• Korean Journal of Materials Research
• /
• v.27 no.6
• /
• pp.339-344
• /
• 2017

A series of $CaNb_2O_6:Dy^{3+}$, $CaNb_2O_6$:$Eu^{3+}$ and $CaNb_2O_6:Dy^{3+}$, $Eu^{3+}$ phosphors were prepared by solid-state reaction process. The effects of activator ions on the structural, morphological and optical properties of the phosphor particles were investigated. XRD patterns showed that all the phosphors had an orthorhombic system with a main (131) diffraction peak. For the $Dy^{3+}$-doped $CaNb_2O_6$ phosphor powders, the excitation spectra consisted of one broad band centered at 267 nm in the range of 210-310 nm and three weak peaks; the main emission band showed an intense yellow band at 575 nm that corresponded to the $^4F_{9/2}{\rightarrow}^6H_{13/2}$ transition of $Dy^{3+}$ ions. For the $Eu^{3+}$-doped $CaNb_2O_6$ phosphor, the emission spectra under ultraviolet excitation at 263 nm exhibited one strong reddish-orange band centered at 612 nm and four weak bands at 536, 593, 650, and 705 nm. For the $Dy^{3+}$ and $Eu^{3+}$-codoped $CaNb_2O_6$ phosphor powders, blue and yellow emission bands due to the $^4F_{9/2}{\rightarrow}^6H_{15/2}$ and $^4F_{9/2}{\rightarrow}^6H_{13/2}$ transitions of $Dy^{3+}$ ions and a main reddish-orange emission line at 612 nm resulting from the $^5D_0{\rightarrow}^7F_2$ transition of $Eu^{3+}$ ions were observed. As the concentration of $Eu^{3+}$ ions increased from 1 mol% to 10 mol%, the intensities of the emissions due to $Dy^{3+}$ ions rapidly decreased, while those of the emission bands originating from the $Eu^{3+}$ ions gradually increased, reached maxima at 10 mol%, and then slightly decreased at 15 mol% of $Eu^{3+}$. These results indicate that white light emission can be achieved by modulating the concentrations of the $Eu^{3+}$ ions incorporated into the $Dy^{3+}$-doped $CaNb_2O_6$ host lattice.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.245-253
• /
• 2009

For the growth optimization of InAs/GaSb (8/8-ML) strained-layer superlattice (SLS), the structure has been grown under various conditions and modes and characterized by the high-resolution x-ray diffraction (XRD) analysis. In this study, the strain modulation is induced by changing parameters and modes, such as the growth temperature, the ratio of V/III beam-equivalent-pressure (BEP), and the growth interruption (GI), and the strain variation is analyzed by measuring the angle separation of 0th-order satellite peak in XRD patterns. The XRD results reveal that the growth temperature and the V/III(Sb/Ga) ratio are major parameters to change the crystallineity and the strain modulation in SLS structures, respectively. We have observed that the SLS samples with compressive strain prepared in this study are show a transition to tensile strain with decreasing V/III(Sb/Ga) ratio, and the GI process is a sensitive factor giving rise to strain modulation. These results obtained in this study suggest that optimized growth temperature and V/III(Sb/Ga) ratio are $350^{\circ}C$ and 20, respectively, and the appropriate GI time is approximately 3 seconds just before InAs growth that the crystallineity is maximized and the strain relaxation is minimized.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.1
• /
• pp.73-84
• /
• 2010

We studied the geological occurrence, associated minerals, mineralogical properties and formation process of tremolites from two abandoned asbestos mines, Jungang (Sinsuk) and Daebosuksan, located in Boryoung area, Chungnam. Morphologically different tremolites such as long fibrous, needle-like, bladed and prismatic forms coexisted. Fibrous tremolite, known for its high toxieity to human health, was systematically analyzed by polarized light microscopy and scanning electron microscopy. The average length of tremolite fibers was 31.2 ${\mu}m$ although the maximum length of some asbestos was 210.0 ${\mu}m$. The average width and aspect ratio were 1.6 ${\mu}m$ and 19.9, respectively. Tremolite showed inclined extinction in the range of 6.1~20.2$^{\cric}$. X-ray diffraction patterns were slightly different between fibrous (asbestiform) and prismatic (non-asbestiform) tremolites. EPMA analysis of tremolites in the study area indicated extremely high Mg content with very low Fe content, close to the composition of tremolite in end-member in the tremolite-actinolite solid solution series. The formational conditions of asbestiform and non-asbestiform tremolite appear to be different. Asbestiform tremolite was estimated to have been formed in later stage.

• Korean Journal of Microbiology
• /
• v.41 no.4
• /
• pp.246-254
• /
• 2005

Analysis of the complete genome of Neurospora crassa reveals that at least 19 proteins contain tetratricopeptide repeat (TPR) motifs. One of them shows over $60\%$ homology to Ssn6 of Saccharomyces cerevisiae, a universal repressor that mediates repression of genes involved in various cellular processes. Mutant strains generated by RIP (repeat-induced point mutation) process showed four distinctive vegetative growth patterns and slow growth in various rates. Firstly, a mutant showed denser mycelial growth, yellow, csp, and looked like ropy mutant. Secondly, slower growth, dense mycelial, and conidial phenotype. Thirdly, extremely slower growth and aconidial. And finally, flat, tittle aerial hyphae, acon, and similar with a rco-1 RIP mutant. They are all male-fertile, yet female-sterile and produced little or no perithecium. It seems that various phenotypes were occurred depending upon mostly likely, the degree of RIP. These results indicate that this gene may be involved in several cellular possess during vegetative growth, and asexual and sexual development. Therefore it is pleiotropic. Sequence analysis of cDNA shows that it encodes a putative 102 kDa protein composed of 917 amino acids, and has six introns. It is designated rcm-1 (regulation of conidiation and morphology).

• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.634-638
• /
• 2011

We report growth of epitaxial AlN thin films on c-plane sapphire substrates by plasma-assisted molecular beam epitaxy. To achieve two-dimensional growth the substrates were nitrided by nitrogen plasma prior to the AlN growth, which resulted in the formation of a two-dimensional single crystalline AlN layer. The formation of the two-dimensional AlN layer by the nitridation process was confirmed by the observation of streaky reflection high energy electron diffraction (RHEED) patterns. The growth of AlN thin films was performed on the nitrided AlN layer by changing the Al beam flux with the fixed nitrogen flux at 860$^{\circ}C$. The growth mode of AlN films was also affected by the beam flux. By increasing the Al beam flux, two-dimensional growth of AlN films was favored, and a very flat surface with a root mean square roughness of 0.196 nm (for the 2 ${\mu}m$ ${\times}$ 2 ${\mu}m$ area) was obtained. Interestingly, additional diffraction lines were observed for the two-dimensionally grown AlN films, which were probably caused by the Al adlayer, which was similar to a report of Ga adlayer in the two-dimensional growth of GaN. Al droplets were observed in the sample grown with a higher Al beam flux after cooling to room temperature, which resulted from the excessive Al flux.

• Journal of Life Science
• /
• v.17 no.5 s.85
• /
• pp.613-618
• /
• 2007

Azoospermia factor(AZFa, b, and c) regions have been focused on their involvement in the spermatogenic process by frequent observation of microdeletion in male infertility. Among the azoospermia factors, RBMY1, CDY1, and VCY2 genes are strongly associated with the male germinal cell differentiation and development in testis. Using RT-PCR approach, expression patterns of RBMY1, CDY1, and VCY2 genes are examined in testicular biopsy specimens from 42 Korean azoospermic patients. No expression of RBMY1, CDY1, and VCY2 genes appeared as 34%, 66%, and 27% of the male infertility, respectively. Patients who had no expression of RBMY1 and VCY2 genes also showed negative expression of the CDY1 gene in their testis tissues. All Sertoli cell-only syndrome patients showed no expression of the CDY1 gene. Taken together, the CDY1 gene expression seems to be necessary factor to complete spermatogenesis in Korean population.

• Journal of Life Science
• /
• v.12 no.3
• /
• pp.317-324
• /
• 2002

We investigated the compositional changes of glycoconjugates (GCs) and expression of estrogen receptor (ER)-$\alpha$, c-fos and c-jun in the vagina of normal and ovariectomized rats by histochemical and immunohistochemical methods. The mucinous transformation of the superficial layer that occurred from late diestrus to proestrus was accompanied with extensive enrichment of GCs. According to the cyclic changes of the vagina, distinct reactivity patterns such as SBA affinity in the diestrus and Con A affinity in the diestrus and estrus phase was observed. However, weak staining for GCs was detected in the atrophied vaginal epithelium of ovariectomized rats. ER-$\alpha$ immunoreaction was mainly demonstrated in the basal layer of epithelium and estrus cycle-related variation in the number of ER-$\alpha$ immunoreaction were not pronounced. But the stromal cells showing ER-$\alpha$ immunoreaction were abundantly observed from diestrus to estrus phase. The most numerous c-fos immunoreactive cells were observed in the basal and intermediate layer of epithelium and stromal fells from the proestrus to estrus phase and c-jun in the basal layer of epithelium during estrus phase. The c-jun immunoreaction of stromal cells expressed only in the estrus phase. In the ovariectomized rats, a few of ER-$\alpha$, c-fos and c-jun immunoreactive cells were observed in the vaginal epithelium and no immunoreaction were found in the stromal cells. ER-$\alpha$ and c-fos immunoreaction fully expressed in the proestrus coincident with the cell proliferation, mutinous transformation and cornification of vaginal epithelium. These data indicate that vagina epithelium and stromal reals express multiple protein such as ER-$\alpha$, c-fos and c-iun by estrogen that may function in process of cells proliferation and differentiation of vagina epithelium.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.189-206
• /
• 2016

A breast model was for the human body was devised by studying a body scan and human body index of a desirable breast type. Thus, when manufacturing various 3D models, these results can accordingly become a fundamental basis for realizing a desirable breast model. This study aims to provide a basic data for designing the cup patterns of brassieres in order to improve the function and wearing comfort. The comfort of three kinds of brassieres were compared: one manufactured by the actual measured size; another manufactured as per the ratio of desirable upper and lower breast lengths; and the third manufactured by the 3D model attained by the desirable human body ratio. In this study, we suggest a process for realizing the desirable breast model using the ratio of bust breadth and waist front length, which are the components for deciding the appropriate position and size of breast, and which are easy to measure. The ideal breast shape is an equilateral triangle formed by connecting the nipple with the center of the clavicle. After deciding the interval between the nipples, this value can be used to configure the locations of nipples by drawing a tangent, with equal length, from the anterior neck point (which is the center of clavicle) to the nipple. Also, since inside points of breast do not exist, the outer point of breast, upper point of breast, and below point of breast on the same plane, and the depths from the nipple point to the respective points, are applied to simulate a 3D image, by modifications along the x, y, and z axes. Depending on the type of breast, the length from the center of shoulder to the nipple, the diameter of breast, upper length of breast, and the position of nipple, are different. In conical or protruding breast, the wearing sensation is better when the nipple point of brassiere was lifted, by modifying the upper and lower lengths of breast. Considering the wearing sensation and function of a brassiere, it was better to leave the wearer's size as it is and use a pad within the same cup, rather than increase the basal area of the breast in order to increase the volume.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.169-178
• /
• 1996

Target parameters such as water solubility index (WSI), intrinsic viscosity (IV), water holding capacity (WHC), oil holding capacity (OHC), soluble dietary fiber (SDF) and microstructure were investigated on three different screw configurations during twin-screw extrusion of wheat bran. WSI of raw wheat bran (RWB) was 13.7%, while that of extrudates ranged $16.3{\sim}23.2%$ when extruded using screw configurations with 5 reverse screw elements (RSE). It was found that the moisture content of RWB greatly affected WSI of extrudates. IV of wheat bran extrudates increased from 10.6 ml/g of RWB to $37.86{\sim}44.37\;ml/g$ of extrudates extruded using 3, 4 and 5 RSE, whose trend was highly related to the moisture content of RWB and the extrusion pressure. Multiplication of IV and soluble solid (SS) content exhibited good correlation $(R^2=0.85)$ with specific mechanical energy (SME). The results suggested that SS and molecular size are an important factor governed by the SME in solubilization of wheat bran. WHC increased with increasing feed rate and moisture content, while OHC decreased. SDF increased from 2.68% of RWB to $4.32{\sim}6.48%$ of extruded wheat bran, indicating the significant breakdown of cell wall components. Microstructure of the extrudates showed the distinct patterns of degradation and solubilization of cell wall structure, depending on the moisture content of RWB.

• Korean journal of food and cookery science
• /
• v.17 no.2
• /
• pp.156-164
• /
• 2001

Four different oligosaccharides used to determine their effects on gelatinization and retrogradation of Backsulgies(BSG), Korean traditional rice cake, were cyclodextrin, isomaltooligosaccharide, fructooligosaccharide and maltotetrose, with 3 or 6%(w/w), based on the rice flour. From the Amylograph and blue value data, adding 6% cyclodextrin into the rice flour fastened the gelatinzation process, and delayed the retrogradation in stored BSG at 4$\^{C}$ for up to 3 days, probably due to its cyclic structure. Using rheometer, the hardness of freshly made BSG added with cyclodextrin was significantly lower than that of control BSG, and increased with storage time in all BSGs at refrigerated temperature. When using maltotetrose in rice flour, the hardness of BSG was also significantly low, but slightly higher than that of cyclodextrin. Hunter “L” value in BSG decreased with the addition of oligosaccharides, but the higher the level of oligosaccharide in BSG, the insignificant the Hunter “a”,“b” values of BSG. From the X-ray diffraction studies, the rice flour showed typical A pattern, and the crystallinities of all BSG gave amorphous V type. The highest peaks of X-ray patterns in BSG added with 6% cyclodextrin or maltotetrose were, however, lower than that of the control, meaning the less crystalline, retrograded starch in the former BSGs. Based on sensory evaluation, BSG added with all oligosacchrides were not significantly different in taste, flavor, chewiness, moistness and overall preferences, with slightly darker color with longer storage time, compared to the control BSG.