• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.333-335
• /
• 2011

In the transmitting process of image processing system, images always be corrupted by impulse noise, especially random-valued impulse noise. So removing the random-valued impulse noise is very important, but it is also one of the most difficult case in image processing. The most famous method is the standard median filter, but at edge, the filter has a special feature which has a tendency to decrease the preserve. As a result, we proposed a filter that detection random-valued impulse noise firstly, next to use efficient method to remove the noise and preserve the details. And through the simulation, we compared with the algorithms and indicated that proposed method significant improvement over many other existing algorithms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.34-40
• /
• 2001

Aeroacoustic technology to improve the acoustic comfort in high-speed became a major topic in vehicle development process. Although most of wind noise reduction and sound quality improvements are possible with full vehicle, the countermeasures should be applied at the early design stage. Acoustic holography technology was used to identify the external wind noise sources of a vehicle in Hyundai Aeroacoustic Wind Tunnel. Microphone self-noise reduction techniques and several reference microphone positions are investigated in order to obtain proper results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.132-137
• /
• 2003

For the evaluation of acoustic noise of a DLP projector, vibration and sound characteristics of a DLP projector were studied. The acoustic noise of DLP projector could be classified into three categories, that is, the direct noise from a body of rotation, the air-bone noise generated from turbulence or vortex occurred during cooling process and the structural born noise produced by vibrating elements. Cooling fans and color filter wheel which rotates at 9000 rpm are main causes of acoustic noise induced in DLP projector. Since the structure of an optical module in a DLP projector can be excited by the excessive vibration of a color filter wheel, the structural design for anti-vibration should be considered. To make a reduction of overall acoustic noise, the anti-vibration design and the enclosing structure have been studied and applied to a color filter wheel.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.861-867
• /
• 2004

For the evaluation of acoustic noise of a DLP projector, vibration and sound characteristics of a DLP projector were studied. The acoustic noise of DLP projector could be classified into three categories, that is, the direct noise from a body of rotation, the air-bone noise generated from turbulence or vortex occurred during cooling process and the structural born noise produced by vibrating elements. Cooling fans and color filter wheel which rotates at 9000 rpm are main causes of acoustic noise induced in DLP projector. Since the structure of an optical module in a DLP projector can be excited by the excessive vibration of a color filter wheel, the structural design for anti-vibration should be considered. To make a reduction of overall acoustic noise, the anti-vibration design and the enclosing structure have been studied and applied to a color filter wheel.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.523-528
• /
• 2002

Topology optimization is widely accepted as a conceptual design tool for the product design. Since the resulted layout of the topology optimization is a kind of digital images represented by the density distribution, the seamless process is required to transform digital images to the CAD model for the practical use. In this paper, the general process to construct a CAD model is developed to apply for topology images based on elements. The node density and the morphology technique is adopted to extract boundary contour of the shape and remove the noise of images through erosion and dilation operation. The proposed method automatically generates point data sets of the geometric model. The process is integrated with Pro/Engineer, so that the engineer in practice can directly handle with curves or surface form digital images.

• 한국소음진동공학회논문집
• /
• 제20권8호
• /
• pp.734-741
• /
• 2010

In this paper, an intake RCV system for low noise turbo engine was developed through optimization process of a geometric path of compressor housing and an open rate of recirculation valve. At first, the critical customer requirement from voice of customer was defined and quality function deployment of an intake RCV system was executed. And then, the renovative concept design using pugh matrix method was selected as final concept for satisfaction of requirement. Simultaneously, system analysis was carried by function diagram and fishbone diagram. Next, control factors and levels for the optimal design were performed. And, the optimal design of an intake RCV system was studied using design of experiment. Conclusively, we achieved not only cancellation tip-out noise at the driving condition but also improvement of NVH commodity through optimization process of an intake RCV system, which is optimal configuration of compressor housing and recirculation valve.

• 한국정보통신학회논문지
• /
• 제13권2호
• /
• pp.376-381
• /
• 2009

영상의 압축, 인식 그리고 복원 등은 디지털 영상처리 기술의 한 부분으로 영상을 처리하는 가운데 잡음이 발생된다. 발생되는 잡음은 원 영상을 훼손하게 되며, 이러한 잡음으로부터 원 영상을 보존하는 것이 이미지 필터의 사용목적이다. 영상에 사용되는 기본적인 필터는 2차원 필터의 구조를 갖는다. 구현하는 방법에는 1차원 필터를 반복하여 사용하는 방법과 비분리형 2차원 영상 필터를 사용하는 방법이 있고 마스크를 이용하는 공간 영역의 필터 처리법은 후자에 속한다. 이러한 이미지는 기존의 1차 필터와 같이 잡음에 따라 각기 달리 사용되며, 임펄스 잡음 제거하기 위하여서는 다양한 메디안 필터가 사용되고 있다. 본 논문에서는 임펄스 잡음에 강한 변형된 메디안 필터를 제시하였으며, 향상된 성능을 확인하기 위해 기존의 제시된 필터와 비교하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.953-955
• /
• 2016

영상 처리 시스템의 신호는 전송과정에서 여러 가지 원인으로 열화가 발생된다. 열화는 영상 신호에 잡음이 첨가되는 것이며 열화를 발생시키는 대표적이 잡음에는 salt and pepper 잡음이 대표적이다. 따라서 본 논문에서는 salt and pepper 잡음 환경에서 훼손된 영상을 복원하기 위해, 국부 마스크을 8방향으로 세분화하여 각 방향의 화소 변화에 따라 가중치를 적용하여 처리하는 영상 복원 필터를 제안하였다. 그리고 개선 효과의 객관적 판단 기준으로 PSNR(peak signal to noise ratio)을 사용하여 기존의 방법들과 비교하였다.

• ETRI Journal
• /
• 제26권6호
• /
• pp.575-582
• /
• 2004

Fully-depleted silicon-on-insulator (FD-SOI) devices with a 15 nm SOI layer thickness and 60 nm gate lengths for analog applications have been investigated. The Si selective epitaxial growth (SEG) process was well optimized. Both the single- raised (SR) and double-raised (DR) source/drain (S/D) processes have been studied to reduce parasitic series resistance and improve device performance. For the DR S/D process, the saturation currents of both NMOS and PMOS are improved by 8 and 18%, respectively, compared with the SR S/D process. The self-heating effect is evaluated for both body contact and body floating SOI devices. The body contact transistor shows a reduced self-heating ratio, compared with the body floating transistor. The static noise margin of an SOI device with a $1.1\;{\mu}m^2$ 6T-SRAM cell is 190 mV, and the ring oscillator speed is improved by 25 % compared with bulk devices. The DR S/D process shows a higher open loop voltage gain than the SR S/D process. A 15 nm ultra-thin body (UTB) SOI device with a DR S/D process shows the same level of noise characteristics at both the body contact and body floating transistors. Also, we observed that noise characteristics of a 15 nm UTB SOI device are comparable to those of bulk Si devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1864-1866
• /
• 1999

The magnetic nondestructive test can be applied to evaluate the magnetic material characteristics and the fracture properties through the internal defects of SA-508 used in the pressure vessels of the nuclear power plants as the direct and accurate in-situ testing methods. The fracture toughness, yield strength and the stress distribution around the defects in the surface and sub-surface of magnetic materials can be directly estimated by Bark-hausen noise(BN) methods as NDT. The testing process of SA-508 by Barkhausen noise method was advanced by controlling the austenizing peak temperature and the time of maintenance at a constant austenizing peak temperature, therefore causing the variation of fracture toughness. Through above process. we can evaluate the variations of effective grain size and the correlation of effective grain size and FATT at each situation. And the stress distribution around the defects can be quantified nondestructively through Barkhausen method.