• 전자공학회논문지 IE
• /
• 제47권4호
• /
• pp.18-27
• /
• 2010

본 논문은 회전체의 진동 데이터를 효율적으로 획득하기 위해 데이터 획득 시스템을 설계하였다. 데이터획득 장치는 필터와 증폭기로 구성한 아날로그 로직과 ADC와 DSP, FPGA, FIFO 메모리를 갖고 있는 디지털로직으로 구성하였다. 센서로부터 회전체의 진동신호는 아날로그 로직을 통과하여 FPGA에 의해 제어되고, 그 신호는 ADC를 통해 변환되고 FIFO 메모리에 저장하였다. 디지털 선호 처리는 FPGA 제어어의해서 FIFO 메모리에 들어온 데이터를 이용하여 DPS에서 신호처리를 수행할 수 있도록 구성하였다. 회전체 진동을 진단 및 분석하기 위한 진동 요소는 데이터 선호로서 실수 변환, Peak to Peak, 평균 값 산출, GAP, 디지털 필터, FFT 둥을 DSP에서 처리하고 설정된 이벤트를 추적하며, 그 결과 값을 도출하여 조기 경보 구축하였다 묘든 신호처리 과정 및 이벤트 추적은 여러 분석 단계 의해서 처리 시간이 소요되며, 특정 이벤트에 따라 처리 소요 시간에도 변동이 발생한다. 데이터 획득 및 처리는 연속적으로 실시간 분석을 수행해야 하지만, DSP에서는 입력된 신호를 처리하는 동안에 입력된 이후의 데이터에서 다음 입력처리 시간동안 획득한 데이터는 처리 될 수 없고, 특히 다수의 채널에서는 더 많은 데이터 손실이 일어날 수 있다. 따라서 본 논문에서는 데이터 손실이 적고 빠른 처리를 위하여 DPS와 FPGA을 효과적인 사용하였고, 이러한 여러 분석 단계 신호처리에서 발생되는 시간을 최소한으로 줄일 수 있는 방법으로 DSP에서 처리되는 신호단계 중 일부를 FPGA에서 처리할 수 있도록 설계 하였고 그리고 단일의 신호 처리에 의해 수행되는 분석 단계를 병렬 처리로 데이터를 실시간으로 처리하였다. 그 결과로 DSP 만으로 구성된 신호처리 보다 DSP와 FPGA로 구성된 시스템이 훨씬 빠르고 안정된 신호 처리 방법을 제시하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.329-332
• /
• 2000

This paper proposed resource allocation algorithm for the minimum power consumption of functional unit in high level synthesis process as like DSP which is circuit to give many functional unit. In this paper, the proposed method though high level simulation find switching activity in circuit each functional unit exchange for binary sequence length and value bit are logic one value. To used the switching activity find the allocation with minimal power consumption, the proposed method visits all control steps one by one and determines the allocation with minimal power consumption at each control step.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.188-190
• /
• 1986

In this paper, we describe an optical detection at the front and design an on-off control system of spray gun for economical paint spray when painted on hanger any things that it have arbitrary two-dimensional image. The objectives of this paper that, as changing of software, find useful logic variation of spray, and are to enhance of environments for workman and to decrease economical loss of painting.

• 제어로봇시스템학회논문지
• /
• 제3권3호
• /
• pp.305-310
• /
• 1997

In this paper, a fuzzy set based machine-cell formation algorithm for cellular manufacturing is presented. The fuzzy logic is emoloyed to express the degree of appropriateness when alternative machines are specified to process a part shape. For machine grouping, the similarity coefficient based approach is used. The algorithm produces efficient machine cells and part families which maximize the similarity values.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1129-1132
• /
• 1993

This paper presents the idea of a neural fuzzy controller with application to the control of an industrial machining process. The structure of such a controller, which links the idea of a fuzzy controller and a neural network, is suggested. Results of comparative simulations indicate that the proposed neural fuzzy controller performs equally well as a fuzzy logic controller; moreover, it is more flexible and allows faster data processing.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.281-292
• /
• 2019

This paper proposed a new technology to control a path forging parts in limited narrow space of manufacturing process automation for smart factory. In the motion control, we adapted the obstacle avoidance technology based on ultrasonic sensors. The new motion control performance test for a mobile robot is experimented in narrow space environments. The travelling path control is performed by a fuzzy control logic. which plays a role for selecting an appropriate behavior in accordance with the situation in the vicinity of the mobile robot. Ultrasonic sensors installed at the front face of the mobile robot are used. In order to update the current position and heading angle of the mobile robot, a new approch is adapted. The reliability is illustrated by simulation and experiments.

• Structural Engineering and Mechanics
• /
• 제82권4호
• /
• pp.445-458
• /
• 2022

Some of the control systems used in engineering structures that use sensors and decision systems have some time delay reducing efficiency of the control system or even might make it unstable. In this research, in addition to considering the effect of the time delay in vibration control process, predictive control is used to compensate the time delay. A semi-active vibration control approach with the help of magneto-rheological dampers is implemented. In addition to using fuzzy inference system to determine the appropriate control voltage for MR damper, structural behavior prediction system and specifying future responses are also used such that the time delays occurring within control process are overcome. For this purpose, determination of prediction horizon is conducted for one, five, and ten steps ahead for single degree of freedom structures with periods ranging from 0.1 to 4 seconds, subjected to twenty earthquake excitations. The amount of time delay applied to the control system is 0.1 seconds. The obtained results indicate that for 0.1 second time delay, average prediction error values compared to the case without time delay is 3.47 percent. Having 0.1 second time delay in a semi-active control system reduces its efficiency by 11.46 percent; while after providing the control system with structure behavior prediction, the difference in the results for the control system without time delay is just 1.35 percent on average; indicating a 10.11 percent performance improvement for the control system.

• 한국지능시스템학회논문지
• /
• 제8권6호
• /
• pp.37-47
• /
• 1998

본 논문은 진화 연산 알고리즘과 퍼지 로직을 이용하여 고속 열처리 공정기의 웨이퍼 온도를 제어하는 제어기 설계 방법을 제안한다. 전체 제어기는 기준 온도의 정상 상태의 추종을 위한 앞먹임 정적 제어기, 과도 상태의 추종을 위한 앞먹임 동적 제어기, 그리고 온라인 상에서 모델링 오차나 외란을 극복하기 위한 되먹임 오차 제어기로 구성된다. 앞먹임 제어기들은 퍼지 로직을 이용하여 모든 동작점에서 제어 입력을 구해주는 전역적 비선형 제어기로 구성된다. 각 제어기들의 제어 파라미터는 진화 연산 알고리즘을 이용하여 추정되므로 수학적 모델식을 모르는 경우에도 제어기를 설계할 수 있는 장점이 있다. 끝으로 모의 실험을 통하여 제어기의 성능을 검증한다.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.448-457
• /
• 1998

A neural network based control algorithm with fuzzy compensation is proposed for the automated adjustment in the production of electronic end-products. The process of adjustment is to tune the variable devices in order to examine the specified performances of the products ready prior to packing. Camcorder is considered as a target product. The required test and adjustment system is developed. The adjustment system consists of a NNC(neural network controller), a sub-NNC, and an auxiliary algorithm utilizing the fuzzy logic. The neural network is trained by means of errors between the outputs of the real system and the network, as well as on the errors between the changing rate of the outputs. Control algorithm is derived to speed up the learning dynamics and to avoid the local minima at higher energy level, and is able to converge to the global minimum at lower energy level. Many unexpected problems in the application of the real system are resolved by the auxiliary algorithms. As the adjustments of multiple items are related to each other, but the significant effect of performance by any specific item is not observed. The experimental result shows that the proposed method performs very effectively and are advantageous in simple architecture, extracting easily the training data without expertise, adapting to the unstable system that the input-output properties of each products are slightly different, with a wide application to other similar adjustment processes.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권2호
• /
• pp.187-192
• /
• 2004

In this paper, we proposed the method to design fuzzy controller using the experience of the operating expert and experimental numeric data for the robust control about the noise and disturbance instead of the traditional PID controller for the main steam temperature control of the thermal power plant. The temperature of main steam temperature process has to be controlled uniformly for the stable electric power output. The process has the problem of the hunting for the cases of various disturbances. In that case, the manual action of the operator happened to be introduced in some cases. We adopted the TSK (Takagi-Sugeno-Kang) model as the fuzzy controller and designed the fuzzy rules using the informations extracted directly from the real plant and various operating condition to solve the above problems and to apply practically. We implemented the real fuzzy controller as the Function Block module in the DCS(Distributed Control System) and evaluated the feasibility through the experimental results of the simulation.