• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1789-1794
• /
• 2003

As a new approach to analyze shear behaviors in the shear plane and chip-tool friction behaviors in the chip-tool contact region during an end milling process, this paper introduces a method to transform an end milling process to an equivalent oblique cutting process. In this approach, varying undeformed chip thicknesses and cutting forces in the up-and down-end milling process are replaced with the equivalent ones of oblique cutting. Accordingly, in the current paper, the shear and friction characteristics of end milling operations, up- and down-end milling, have been analyzed based on the equivalent oblique cutting models. Two series of cutting tests, up- and down-end milling tests and the equivalent oblique cutting tests to that, have been carried out to verify the validity of the analyses. And using the results of cutting tests the cutting characteristics of the up- and down-end milling processes have been thoroughly investigated.

• Korean Institute of Interior Design Journal
• /
• v.17 no.5
• /
• pp.40-50
• /
• 2008

This article examined the applicability of spatial configuration to Escher's works through configurative logics and rules and studied the contrasting relations among the unit elements in Escher's works and their characteristics and the creative process of the characteristics. As the results of the study on the bases to maintain and create the partial elements revealed as the characteristics, it was shown that Escher's sequential transformative works demonstrated diverse expressive characteristics as a creative process of Inter-complementary contrasting relations based on the independence of the unit elements. It was also shown that the creative process of the unit elements was actualized through the maintenance base of the fixed and absolute characteristic as the logic for the creation and the creation base of the dynamic and relative characteristic. Therefore, it was interpreted that by applying the logics for creation to Escher's unit elements through the spatial interpretation of the maintenance base and the creation base as well as by configuring the units created in such a way according to the characteristics of Escher's works, spatial possibility canbe derived out from Escher's contrasting tessellation works. The process of spatial configuration is the process to make a balance between various conditions, artists own understanding of the space and his/her intention of the space. From this viewpoint, the logics for maintenance base and for creation base seem to have the potentiality as a spatial configuration to consistently meet the given conditions as well as to derive out novelty through the transformation to maintain the fixed and absolute condition(base) and the characteristics of the independent(additional) transformation arising together with the implicit relations among the transformative units.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.639-646
• /
• 2015

A treatment for improving the characteristics of a surface is very important in increasing the life of machine parts. Many studies have been carried out on the surface characteristics after such treatments. For enhanced eco-technology, an alternative to a conventional chemical surface treatment process is essential. Ultrasonic nano-crystal surface modification (UNSM) technology is a physical environmentally friendly surface treatment method. This technology was developed in domestic and currently being used. As the mechanism of UNSM technology, a ball tip attached to an ultrasonic vibration device strikes the metal surface at nearly 20,000 times per second. The resulting modified surface layer improves the surface characteristics. This paper describes a self-developed fast tool servo system applied to the UNSM process as a vibration module within a high-frequency bandwidth. After describing the surface modification process based on the material and process changes, the surface characteristics are compared.

• Korean Institute of Interior Design Journal
• /
• no.13
• /
• pp.60-71
• /
• 1997

A study was performed for combination active process between the academical theory and practical design process based on creative thinking process in interior desigv. At first, it was investigated the concepts and characteristics of creativity combined with creativite process of thinking, and also scientific and art characteristics on interior design to be educated together with logical and esthetical concepts required for creative thinking process. In reference with above process, it was systematically established stepwise process of interior design with creative thinking system. As a resualt, creativity in interior design could develop a unique design process combined informations about knowledge and experiences with actual acquirements by individual's experiences. So interior design could be approachable and developed with open-mind and consistently scientific methodology. Also creativity power of interior design could be solved by strategic knowledge acquired by practical experiences and problem solving capability in special branches. Like this, all design activities, including interior design, would be accomplished theoretical background and actual design process under the concepts of practical intension and use. So it would be made creative products by means of detail adapation process based on the theoretical atmosphere, therefore it'll be strongly based on the hardnessing of theoretical value and power. Theory for design process referred to environmental concepts, so including interior design, would not be terminated as for theoretical concepts but be responsible for future of well-developed design by accomplishment of various design adaption method for practical purpose and objectives.

• Journal of the Korean Society of Earth Science Education
• /
• v.7 no.3
• /
• pp.371-380
• /
• 2014

The purpose of the research was to analyze the characteristics which appeared to the process of designing experiment for pre-service elementary teachers. This study were participated 26 pre-service elementary teachers. The findings indicated that first, the researcher figured out the process elements could constructed in 12 elements such as 'states problem or question, predicts outcome or hypothesizes, lists materials needed, arranges steps in sequential order, lists more than 3 steps, Explore variables and select one or more variables, plans to control variables, plans to measure and observation, plans data collection, plans to repeat testing and tells reason, states plan for interpreting data, states plan for making conclusion based on data, states plan for making conclusion based on data' but did not figure out 2 elements such as 'defines the terms of the experiment, practice safety'. second, the characteristics of pre-service elementary teachers in the process of designing experiment were as follows; pre-service elementary teachers designed experiments unstructured process listed types and showed the superficial level of the design experiment. The results show that the programs of designing experiment activity should be constructed with the process elements which were concentrated by pre-service elementary teachers, should provide feedbacks to design experiment more accurately.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1578-1584
• /
• 2002

Combustion stability is one of the most important factors that must be considered in burning of heavy fuel oil, especially low-grade oil. This paper describes the combustion characteristics of petrochemical process by- product in the combustion furnace of heavy fuel oil. Main experimental parameters were combustion load, excess 02, fuel preheating temperature and air/fuel ratio. The capacity of CRF(combustion research facility) used in this study was 1.0 ton/hr and the burner is steam jet type suitable far heavy oil combustion and manufactured by UNIGAS in Italy. The fuel used in this experiment were 0.5 B-C, petrochemical process by-product and 3 kinds of 0.5 B-C/process by-product mixtures. The combustion stability was monitored and exhaust gases such as CO, NOx, SOx and particulates were measured with the excess $O_2$ and combustion load. The main purpose of this study is to clarify whether process by-product can be used as a boiler fuel or not in consideration of flame stability and emission properties.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.245-260
• /
• 2015

The effect of salt milling process on the crystal size, morphology, and color characteristics of C.I. Pigment Red 57:1 was studied. The primitive morphology and color properties of the pigment after synthesis were studied in the former series work. The size and morphology of primary particles and the second aggregation features should be considered because they are very important to determine pigment quality. We compared the primary morphology of pigment particles before drying with the secondary aggregated morphology of pigment particles after drying and salt milling process. Morphological properties were investigated by particle size analysis, X-ray diffraction, and scanning electron microscopy and color measurement was carried out. Significant reduction in particle size as well as enhanced crystallite size after salt milling process was observed. This result might give a difference in color of the pigment, turning into brighter and more blue-toned red color. It was revealed that synthesis condition affect the morphology and color of the pigment even after milling. Increase in HCl concentration in the synthesis process enhanced crystal size and quality forming bluer-red pigments but an increase in $CaCl_2$ concentration resulted in more amorphous crystals forming darker-red pigments after salt milling.

• Journal of ILASS-Korea
• /
• v.10 no.2
• /
• pp.10-17
• /
• 2005

The proposed research has been performed to know the characteristics of cutting fluid aerosol formation using Dual-PDA system in machining process. The cutting fluid aerosol size and concentration is common attributes that quantify the environmental intrusiveness or air quality contamination. The atomized cutting fluid aerosols can be affected to human health risk such as lung cancer and skin irritations. Even though cutting fluid can be improved the machining quality and productivity in a carefully. its use must be controlled and optimized carefully. This experimental works using Dual-PDA were performed to analyze the cutting fluid aerosol behaviors and characteristics in turning process using precise aerosol particle measuring system. The obtained experimental results profovide basic knowledge to develop the environmentally conscious machining process. This results cail be provided as a basis to estimate and control the hazardous cutting fluid aerosol in machining process.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.5
• /
• pp.291-296
• /
• 2018

In this study, we carried out an ultrasonic-chemical decontamination process with immersion type, reproduced in the laboratory. The corrosion damage characteristics, depending on kind of materials and ultrasonic process time, were investigated. Inconel 600, which showed lower corrosion potential and higher corrosion current density than that of STS 316, revealed severer corrosion damage and higher weight-loss rate than STS 316. Weight-loss rate of Inconel 600 increased with increasing ultrasonic process time. On the other hands, STS 316 presented a negligibly small corrosion damage, which was almost indistinguishable from visual observation. There was no effect of ultrasonic process time on the weight-loss rate of STS 316.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.2
• /
• pp.1-7
• /
• 2005

In order to determine the wear Properties of PECVD ceramic coatings, wear process was evaluated using the coated pin of Falex Tribosystem. Coating materials deposited wear the TiC, TiN and Ti(CN). An experimental process was established to determine the tribological characteristics of friction and wear behavior under the variation of applied load, temperature and sliding distance by the Falex test machine. The experimental results indicate that TiN coating compared with TiC coating on e materials have e excellent friction and wear characteristics. However TiC coating compared i친 TiN coatings have a low friction coefficient with steel and good thermal stability, and Ti(CN) has the excellent anti-wear properly as well as the superiority of extreme pressure property. Compound coating compared wi simple coatings show improved tribological characteristics.