, secondary bifurcation point, loop formation, equilibrium configurations and effect of variable-arc-length to behavior of elastica.

• Structural Engineering and Mechanics
• /
• 제31권1호
• /
• pp.57-74
• /
• 2009

Power signals resulting from spindle and feed motor, present a rich content of physical information, the appropriate analysis of which can lead to the clear identification of the nature of the tool wear. The partial least-squares regression (PLSR) method has been established as the tool wear analysis method for this purpose. Firstly, the results of the application of widely used techniques are given and their limitations of prior methods are delineated. Secondly, the application of PLSR is proposed. The singular value theory is used to noise reduction. According to grey relational degree analysis, sample variable is filtered as part sample variable and all sample variables as independent variables for modelling, and the tool wear is taken as dependent variable, thus PLSR model is built up through adapting to several experimental data of tool wear in different milling process. Finally, the prediction value of tool wear is compare with actual value, in order to test whether the model of the tool wear can adopt to new measuring data on the independent variable. In the new different cutting process, milling tool wear was predicted by the methods of PLSR and MLR (Multivariate Linear Regression) as well as BPNN (BP Neural Network) at the same time. Experimental results show that the methods can meet the needs of the engineering and PLSR is more suitable for monitoring tool wear.

• 제어로봇시스템학회논문지
• /
• 제7권8호
• /
• pp.680-688
• /
• 2001

In this paper, the fuzzy control with variable input gain is applied to maintain the consistent tension in the process of taking up and releasing texture. In the process of discharging web on one side rolling it on another, the take-up drum gets smaller on the release drum side as it gets bigger on the rolling side, thus it is necessary to change the balance of velocity between the sides. In order to solve the problem a tension controller is necessary. The PI control method has been employed to maintain the consistent tension, but the PI control method produces a problem which requires an experienced worker with the traits of the machine, in order to perform the fine adjustments according to the environment of the process. For solving the above problem, we apply fuzzy control to the tension system, in order to produce a uniform roll. For the performance test, the fuzzy controller does not need to revise the parameters. Therefore the fuzzy controller exhibits an excellent additivity for the tension system where the system is changed with time.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.97-105
• /
• 2002

The use of rapid prototyping (RP) has reduced time to market, cut total costs and improved product quality by giving design and manufacturing teams the opportunity to verify and fine tune designs before committing them to expensive tooling and fabrication. In order to improve their unique characteristics according to the working principles, Variable Lamination Manufacturing process (VLM-ST) and corresponding CAD/CAM software (VLM-Slicer) is developed. The objective of this study is to improve the accuracy of VLM-ST process, and it can be done by offset fur cutting error correction, cutting path overrun fur sharp edge and reference shape generation for off-line stacking. It has been shown that, through the verification experiments for given practical shapes, the proposed algorithms are effective for diverse categories of three-dimensional shapes.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.63-69
• /
• 2017

The golden section search method is widely used to optimize a single design variable in many fields due to its superior advantages of search. In this paper, a new direct search method is proposed by modifying the search structure of the golden section search method; thus, it can be adapted in the optimization of a single design variable for the injection molding process. This proposed method is applied to determine an optimal gate position for the injection molding of a bezel of an automated teller machine for minimizing the injection pressure. Thus, an optimal gate position where the injection pressure is decreased by 4.5 MPa to that of the initial position was obtained with a small number of simulations. It is anticipated that the current proposed search method can be utilized as a practical tool for optimizing single variables for injection molding design.

• Journal of the Korean Data and Information Science Society
• /
• 제21권6호
• /
• pp.999-1008
• /
• 2010

공정을 모니터링 하기 위한 전통적인 관리도는 표본들 사이의 일정한 추출간격에서 일정한 수의 표본을 취하여 만들어 지는 고정추출율 관리도이다. 본 연구의 목표는 표준적인 고정추출율을 갖는 다변량 관리도에 비하여 성능이 우수한 가변추출간격을 갖는 다변량 관리도를 개발하는데 있다. 대부분의 다변량 관리도에 대한 연구는 공정의 평균벡터를 모니터링 하는데 초점이 맞추어져 있다. 그러나 본 논문에서는 공정의 평균벡터와 분산-공분산을 동시에 모니터링 하기 위한 다변량 관리도를 연구한다. 가변추출간격을 갖는 다변량 슈하르트 관리도에 대하여 연구 하고자 한다.

• 한국컴퓨터정보학회논문지
• /
• 제23권10호
• /
• pp.11-21
• /
• 2018

In this paper we propose a novel log template discovery algorithm which achieves high quality of discovered log templates through iterative log filtering technique. Log templates are the static string pattern of logs that are used to produce actual logs by inserting variable values during runtime. Identifying individual logs into their template category correctly enables us to conduct automated analysis using state-of-the-art machine learning techniques. Our technique looks at the group of logs column-wise and filters the logs that have the value of the highest proportion. We repeat this process per each column until we are left with highly homogeneous set of logs that most likely belong to the same log template category. Then, we determine which column is the static part and which is the variable part by vertically comparing all the logs in the group. This process repeats until we have discovered all the templates from given logs. Also, during this process we discover the custom patterns such as ID formats that are unique to the application. This information helps us quickly identify such strings in the logs as variable parts thereby further increasing the accuracy of the discovered log templates. Existing solutions suffer from log templates being too general or too specific because of the inability to detect custom patterns. Through extensive evaluations we have learned that our proposed method achieves 2 to 20 times better accuracy.