• 품질경영학회지
• /
• 제51권4호
• /
• pp.633-642
• /
• 2023

Purpose: The variation of the internal diameters of gun barrel incurs a lot of reworks in gun barrel manufacturing process and the significant quality problem of gun barrel. And it is likely to stem from the current measurement system for the internal diameter of gun barrel and the related manufacturing process as well. The purpose of this study is to improve the gun barrel manufacturing process through improving measurement system. Methods: The improved measurement system using laser can measure the internal diameters of gun barrel more accurately, and the properly adjusted honing process reduces the variation of internal diameters of gun barrel. Results: Comparing the mean square error of internal diameters for 6 gun barrels measured before and after process improvement shows that the variation of gun barrel internal diameters was significantly reduced after the process improvement. Conclusion: The introduction of improved measurement system for the internal diameters of gun barrel and the adjustment of related honing process results in the reduction of reworks of gun barrels and their internal diameter variations.

• 품질경영학회지
• /
• 제26권2호
• /
• pp.106-117
• /
• 1998

The following study has been undertaken to build QIP (Quality Improvement Process) of an inner-layer process in a PCB (Printed Circuit Board) manufacturing plant. The objective of the study is stabilization and optimization of the process through quality improvement. To do that, defective factors in process are gathered by the cause and effect analysis and classified by PFD (Process Flow Diagram), key factors are found out by PFMECA (Process Failure Mode and Effect Criticalty Analisis), DOE(Design of Experiments) is a, pp.ied to those key factors to optimize the process, SPC (Statistical Process Control) chart is used to maintain the optimal conditions of the process and to improve quality continuously, and a quality management system is developed to improve quality mind and quality system for the PCB jmanufacturing plant. Overall, QIP is established to improve quality for the PCB manufacturing plant in the study.

• 대한안전경영과학회지
• /
• 제24권3호
• /
• pp.93-103
• /
• 2022

This study investigated the method of continuous improvement of small-medium company production processes through POSCO's QSS(Quick Six Sigma) activities. QSS is a field operation technique that encompasses the advantages of Six Sigma, TPS(Toyota Production System), TQM (Total Quality Management), and IE(Industrial Engineering). Through this, POSCO not only encourages activities centered on related small and medium-sized partners, etc., but is also expected to contribute to the continuous improvement of the company's own production process through QSS activities. In this study, rather than unconditionally carrying out activities according to the needs of large companies, the research is to help the continuous improvement of the actual production process of small and medium-sized enterprises by effectively applying and spreading QSS activities in consideration of the characteristics and environment of the company. For this purpose, empirical research is conducted on the process improvement activities and QSS activities of company Y, which has less than 100 assembly and production quality and inspection processes among SMEs. The changes in the production process improvement of SMEs through the application of the final QSS were investigated through empirical studies.

• 기술혁신연구
• /
• 제14권2호
• /
• pp.143-165
• /
• 2006

By analyzing five in-depth case studies of suppliers in newly emerging Vietnam's motorcycle industry, this paper explores the differences in patterns and processes of capability improvement of suppliers who participate in different kinds of supplier-assembler network with different structures. The paper finds the correlation between the kinds of suppliers' capabilities improved and the structure of networks they participate in. While suppliers in arm-length networks can improve more upstream capabilities (structure design, process desist), suppliers in embedded networks can improve more downstream capabilities (process design, process setup, process maintenance and delivery control). Two capability improvement patterns of firms in newly emerging economy are indicated. The first pattern is asymmetrical improvement, either upstream or downstream capabilities, by participating in either arm-length or embedded networks. This pattern obstructs the suppliers to meet the requirements of new buyers rho come from different kinds of network. The second pattern is symmetrical improvement by joining both arm-length and embedded networks.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.273-278
• /
• 2022

Uncertainty is increasing around the world due to COVID-19 and Ukraine crisis. In this situation, each company is making countless efforts to survive. In Korea, smart factory projects targeting small and medium-sized businesses with difficulties have been continuously promoted. As for the smart factory business that has been promoted so far, the base expansion of the smart factory is also steadily increasing as the number of companies carrying out the project is increasing. It was also found that it contributed to productivity improvement and quality improvement. Despite these positive aspects, difficulties and operational problems are also appearing in the process of promoting smart factories. In this study, we investigated and analyzed operational problems and difficulties in the process of promoting smart factories. In addition, improvement plans for problems were presented according to the contents of this analysis, and improvement plans were presented by classifying them into introduction and supply companies, considering that the smart factory business is formed in the form of a consortium between introduction and supply companies.

• 품질경영학회지
• /
• 제42권4호
• /
• pp.633-646
• /
• 2014

Purpose: The conventional predicted MFTBF by military standard has a wide discrepancy to that of real-world operation, which leads to overstock and increase operation cost. This paper introduces a analyzing frame using operational reliability and cost data to overcome the discrepancy, and provides reliability improvement process employing the analyzing frame. Methods: This paper suggests Reliability-Cost Matrix (R-C Matrix) and Operational Reliability & Cost Index (ORCI) as a tool for reliability evaluation. Results: KOREIP(KAI's Operational Reliability Evaluation and Improvement Process) is developed employing Reliability-Cost Matrix and Operational Reliability & Cost Index. Conclusion: KOREIP provides a process and its activities based on Reliability-Cost Matrix frame. The process and activities leads reliability improvement of aerospace electronic equipments by means of categorizing and follow-up action based on the concept of frame.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.2021-2034
• /
• 2008

This paper shows the result of study on the process improvement/innovation based on CMMI(Capability Maturity Model Integration) for Development V1.2 staged representation in the view of engineering area of software, hardware and system. This paper intend to help rolling stock industry to define & innovate process and finally obtain certificate for achievement of CMMI V1.2 from SEI authorized SCAMPI Lead Appraiser through the introduction experienced by Hyundai Rotem Company(car-builder and supplier of electronic & electrical equipment) such as why CMMI-based process definition & improvement are planned and how each processes of CMMI V1.2 Level 3 have been implementing and how obtaining the certificate of CMMI Maturity Level 3 of CMMI for Development V1.2 staged representation etc. This paper shows the introduction to CMMI V1.2 model, process improvement methodology and CMMI appraisal on the basis of Standard $CMMI^{SM}$ Appraisal Method for Process Improvement($SCAMPI^{SM}$), V1.2. And, this paper shows about what kinds of activities/practices of 18 processes(CMMI Maturity Level 3) is essentially implemented to satisfy their's specific goal and general geal through Hyundai Rotem Company's experiences. This paper shows the advantage and problem by adopting CMMI V1.2 model. Especially, it present the corrective/preventive actions against the identified problem in order to improve processes.

• 경영과학
• /
• 제24권1호
• /
• pp.147-160
• /
• 2007

Six Sigma's concept has long been used as an effective way of restructuring the management process of a firm. In literature regarding Six Sigma, a number of successful cases were reported, where Six Sigma based management activities could enhance firm's strategic performance dramatically for year. However, there exist very few researches investigating the effect of Six Sigma on process innovation and quality improvement. Therefore this study propose a research model testing whether Six Sigma innovation could improve process innovation and quality improvement by industrial classification. We collected 332 valid questionnaires from expert in Six Sigma activities, and applied PLS. Empirical results showed that Six Sigma activities could contribute to process innovation and quality improvement.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2007년도 춘계학술대회
• /
• pp.437-448
• /
• 2007

This paper introduce information technology of software process assessment. It consists of eight parts such as concepts and introductory guide, a reference model for processes and process capability, performing an assessment, guide to performing assessments, an assessment model and indicator guidance, guide to competency of assessors, guide for use in process improvement, and guide for use in determining supplier process capability.

• 한국CDE학회논문집
• /
• 제13권3호
• /
• pp.235-242
• /
• 2008

This paper proposes a method for improving the process plan quality by use of dimensional tolerances. Dimensioning and tolerancing plays a key role in manufacturing process plan because the final part must ensure conformance with the dimensions and tolerances in its drawing. As a first step for the improvement of process plan quality, two resultant tolerances in design and process plan should be compared each other, and so a tolerance chart is used for acquisition and comparison of the two tolerances. In addition to two kinds of design and manufacturing tolerances, operational sequences or paths for the resultant dimension and tolerance are additionally recognized for measuring the quality of process plan quantitatively. Rooted tree is applied to find the related paths for the manufacturing resultant tolerances. A quality coefficient is defined by the components of two tolerances and their relations, the paths related to manufacturing resultant tolerances and the difficulty of an operation. In order to improve the quality of manufacturing process plan, the paths that two kinds of tolerances are the same or different in the rooted tree are recognized respectively and a method for tolerance rearrangement is developed. A procedure for improving the quality is suggested by combining the coefficient and the tolerance rearrangement method. A case study is applied to illustrate the efficiency of improvement method.