• KSBB Journal
• /
• 제6권4호
• /
• pp.379-383
• /
• 1991

Pervaporation can be successfully utilized to recover alcohol from fermentation broths and dilute process streams. Polydimethylsiloxane (thickness: $60\mu$m), such as hydrophobic membrane have been employed in this application to produce an enriched product. The fermented alcohol was continuously extracted, and simultaneously concentrated by pervaporation, from the membrane bioreactor, and the extracted alcohol concentration was 6 to 10 times higher than in the broth. This experimental conditions were 6-10 Torr vacuum line, pH=5, $32^{\circ}C$, 3.5 liters of working volume, 200rpm of agitator speed, and 0.14 wm aeration flow rate.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.505-509
• /
• 2013

A low temperature ($65^{\circ}C$) thermal deposition process was developed for depositing a silver coating on thermally sensitive polymeric substrates. This low temperature deposition was achieved by chemical reduction of a silver alkylcarbamate complex with latent reducing agent. The effects of acetol as a latent reducing agent for the silver 2-ethylhexylcarbamate (Ag-EHCB) complex and their blend solutions were investigated in terms of reducing mechanism, and the size and shape of silver nanoparticles (Ag-NPs) as a function of reduced temperature and time, and PVP stabilizer concentration were determined. Low temperature deposition was achieved by combining chemical reduction with thermal heating at $65^{\circ}C$. A range of polymer film, sheet and molding product was coated with silver at thicknesses of 100 nm. The effect of process parameters and heat treatment on the properties of silver coatings was investigated.

• 멤브레인
• /
• 제7권2호
• /
• pp.57-64
• /
• 1997

새로운 분리공정으로서 Membrane Distillation(MD)에 대하여 고찰하였다. 정밀여과에서 이용되고 있는 소수성막이 MD공정에 적합한 막소재가 된다. MD는 고온보다는 완화된 온도에서 100%에 가까운 선택도를 가지면서 기존의 수처리 공정을 간소화시킬 수 있는 가능성이 있다. MD는 막표면의 기공에서 층기-액체간의 상분리가 일어나는 분리원리를 이용한다. 공급액 및 투과액의 온도, 조성, 막의 젖음현상, 열 및 물질전달이 MD의 선택도와 플럭스를 결정할 수 있다.

• 멤브레인
• /
• 제27권5호
• /
• pp.458-467
• /
• 2017

본 연구는 열유도 상분리법(thermally induced phase separation, TIPS)을 사용하여, 수처리 분리막에 적용하기 위해, 응고조의 열용량의 변화를 위해 서로 다른 두 용액의 함량을 조절하였다. 또한, 온도의 변화를 통해 분리막의 구조 변화에 대하여 관찰하였다. 분리막을 제조하기 위한 소재로는 수처리 분리막에 주로 이용되는 기계적 물성과 내화학성이 우수한 poly (vinylidene fluoride)(PVDF)를 사용하였고, 첨가제로 실리카를 이용하였다. 희석제는 PVDF와 호환성이 좋은 dioctyl phthalate (DOP), dibutyl phthalate (DBP)를 사용하였다. 응고액의 함량 변화에 따른 열용량 변화에 따라 제조된 분리막의 구조를 관찰하기 위해 SEM 이미지를 촬영하였다. 열용량이 증가할수록 PVDF의 결정화 속도가 느려져 큰 기공을 나타내며 열용량이 작을수록 결정화 속도가 증가하여 작은 기공이 생기는 것을 확인하였다.

• 한국군사과학기술학회지
• /
• 제19권1호
• /
• pp.35-42
• /
• 2016

Modern aircraft is facing the increase of power demands and thermal challenges. In accordance with the application of more electric technology and advanced mission requirement, aircraft system requires increase of power generation and it cause increase of internal heat generation. Simultaneously, restrictions have significantly been imposed to the thermal management system. Modern aircraft must maintain low radar observability and infra-red signature. In addition, new composite aircraft skins have reduced the amount of heat that can be rejected to the environment. The combination of these characteristics has increased the challenges faced by thermal management. In order to mitigate the thermal challenges, the concept of system level thermal management should be applied and new modeling and simulation tools need to be developed. To develop and utilize system level thermal management technology, three key points are considered. Firstly, the performance changes of subsystems and components must be assessed at an integrated thermal system. It is because that each subsystem and component interacts with other subsystems or components and it can directly effects on overall system performance. Secondly, system level thermal management requirements and solutions must be evaluated early in conceptual design process as vehicle and propulsion system configuration decisions are being made. Finally, new component level thermal management technologies must focus on reducing heat generation and increasing the availability of heat sinks.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.252-257
• /
• 2000

An efficient method is developed for mold thermal cycle analysis in repeated forming process, which is well suited to the analysis in TV glass production. plunger, which is a mold to press-form the glass, undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state in the end. If analyzed straightforwardly of this problem, it leads to more than 80 cycles to get reasonable solution, and it is yet hard to setup stopping creteria due to extremely slow convergence. An exponential fitting method is proposed to solve the problem, where an exponential function is found to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the function value at infinite time. From numerical implementation, it is found that the method reduces the number of cycles dramatically to only $6{\sim}15$ cycles to reach accurate solution within $1^{\circ}$ error. A system for the analysis is contructed, in which the thermal analysis is performed by commercial software ANSYS, and the fitting of the result is done by IMSL library.

• 한국전기전자재료학회논문지
• /
• 제24권9호
• /
• pp.766-772
• /
• 2011

Amorphous Si (a-Si) thin films of $p^+/p^-/n^+$ were deposited on $Si_3N_4$/glass substrate by using a plasma enhanced chemical vapor deposition (PECVD) method. These films were annealed at various temperatures and for various times by using a rapid thermal process (RTP) equipment. This step was added before the main thermal treatment to make the nuclei in the a-Si thin film for reducing the process time of the crystallization. The main heat treatment for the crystallization was performed at the same condition of $600^{\circ}C$/18 h in conventional furnace. The open-circuit voltages ($V_{oc}$) were remained about 450 mV up to the nucleation condition of 16min in the nucleation RTP temperature of $680^{\circ}C$. It meat that the process time for the crystallization step could be reduced by adding the nucleation step without decreasing the electrical property of the thin film Si for the solar cell application.

• 대한금속재료학회지
• /
• 제49권8호
• /
• pp.649-656
• /
• 2011

The present study evaluated the microstructures and mechanical properties of severely deformed Ni-30Cr alloys. Cross-roll rolling (CRR) process was introduced as a severe plastic deformation (SPD), and Ni-30Cr alloy sheets were cold rolled to 90% thickness reduction and subsequently annealed at $700^{\circ}C$ for 30 min to obtain the recrystallized microstructure. Electron back-scattering diffraction (EBSD) was introduced to analyze grain boundary character distributions (GBCDs). The application of CRR to the Ni-30Cr alloy was effective in enhancing the grain refinement through heat treatment; consequently, the average grain size was significantly refined from $33{\mu}m$ in the initial material to $0.6{\mu}m$. This grain refinement directly improved the mechanical properties, in which yield and tensile strengths significantly increased relative to those of the initial material. We systematically discuss the grain refinement and accompanying improvement of the mechanical properties, in terms of the effective strain imposed by CRR relative to conventional rolling (CR).

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.102-108
• /
• 2020

The demand for lightweight materials and high-strength steel has rapidly increased to help reduce the weight of a vehicle body; it improves the fuel efficiency of automobiles and provides passenger safety. Additionally, as the material becomes thinner, the demand for its resistance against corrosion becomes higher. Hence, the application of the surface-treated steel sheet has surged rapidly. In this study, a weld bonding experiment using a delta spot welding machine is performed on a thin sheet of a different material (Al6061-T6/GA440). The thickness of the material was kept at 1 mm to reduce the weight of the automobile body parts. Additionally, the purpose of this study is to control the heat input by applying the welding conditions of a multi-stage pressure pattern to improve corrosion resistance shear strength. The analysis of nugget diameter measurement, shear tensile test, and salt spray test was performed to achieve the aim.

• 한국인터넷방송통신학회논문지
• /
• 제20권6호
• /
• pp.77-83
• /
• 2020

열처리 시설은 뿌리산업 중에서 고열에 의한 열악한 환경과 긴 근로시간 등으로 원격 IOT 시스템의 적용 범위가 확대되는 상황이다. 이러한 열처리 공정 환경에서 IOT 미들웨어는 사물인터넷 기기(센서 등)의 데이터 정보를 해석하고 관리하며 제어할 수 있는 중추적 역할이 요구된다. 그간 열처리 원격에서 제어하는 시스템은 현장 상황에 대한 전반적 감시 없이 작업자의 일괄 시스템 명령으로 운영되었다. 하지만 열처리 시설의 안전성과 정밀한 제어를 위해서는 다양한 센서 컨트롤과 주변 작업환경 인지가 필요하다. 본 논문에서 제시한 열처리 안전지원 시스템은 그에 대한 해결책으로 열화상 감지를 통해 열처리로의 작업인력 접근을 파악하고 원격에서 작업 가동 시 열처리 장비의 Safety를 위한 지원시스템을 제안하였다. 또한 일반적인 고정된 열점 감시 기반 열화상 분석보다 더욱 빠르고 정확한 인식을 위해 DNN 딥러닝 네트워크를 활용한 OPEN CV 기반 열화상 분석 시스템을 구성하였다. 이를 통해 열처리 산업에 특성화된 안전관리 지원과 향후 열처리 환경에서 범용적으로 활용 할 수 있는 시스템을 제안하고자 한다.