• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.111-118
• /
• 2023

In this study, the feasibility of laser patterning on the surface of food packaging polymer film was confirmed, and the surface patterning process conditions of femtosecond laser were established. In addition, it was proved that the surface properties of the film can be changed and controlled through the fabrication of various patterned films on the surface of food packaging films such as HDPE, PP, and PET. Various patterned surfaces, including large-scale circular patterns induced by a single femtosecond laser pulse, roughness patterns achieved by overlapping single pulses by 30%, straight line patterns, roughness patterns obtained by overlapping straight line patterns, and grid patterns formed by intersecting straight line patterns were fabricated. The characteristics of the patterned HDPE, PP, and PET films, based on the surface pattern structure and size, were analyzed using SEM, AFM, and contact angle measurements. Compared to the surface of each control film without femtosecond laser patterning, the contact angles of the surfaces of large-area circular patterning HDPE and PP films, large-area roughness patterning HDPE and PP films by overlapping 30% of single pulses, and large-area roughness patterning PET film by overlapping rectilinear patterning were in the range of 27.1-37.5 degree. This indicated that the HDPE, PP, and PET films became more hydrophilic after patterning. On the other hand, the HDPE film patterned with a large-scale grid pattern exhibited a contact angle of 120.4 degree, indicating that the HDPE film became more hydrophobic after patterning. Therefore, films that have been changed to hydrophilic surfaces through patterning can be used in anti-fouling applications where proteins, cells, viruses, and other food materials do not adhere or are easily detached. In addition, if a superhydrophobic surface of 150 degrees or more is fabricated through more precise lattice patterning in the future, it will be possible to use it for superhydrophobic surface applications such as self-cleaning.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.2
• /
• pp.1-20
• /
• 2023

The purpose of this study is to extract and analyze ecological citizenship elements in the middle school home economics textbook used in the 2015 national curriculum for the introduction of ecological transformation education in the 2022 national curriculum. As a result of the analysis, the content analysis of the ecological citizenship factor was validated by six experts who are incumbent middle school home economics teachers, and the S-CVI value was 0.97, ensuring the validity of the ecological citizenship factor analysis. The results of analyzing 242 ecological citizenship factors extracted from home economics textbooks are as follows. According to the content area of the 2015 national home economics curriculum, the 'human development and family' area had the highest presence of ecological citizenship factors followed by the 'resource management and self-reliance' area and the 'home life and safety' area. Among the categories of ecological citizenship factors, 'value⋅attitude' was the most frequent, followed by 'process⋅function' and 'knowledge⋅understanding'. For each textbook composition system, ecological citizenship elements were extracted in the order of pictures, text, activities, and supplementary materials. There was a significant variation in the number of ecological citizenship factors among publishers, indicating the importance of the textbook writers' perception, interpretation, and direction of writing. Based on these analysis results, ecological citizenship teaching and learning activities applicable to home economics education were presented. This study highlights the potential for practicing ecological citizenship education in line with the new orientation of the curriculum on ecological transformation education through home economics education. Furthermore, it provides valuable baseline data for the development and implementation of textbooks for the 2022 national curriculum.

• Journal of the Daesoon Academy of Sciences
• /
• v.45
• /
• pp.153-186
• /
• 2023

Since the 2000s, Korean society has been transitioning into a multicultural society with a sharp increase in the influx of various non-Koreans including immigrant workers, immigrant spouses, international students, and refugees. As a result, Korea, which had maintained religious peace and coexistence as a multi-religious society, is showing signs of increased risks of social problems such as the surfacing of conflicts between religions. Religion can contribute to the integration and safety of communities in the process of becoming a multicultural society, but at the same time, it requires discussion from an educational perspective because of its ambivalence in potentially causing conflict within communities. Considering that one of the main functions of religion is social integration, religious education is required for the stable settlement of multicultural societies. In recognition of this, discussion regarding a new perspective on religious education is needed to respond to religious diversity and to understand the current society and the means of becoming a global citizen. This new discussion would be a 'general religious education' model that provides an education covering various religious and non-religious worldviews in order to cultivate 'religious literacy.' However, in a multicultural society, while general religious education may be useful in reducing prejudice and discrimination among students in an integrated environment, it should also be recognized that a 'special religious education' would be needed to acknowledge the unique values of each human group. This would be the most effective approach to multiculturalism. Therefore, this study proposes a form of 'cooperative religious education,' which combines general religious education and special religious education as a direction for religious education. In providing readers with background context, this study will review Korean religious policies and religious education, and then present realistic methods that can be implemented in schools.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.317-321
• /
• 2022

In response to Incheon tap water accident in 2019, the Ministry of Environment has created the "Comprehensive Measures for Water Safety Management" to improve water operation management, provide systematic technical support, and respond to accidents. Accordingly, K-water is making a smart water supply management system for the entire process of tap water. In order to advance the response to water accidents, it is essential to secure the reliability of real-time water operation data such as flow rate, pressure, and water level, and to develop and apply a warning algorithm in advance using big data analysis techniques. In this paper, various statistical techniques are applied using water supply operation data (flow, pressure, water level, etc) to prepare the foundation for the selection of the optimal operating range and advancement of the monitoring and alarm system. In addition, the arrival time is analyzed through cross-correlation analysis of changes in raw water turbidity between the water intake and water treatment plants. The purpose of this paper is to study the model that predicts the raw water turbidity of a water treatment plant by applying raw water turbidity data considering the time delay according to the flow rate change.

• Clean Technology
• /
• v.16 no.4
• /
• pp.258-264
• /
• 2010

This study estimated the possibility of phosphate removal characteristics to utilize EAF(electric arc furnace) slag as submarine cover material. The major phosphate removal mechanism was a certain formation of HAP precipitation occurred by the ionization reaction between $Ca^{2+}$ and $OH^-$, which were leached from the EAF Slag. Another phosphate removal mechanism was the adsortion of EAF slag surface. As a result of $PO_4{^-}-P$ removal characteristics using continuous column reactor, $PO_4{^-}-P$ concentration decreased rapidly after 3 days and 10 days later, it show under 0.5 ppm. The result as applied in real sea water, shows that the phosphate removal effects were 93~98% by the subaqueous sediment removal using the EAF slag. In conclusion, EAF slag is useful in $PO_4{^-}-P$ removal and control and it is possible to use without additional process like crush and selection.

• Korean Journal of Veterinary Research
• /
• v.62 no.4
• /
• pp.29.1-29.7
• /
• 2022

Vaccination against Newcastle disease (ND) is the most effective means of controlling the disease, and these vaccines are commercialized only after their safety and effectiveness have been verified through tests that comply with Korean Standards of National Lot Release for Veterinary Biologics. This study investigated whether a relatively convenient and safe serological test can be used in place of the challenge test using highly virulent ND virus. Hemagglutination inhibition (HI) assay and enzyme-linked immunosorbent assay (ELISA) were considered positive of log₂ 2 or more and cutoff value of 200 or more, respectively, in both live and inactivated vaccines. However, when the antibody levels of the live and inactivated vaccines induced using the Ulster 2C, KBNP-C4152R2L, and K148/08 strains were compared, the antibody titers for inactivated vaccines were significantly higher than those for live vaccines in both the HI assay and ELISA. A strong positive correlation was observed between HI and ELISA antibody titers. The live vaccines corresponded to a survival rates of ≥ 80% and the inactivated vaccines corresponded to 100% survival rates. This study confirmed that standard efficacy tests can serve as serological tests, and can replace the challenge test and that the vaccine approval process can be improved.

• Journal of Life Science
• /
• v.33 no.4
• /
• pp.371-381
• /
• 2023

Endocrine disrupting chemicals (EDCs), used in a variety of products in modern society, are hormone-like substances that cause various diseases. Humans are exposed to EDCs through their inclusion in pesticides, plastics, cosmetics, detergents, and drugs. Bisphenol A (BPA), one of the representative endocrine disruptors, is an estrogen-like substance that has been widely used commercially in plastic and epoxy resins. BPA is a chemical that can disrupt the endocrine system, leading to reduced reproductive function, obesity, cancer, and neurodevelopmental disorders. Since the adverse health effects of BPA began to be reported the use of BPA has been regulated worldwide. Various alternatives to BPA have been widely used worldwide; representatively, bisphenol S (BPS) and bisphenol F (BPF) are the most commonly used in commercial contexts. BPS and BPF may cause endocrine-disrupting effects like those of BPA due to their similar chemical structures. Recent studies have reported that BPS and BPF disrupt the neurodevelopmental process and cause neurodevelopmental disorders. Therefore, future studies will be required for safety verification of BPA alternatives and the development of new alternatives to BPA for brain health. In this review, we reviewed the effects of BPA and the alternatives, BPS and BPF, on the nervous system.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.2
• /
• pp.267-277
• /
• 2017

One of fundamental problems in developing robust distributed services is how to achieve distributed consensus agreeing some data values that should be shared among participants in a distributed service. As one of algorithms for distributed consensus, Raft is known as a simple and understandable algorithm by decomposing the distributed consensus problem into three subproblems(leader election, log replication and safety). But, the algorithm dose not mention any types of dynamic configuration of participant peers such as adding new peers to a consensus group or deleting peers from the group. In this paper, we present a new consensus algorithm named Raft-D, which supports the dynamic configuration of participant peers by extending the Raft algorithm. For this, Raft-D manages the additional information maintained by participant nodes, and provides a technique to check the connection status of the nodes belonging to the consensus group. Based on the technique, Raft-D defines conditions and states to deal with adding new peers to the consensus group or deleting peers from the group. Based on those conditions and states, Raft-D performs the dynamic configuration process for a consensus group through the log update mechanism of the Raft algorithm.

• Advanced Industrial SCIence
• /
• v.2 no.2
• /
• pp.9-15
• /
• 2023

Since silicone rubber heaters are flexible, they can be directly attached or installed in objects to be heated even in flat, curved or three-dimensional shapes. Since the current heating method heats the entire object to be heated and raises it to a required temperature, ignoring areas or positions where heat is not required, partial intensive heating cannot be performed. When using multi-heating zones, rather than heating the entire object to be heated, only the parts that need heat are intensively heated according to the process, so it is possible to heat quickly by local location by applying different amounts of heat with a small amount of electric capacity to each place that needs heat, and heat energy can reduce. In this study, the temperature and heating time of the partially concentrated region in the multi-heating region structure are measured so that a uniform temperature or temperature difference occurs in the region requiring thermal fusion. In order to determine the optimal power density range and reduce capacitance, the safety of a silicon rubber heater manufactured with a multi-heating zone structure is investigated. If the silicon rubber heater is manufactured in a multi-heating method, the multi-intensive heating technology can be ideally applied to all heating processes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.211-219
• /
• 2010

The design concept of high speed railway bridges is applied to a method for increasing the stiffness of existing bridge structures considering the impact factor by a static load. Generally, the process of structural design would be relied upon an advanced foreign technology. However, the dynamic amplification factor (DAF) and dynamic capacity assessment of high speed railway bridges may be conducted essentially a detailed estimation because the resonance phenomenon is affected by the long length (380 m) and high speed (300 km/h) moving of a high speed railway (Korea Train eXpress: KTX). Therefore, this study will be examined the dynamic capacity of the typical PSC Box Girder high speed railway bridge efficiently, and offered the basic information for the reasonable structural design. For this, the static analysis is conducted considering the load line diagram of KTX based upon existing references. In addition, the KTX moving load is transformed into the time series load considering various analytical variables. The time history analysis is assessed reasonable using the transformed time series load. At that time, analytical variables for calculating the time series load are considered loading node distance, time increment and KTX velocity variation etc. The dynamic capacity of the PSC Box Girder high speed railway bridge is examined based upon the FE analysis result systematically. The structural safety is assessed quantitatively in accordance with the related regulation of the inside and outside of the country.