• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1280-1286
• /
• 2006

Three different virgin activated carbons made of each coal(Calgon), coconut(Samchully) and wood(Picabiol) based activated carbon(AC) were tested for an adsorption performance of 1,4-dioxane in a continuous adsorption column. Breakthrough behavior was Investigated that the breakthrough points of coal, coconut and wood based AC were observed as 3600 bed volumn(BV), 1440 BV and 144 BV respectively. Adsorption capacity(X/M) of coal, coconut and wood based AC was observed. The reported results of adsorption capacity showed that coal based AC was highest(578.9 ${\mu}g/g$), coconut based AC was intermediate(142.3 ${\mu}g/g$) and wood based AC was lowest(7.4 ${\mu}g/g$) due to increasing specific surface area. Moreover, carbon usage rates(CURs) for coal, coconut and wood based AC had been shown as 0.48 g/day, 1.41 g/day and 6.9 g/day respectively. The constant characteristic of the system, k of coal based AC was found to be 91.5 and k of coconut based AC was found to be 17.9. Removal efficiencies of 1,4-dioxane with different ozonation dosages(2 and 5 mg/L) for 20 min ozonation had been shown 38% and 87% respectively. There was no observation for biological removal of 1.4-dioxane by attached micro-organisms when used(3.1 years and over 5 years) biological activated carbon(BAC) without pretreatment of oxidation were employed. When a combination of ozonation(2 mg/L and 5 mg/L) and BAC process for $10{\sim}30$ min was applied, removal efficiency for 1,4-dioxine increased only $2{\sim}6%$ compared to only applying ozonation. Therefore removal efficiency of BAC process prior to using oxidation was proven to negligible. Consequently, the results presented in this paper provide a better insight into the adsorption performance of 1,4-dioxane. This observation suggests that using virgin activated carbon made of coal is the best selection for removal of 1,4-dioxane in the water treatment for an advanced treatment. It is clear from this research that longer EBCT for ozonation or higher ozone concentration are more effective operation methods for removal of 1,4-dioxane than longer EBCT in the BAC process.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.590-596
• /
• 2012

Enhanced coagulation is best available technologies to treat NOM in water to produce clean drinking water. In this research, the comparison experiments between conventional coagulation (CC) and enhanced coagulation (EC) using 4 type coagulants i.e., ferric chloride, aluminium sulphate (alum), poly aluminium sulphate organic magnesium (PSOM) and poly aluminium chloride (PACl) were performed in terms of surrogate parameters such as dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), haloacetic acid formation potential (HAAFP) and zeta potential variation in order to find out the most effective coagulant and conditions to fit Nakdong River water. When applied to EC process, the turbidity removal efficiency did not increased gradually compared to the CC process when adding coagulants. Furthermore, the removal efficiency of turbidity became decreased much more as coagulants were added increasingly whereas the removal efficiency of DOC, THMFP and HAAFP became increased by 13~18%, 9~18% and 9~18% respectively compared to the CC process. The characteristics of turbidity removal showed relatively high removal efficiency considering the pH variation in entire pH range when using $FeCl_3$ and PACl. Additionally, in case of alum and PSOM steady removal efficiency was shown between pH 5 and pH 8. In terms of DOC surrogate the coagulants including 4 type coagulants indicated high removal efficiency between pH 5 and pH 7. The removal efficiency of dissolved organic matter (DOM) in EC between less than 1 kDa and more than 10 kDa augmented by 11~21% and 16% respectively compared to the CC process. The removal efficiency of hydrophobic and hydrophilic organic matter proved to be increased by 27~38% and 11~15% respectively. In conclusion, the most effective coagulant relating to EC for Nakdong River water was proved to be $FeCl_3$ followed by PSOM, PAC and alum in order.

• 기호학연구
• /
• no.57
• /
• pp.7-26
• /
• 2018

The purpose of this paper is to interpret the discourse on design thinking through the perspective of Roland Barthes' Mythologies. To this end, this paper will explore the mythologization process of design thinking using the methodological framework of Barthes, which structurally interprets the connotations produced using semiosis. Design thinking originally refers to a method which is used in the process of planning ideas about designs in order to create the final products for professional designs. However, design thinking has recently attracted more interest from the public because it has become known as a tool for solving various problems which exist outside of the field of design, such as social issues, management, and marketing strategies. Barthes points out that myths are used as a tool to deliver ideologies. He also emphasizes the importance of 'structural thinking'. It interprets the inherent connotative meanings more than the denotative meanings, which are explicitly shown. One of the most powerful ideologies which our society embraces today is creativity. Design thinking realizes the manifestation of creativity through a schematized process. This can be explained by considering design thinking as an icon that is specifically turned into a figuration to realize its objectness, in which a discourse for solving issues and social codes meet together and form a mythology. The mythologies that Barthes cites in his book refer to mythical values created by the cultural codes which humans have produced in our modern and contemporary age. The symbolic value of design thinking has become more important than the signifier which design thinking itself presents. This means that design thinking has become a sign that has mythical properties. In other words, the ideology of creativity embodied by design thinking has attained a mythological status, as it produces a new cultural code through innovation. The process of interpreting a phenomenon using the perspective of semiotics is an important tool that allows us to examine the concept of an object and its surroundings thoroughly. This paper attempts to expand the external scope of critical analysis about social phenomena by using the signs which continuously reveal themselves in common ideologies, such as design thinking, which has been gaining more popularity recently.

• Journal of Venture Innovation
• /
• v.1 no.2
• /
• pp.47-59
• /
• 2018

With the recent, rapid changes in the socio-economic environment, organizations of today are now required to present a framework of realistic consumer behaviors based on psychology, economy, and finance, in order to understand their investing customers. Stock investors show differences in terms of their decisions or evaluations in the process of investing. This is due to what is called the 'framing effect.' The decision frames of the investors are defined differently, and, as a result, this affects the decisions made by the investors. Preceding studies on stock investment rarely touched the topic of the effect of message framing on market participants in their stock investment, especially regarding the differences in terms of their risk management behaviors based on the message framing in stock investment. Therefore, the purpose of this study is to examine the influence of stock investment message framing on market participants in their investment decision making and empirically validate whether this message framing effect has a moderating effect on the factors of investment satisfaction. For this, 494 participants with stock investment experiences were interviewed from May 1 to 26, 2018, and the results were used as the data for the empirical analysis. The analysis of the data was conducted using SPSS 22.0 statistical analysis software. The results of this study were as follows; First, of the stock investment behavioral factors, the stock comprehension, recommendation by others for a stock, and the degree of risks of a stock affected stock investment satisfaction in a positive manner. And, of the behavioral factors of stock investment, stock comprehension, stock brand, recommendation on the stocks from others, past performances, and risk levels of stocks affected the intent of continued stock investment in a positive manner. Second, message framing turned out to affect stock investment satisfaction in a positive manner, and it also had a significant moderating effect to the relationship between the stock investment behavior and stock investment satisfaction. Third, message framing was found to affect continued stock investment intent significantly, with a significant moderating effect in the relationship between stock investment behavioral factor and continued stock investment intent.

• Journal of Venture Innovation
• /
• v.1 no.1
• /
• pp.49-65
• /
• 2018

For a long time the German economy was primarily defined by large corporations and thriving small and medium-sized enterprises. Since about 2005 a second strand has started to emerge and it is one which is becoming increasingly important and is creating jobs - start-ups in the digital sector. This start-up activity is taking an important role in Germany's economic development: Start-up companies spawn innovations and create jobs, thus promoting the concept of competition. In general "start-up" refers to digitally-driven companies that are not more than five years old. Germany's start-up policy consists of three main parts. First of all, Germany has the characteristics of technology-based start-ups. The Hartz reform since 2002 has shown its focus on technology-based start-ups. In particular, it is the most appropriate for a start-up company to take the role of a new technology company to respond to changes in the global industrial structure. Second, it is approaching from a long-term perspective. In this regard, the small business policy, including Germany's new business policy, is seen as a tradition that can be consistent and can make policy decisions based on the basics rather than following the times. Third, the government is implementing policies centered on demand. Germany's start-up policy is summarized as a technology-based policy and new job creation. The policy response is that the government seeks the best combination of policies by adapting them to the times from the broad trend of employment market policies. What is important here is that policies are made based on consumers, not suppliers, in the process of policy making and implementation. With the Digital Agenda 2020 the Federal government has likewise committed itself to preparing the digital economy for international competition and making Germany the "No. 1 digital growth country in Europe". Ever since 1998 the Federal Ministry for Economic Affairs and Energy (BMWi) has awarded the "EXIST" start-up scholarship to students and graduates. The Ministry also invests in the High Tech start-up fund. Together with Kreditanstalt für Wiederaufbau (KfW) and 18 other investors from the world of business the seed investor promotes young technology companies. Germany offers start-ups a good infrastructure and lots of funding opportunities. Berlin is regarded as Europe's start-up capital and also attracts lots of international young entrepreneurs.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• Journal of Technology Innovation
• /
• v.24 no.4
• /
• pp.55-99
• /
• 2016

The paper investigates X-project, in which the public was invited to participate in a national R&D project, examines how X-project attracted the public's attention and involved them in a national R&D project, and discusses the significance and limitations of X-project. X-project was executed by a 12 citizen-led committee, financially supported by the Ministry of Science, ICT, and Future Planning, and backed by the Science and Technology Policy Institute. People raised 6,212 questions that reflected the severe needs they experienced in their daily lives through the online and offline platforms of X-project. In addition, the committee members, scholars, experts, government officials, and citizens gathered together to select the fifty most provocative and novel of the questions raised by the public, and invited public participation to answer the questions in innovative ways. 310 research teams including professional researchers from universities and institutes, high-school students, lay persons, and corporate workers applied for X-project, and 54 of these teams were finally selected to receive funding from the government. Through planning and conducting X-project, as well as interviewing and surveying the participants in X-project and non-participants, we found that there was an enormous social consensus on the necessity of public participatory national R&D projects. People asserted that science and technology should put a greater focus on solving social problems and satisfying public needs. We also confirmed that the public could take part in national R&D projects. Most of all, we found that the questions raised by the public were very challenging, novel, and complex, and thus researchers need break-through approaches to address them. It can be also argued that through experiencing the X-project citizens can regard themselves as ones who are not only recipients of the benefits of the development of science and technology, but also contributors of the development of them. We finally argue that there are some limitations to X-project in terms of how to provide diverse incentives that attract more participation, how to develop the process in which people got involved in the project in more easy ways, and how to create new ways for lay persons and professional researchers to cooperate in solving social problems.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.1
• /
• pp.127-152
• /
• 2017

China's utility model as a supplement to the invention patent, has short application duration, fast authorized speed, and has the same exclusive rights with patents, so companies can quickly dominate the market. But the utility model does not need to carry out substantive examination, so has lower stability, high frequency of invalid to accepted, so compare with the invention patent, difficult to be protected. In order to actively encourage the small and medium-sized enterprises to promote their inventions, and protect domestic patents, China established a protection policy of patent evaluation report for the utility model rights, especially the patent evaluation report can be used as evidence in a patent infringement trial, to provide judicial remedies for utility model patentee and the party of patent disputes. Many experts believe that the establishment of patent evaluation report system can improve the stability of the utility model patent right, and when the defendant request for invalidation of the patent right in the defense period, if there is no novelty, creativity lost or no other reason has not led to the stability of patent right given in a patent evaluation report of the utility model patents, the court may not suspend the trial, without having to wait for the Patent Reexamination Board makes the patent invalid declaration decisions, can improve the efficiency of the judicial process, accelerate the patentee's time. However, in practical patent infringement, the patent evaluation report system and invalidation system are in conflict. In this paper, through the analysis of the current China utility model system and compared with the South Korean utility model system, review the role and character of the patent evaluation report system, and through the actual cases of the utility model patent infringement litigation, analysis possible variates from the decision of patent evaluation report, to find out the reason of the patent evaluation report system being in conflict with the invalidation system, and research on the effectiveness for protecting Utility Model with China's Patent Evaluation Report.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.2
• /
• pp.284-309
• /
• 2007

Technology transfer (TT) consortium is an affiliation of two or more public research institutions (PRIs) that participate in a common technology transfer activity or pool their resources together, with the objective of facilitating technology transfer. Based on empirical analysis of five regional TT consortia (2002-2006) operating in Korea, this paper suggests their effectiveness by employing a TT performance index (TTPI) and identifies possible characteristics involved, such as motivations, facilitators, barriers, and challenges. TTPI devised in the paper is a new composite TT performance index to measure how much the TT performance of a PH changed in a designated year compared to a base year. All the performance indicators of TTPI are well-structured based on the unique TT process that is prevalent in Korea. Further, TTPI can bring different size and focus of PRIs to the same scale for comparison by double-normalizing. The paper tests the effectiveness of TT consortium for the escalation of TT performances in member PRIs by highlighting the differences of TTPI's between 2005 and 2001. As a result, the paper found that the escalation of TTPI for member PRIs was greater than that for non-member PRIs. As for the characteristics of TT consortia, their respective factors obtained by TT expert survey were computed with proportion tests of differences (Z tests) to compare two perspectives between intramural and extramural groups. One of key findings is that there is general homogeneity in stakeholder perspectives regarding motivations, facilitators, barriers, and challenges. Some notable responses are as follow; the most probable motivation to join TT consortium is to share or exchange TT competences for enhanced performance. Second, the most probable facilitator is professional capability of consortium-hired personnel. Third, the foremost probable barriers to effective TT consortium are frequent change of consortium director and passive participation of member PRIs. Lastly, both publicizing TT consortia and developing performance metrics are the most important for the improvement of TT consortia. The understanding of the characteristics of TT consortia increases the likelihood of accelerated success, because TT consortia path from formation to termination encompasses many concepts, processes, principles, and factors. Finally, an analysis of the survey data combined with expert interview and observation data led the authors to derive five conditions as being critical to viable TT consortia in Korea at early stage of technology transfer systems. These conditions include policy infrastructure, proactive participation, excellent professionals, personal motivation, and teaming mechanisms. It is expected that the Korean evidence is a starting point to develop and refine the theory of TT consortia and for additional studies in other countries.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.3
• /
• pp.61-102
• /
• 2007

This study empirically analyzed how human resource management(HRM) practices affect the performance of venture firms using The results of the study are as follows: First of all, several HRM practices were found to affect organizational performance significantly. Specifically, ${(1)}$ recruitment and selection practices were negatively related to turnover, which seemed to mean that effective staffing including development of good recruitment pools and rigorous selection process lower turnover, and ${(2)}$ training and development, compensation, and labor-management relations were positively related to subjective performance of the firms, which implied that as the venture firms provide more opportunities of training and development to employees, provide compensation on the basis of performance, and develop cooperative labor-management relations, the subjective performance of the venture firms Increases. Secondly, negative interaction effects were found to exist between competitive strategies and HRM practices on organizational performance. Specifically, ${(1)}$ the interaction between differentiation strategy and compensation were significantly related to turnover, ${(2)}$ HRM planning and training and development interacted with differentiation strategy to significantly affect subjective organizational performance, and ${(3)}$ HRM planning, selection, training and development, compensation and communication practices interacted with technology innovation strategy to affect subjective organizational performance. So far, there have not been many studies which deal with HRM practices of venture firms in Korea. Thus, it is hoped that this study stimulate more research efforts on theory development and empirical studies on HRM practices of venture firms. Also, it is hoped that government conduct more policy studies and provide more resources in HRM area of the venture firms. Specifically, it is suggested that government take proactive steps to improve industrial skilled staff and technical researcher systems in order to alleviate the problems of workforce shortages in venture firms. And it IS also suggested that regional human resource development programs be introduced with the participation of the firms, local governments, and universities.