• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.55-63
• /
• 2021

Recently, as the problem of the traditional on-site labor-intensive construction production method has been raised due to changes in construction work labor and site conditions, the OSC method is gradually spreading as an alternative to this. Even in apartment houses, the application of the PC method is expanding centered on the underground parking lot, but the high cost structure is a problem compared to the conventional formwork method. In this study, factors affecting the calculation of construction cost in the economic evaluation, which are the core of determining the construction method for apartment buildings, are derived through domestic and foreign literature review and expert advice, the importance was analyzed through an opinion survey targeting industry experts. The measures to reduce construction cost were mainly derived from the improvement of the design and manufacturing process. It is expected that the factors affecting the construction cost and improvement measures of the PC method derived from this study will serve as a direction for technology development to spread the application of the PC method for apartment houses in the future.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.417-428
• /
• 2021

The combustion characteristics of anthracite, which follow a complex process with low reactivity, must be considered through the dynamic behavior of circulating fluidized bed (CFB) boilers. In this study, computational fluid dynamics (CFD) simulation was performed to analyze the combustion characteristics of anthracite in a pilot scale 0.1 MW_th Oxy-fuel circulating fluidized bed (Oxy-CFB) boiler. The 0.1MW_th Oxy-CFB boiler is composed of combustor (0.15 m l.D., 10 m High), cyclone, return leg, and so on. To perform CFD analysis, a 3D simulation model reactor was designed and used. The anthracite used in the experiment has an average particle size of 1,070 ㎛ and a density of 2,326 kg/m³. The flow pattern of gas-solids inside the reactor according to the change of combustion environment from air combustion to oxygen combustion was investigated. At this time, it was found that the temperature distribution in air combustion and oxygen combustion showed a similar pattern, but the pressure distribution was lower in oxygen combustion. addition, since it has a higher CO₂ concentration in oxygen combustion than in air combustion, it can be expected that carbon dioxide capture will take place actively. As a result, it was confirmed that this study can contribute to the optimized design and operation of a circulating fluidized bed reactor using anthracite.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.121-139
• /
• 2021

Technical documents in the construction field are changing from paper documents to electronic ones. As a result, the industry witnesses a trend of using portable electronic devices in searching or retrieving necessary information such as relevant regulations. Despite the improvement in the accessibility to general technical documents, a limitation is still found in accessing the electronic documents on the regulations. We see the barrier for field engineers to enhance their technical knowledge. One of major barriers is that videos, animations, and virtual reality information to enhance the visual understanding of technical content related to regulations are not linked. It is the interactive electronic technical manual (IETM) that can address such issues. The IETM is an electronic document system that enables real-time information acquisition while operating in the form of conversations with users by linking multimedia functions to document types such as specifications and guidelines. This study establishes a model of the IETM that can be operated in the planning stage of a construction project. The study also verifies its usability with a hypothetical case study. This study aims to improve the usability of the IETM in the construction project by analyzing the application effect of the IETM using the AHP technique.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.175-185
• /
• 2019

Purpose: The purpose of this study is to propose a direction planning integrated waterfront cultural city in terms of urban economic revitalization through regeneration of former industrial harborfront and the creation of cultural living spaces based on regional history in order to pursue urban activities. Method: Analyzing planning waterfront and historical cultural space based on MM21's development policy and strategy under the growth process and development of Yokohama. Results: MM21 is the core public project out of the six major projects promoted by Yokohama, which is on the brink of satellite cities for the expansion of Tokyo with a goal of qualitative transformation of former harbor. It is planned to be developed as a creative cultural waterfront city for an integrated urban development. Conclusion: Planning waterfront cultural city, which takes advantage of the former harbor city derived through MM21 analysis, provides the cityscape towards the sea and the port via the viewing point and opens the waterfront open to the port and the sea Space and Esplanade landscape development, preservation of historic buildings and cultural assets, recycling as cultural art space, waterfront space planning that cooperates with public culture art and pedestrian network.

• The Korean Journal of Franchise Management
• /
• v.10 no.3
• /
• pp.37-52
• /
• 2019

Purpose - This study examined the relationship between service quality, perceived value, customer satisfaction and behavioral intention of coffee shop using CoffeeSERV scale. In this model, CoffeeSERV scale consists of fundamental characteristics, physical environment, confidence, beverage characteristics, and representation factors. In particular, this study tried to demonstrate the moderating effect of customer's regulatory focus orientation among in the relationships between service quality, perceived value, customer satisfaction and behavioral intention. Research design, data, and methodology - This study intends to expand the existing service quality research by using the coffee shop service quality measurement tool developed by domestic researchers. I wanted to find some implications for the trend. In particular, this study applied the regulatory focus theory to identify individual differences of customers regulatory focusing motivation. In order to verify several hypotheses, the data were 227 college students and analyzed with SPSS/PC 21.0 and SmartPLS 3 program. The moderating role of customer's regulatory focusing motivation was tested using multi-group analysis with SmartPLS 3 program. Results - The resutls are as follows. First, the fundamental characteristic factors only had a significant influence on the utilitarian value perception, but in the hedonic value perception, all other service factors except for the beverage characteristic had a statistically significant effect. Second, utilitarian and hedonic value had significant effects on customer satisfaction. Third, customer satisfaction had a significant effect on behavioral intention. Finally, the regulatory focus orientation played a moderating role in the relationship between beverage characteristic - utilitarian value, representation - utilitarian value, fundamental characteristic - hedonic value, physical environment - hedonic value, confidence - hedonic value, and utilitarian value - behavioral intention. Conclusions - The results of this study show that the various service quality factors that make up the CoffeeSERV scale have different effects on utilitarian and hedonic value. This means that perceived benefits from product and service experience have different impacts on the customer's experience. Therefore, marketers should identify the impacts of service quality dimension that customers who use coffee shops consider important, understand the impact process of these quality factors on experience value, customer satisfaction, and behavioral intention, and allocate limited marketing budget. The results also show that it is possible to establish differentiatied response strategies using customer's regulatory focus orientation to find ways to enhance utlitarian and hedonic value, customer satisfaction, and behavioral intention using various Coffeeshop service quality factors. At the end of this paper, some limitations and future research directions were suggested.

• The Korean Journal of Franchise Management
• /
• v.11 no.2
• /
• pp.41-51
• /
• 2020

Purpose: Fast food franchise companies are trying a variety of innovative services to increase their competitiveness in response to changes in population composition in the fast food market and rapid changes in consumption trends due to technological development. From this point of view, franchise companies that have focused on offline store operations are providing O2O (offline to online) service as a core service for customer convenience. This new attempt is a strategy to increase loyalty by applying an interaction method based on understanding the characteristics of new generation consumers. However, existing studies are focused on the relationship between O2O service and acceptance, so very little is known about how O2O service affects customer loyalty. Therefore, this study examines the impacts of customer involvement and relative advantages of fast food O2O service on customer brand engagement (cognitive and affective engagement) and store loyalty for MZ(Millennials - Z) generations. Research design, data, and methodology: In order to achieve the purposes of this research, several hypotheses were developed. The data were collected from 247 questionnaires in their 16-30s and were analyzed using SPSS 22.0 and SmartPLS 3.0 program. Measurement model analysis was carried out to assess convergent and discriminant validity. Also, common method bias was tested using the values of VIF (variance inflation factor). The hypotheses was tested using structural equation modeling. Result: First, involvement has a positive effect on cognitive and affective engagement. Second, relative advantages have has a positive effect on cognitive and affective engagement. Third, cognitive influences affective engagement. Finally, both cognitive and affective engagement affect store loyalty, but affective engagement has a stronger effect on store loyalty than cognitive engagement. Conclusions: In the process of consumer-brand interaction, it was confirmed that store loyalty was influenced by cognitive and affective engagement sequentially. However, the results show that affective engagement has a relatively stronger on store loyalty than cognitive engagement. Therefore, it is necessary to establish an O2O service strategy to maintain long-term loyal customers by inducing cognitive participation with high-involved consumer, as well as affective interaction, in order to obtain new customers and increase customer loyalty.

• Journal of Convergence for Information Technology
• /
• v.11 no.1
• /
• pp.136-142
• /
• 2021

Open-pit mine development requires continuous management because of topographical changes and there is a risk of accidents if the current status survey is performed directly in the process of calculating the earthwork. In this study, the application of UAV photogrammetry, which can acquire spatial information without direct human access, was applied to open-pit mines development area and analyzed the accuracy, earthwork, and mountain restoration plan to determine its applicability. As a result of accuracy analysis at checkpoint using ortho image and Digital Surface Model(DSM) by UAV photogrammetry, Root Mean Square Error(RMSE) is 0.120 m in horizontal and 0.150 m in vertical coordinates. This satisfied the tolerance range of 1:1,000 digital map. As a result of the comparison of the earthwork, UAV photogrammetry yielded 11.7% more earthwork than the conventional survey method. It is because UAV photogrammetry shows more detailed topography. And result of monitoring mountain restoration showed possible to determine existence of rockfall prevention nets and vegetation. If the terrain changes are monitored by acquiring images periodically, the utility of UAV photogrammetry will be further useful to open-pit mine development.

• Conservation Science in Museum
• /
• v.25
• /
• pp.63-84
• /
• 2021

In order to investigate the diverse physicochemical changes that occurred in traditional Korean pottery during its production, including before and after firing, this study produced six replicas of a celadon maebyeong inlaid with cloud-and-crane designs, respectively corresponding to the process of shaping, carving, inlaying designs, first firing, glazing and second firing, respectively. It then conducted a scientific study of these six replicas and analyzed their images through high-resolution three-dimensional transmission imaging. The materials used for the replicas show different mineral phases and even colors depending on the components of each material. For example, black inlay with a high content of iron oxide (Fe₂O₃) shows dark colors and white inlay with a high alumina (Al₂O₃) content appears white. Physicochemical properties such as chromaticity and magnetic susceptibility and major components of the replicas were confirmed by the differences in the density in the computed tomography (CT) images. The characteristics of fired products such as fine structure, absorption ratio, apparent porosity, and other characteristics of the major mineral components were identified by the presence of pores and the formation of cracks inside the replicas in the image analysis.

• The Journal of the Korea Contents Association
• /
• v.21 no.5
• /
• pp.488-498
• /
• 2021

This study applied Flipped Learning teaching and learning method to Basics Cooking Practice Subject using YouTube. The purpose of this study is to investigate whether the curriculum is properly progressing by grasping the effects of before and after learning and analyzing learners' subjectivity through the learning process. The investigation period was conducted from August 01, 2020 to September 10, 2020. According to the research design of Q Methodology, it was divided into five stages: Q sample selection, P sample selection, Q sorting, coding and recruiting, conclusion and discussion. As a result of the analysis, the first type (N=5): Prior Learning effect, the second type (N=7): Simulation practice effect, and the third type (N=3): self-efficacy effect. As a result, by applying the flipped learning teaching method of the Basics Cooking Practice Subject using YouTube, positive effects such as inducing interest in the class and increasing confidence were found in active learners, but some learners lacked understanding of the system of the class operation method. However, the lack of number of training sessions compared to other subjects is considered to be a solution to be solved later.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.153-160
• /
• 2022

This study presents the bogie arrangement of the load-out system for on-ground shipbuilding. The load-out system is one of the most important systems to perform the bogie arrangement of the on-ground shipbuilding technique without dry dock facilities, and this system is composed of four pieces of equipment: bogies, driving bogie with motors, trestles, and power packs. Also, the bogie arrangement analysis (BAA) is employed to simply calculate the reaction forces at the trestle for structural safety. In this context, the purpose of this study is to propose an optimal design method to perform the bogie arrangement satisfying structural safety requirements with minimal cost. It is expected that the proposed methodology will contribute to the effective practice as well as to the improvement of competitive capability for shipbuilding companies at the on-ground shipbuilding stage. Furthermore, we describe some problems and their solutions of the deformation that may occur in the bottom of the hull during the load-out process. As a result, it is shown that we applied it to the 114K crude oil tanker (Minimum bogie 54EA) and the 174K CBM LNG carrier (Minimum bogie 88EA), it can minimize the number of bogie and critical risks (Safety rate 1.61) during the load-out of on-ground shipbuilding. Through this study, the reader will be able to learn successful load-out operation and economic shipbuilding in the future.